Opens in a new tab

STM32F207VGT6

120MHz ARM Cortex-M3 MCU, 1MB Flash, 128KB SRAM, Ethernet, USB HS, LQFP-100

2698

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F207VGT6

Package:

LQFP-100 (14.00 x 14.00 x 1.40 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F207VGT6 from STMicroelectronics is an ARM Cortex-M3 microcontroller running at 120 MHz with 1 MB Flash and 128 KB SRAM in an LQFP-100 package. Part of the STM32F2 Series, it features Ethernet MAC, USB 2.0 HS/FS OTG, two CAN buses, multiple timers, and extensive peripheral connectivity for demanding embedded applications.

Key Specifications

Core ARM Cortex-M3 @ 120 MHz
Flash Memory 1 MB
SRAM 128 KB (plus 64 KB CCM)
Ethernet MAC 10/100 Mbps IEEE 802.3
USB 2.0 HS/FS OTG with on-chip PHY
CAN 2 x CAN 2.0 B (Active)
ADC 3 x 12-bit, up to 6 MSPS
DAC 2 x 12-bit
Timers Up to 17 (including advanced motor control)
Operating Temperature -40°C to +85°C
Package LQFP-100 (14 x 14 mm)

Features

  • 120 MHz Cortex-M3 with 150 DMIPS and DSP instructions
  • Chrom-ART Accelerator for 2D graphics DMA operations
  • 1 MB Flash with read-out protection and ECC
  • 128 KB SRAM + 64 KB Core Coupled Memory (CCM)
  • Ethernet MAC with IEEE 1588 PTP support
  • USB 2.0 HS/FS OTG with dedicated 4 KB SRAM
  • Multiple communication interfaces: USART, SPI, I2C, CAN, SDIO

Applications

  • Industrial automation and motor control
  • Networked embedded systems with Ethernet
  • Medical devices and diagnostic equipment
  • Consumer electronics with USB connectivity
  • Smart grid and energy management systems
Product Introduction: STM32F207VGT6 Product Introduction

The STM32F207VGT6 is a high-performance ARM Cortex-M3 microcontroller from STMicroelectronics running at 120 MHz and delivering 150 DMIPS with DSP instructions. The device integrates 1 MB of Flash memory with read-out protection and error correction, plus 128 KB of general-purpose SRAM and 64 KB of Core Coupled Memory (CCM) for time-critical routines. The STM32F2 Series features ST’s adaptive real-time memory accelerator (ART Accelerator) and Chrom-ART 2D graphics DMA engine for efficient display operations. The peripheral set includes a 10/100 Mbps Ethernet MAC with IEEE 1588 Precision Time Protocol support, USB 2.0 HS/FS OTG with on-chip PHY and dedicated 4 KB SRAM, two CAN 2.0 B controllers, three 12-bit ADCs at up to 6 MSPS, two 12-bit DACs, and up to 17 timers including advanced motor control PWM. Housed in a 100-pin LQFP package, it provides up to 82 GPIO pins with extensive connectivity options.

Working Principle: STM32F207VGT6 Working Principle

The STM32F207VGT6 is built around an ARM Cortex-M3 processor core with a 3-stage pipeline executing Thumb-2 instructions at up to 120 MHz. The ART Accelerator uses an instruction cache, literal cache, and prefetch queue to minimize Flash wait states, allowing the core to achieve 150 DMIPS at zero wait-state throughput. The multi-AHB bus matrix connects the Cortex-M3, DMA controllers, and Ethernet MAC to three independent SRAM banks and the Flash, enabling concurrent access without contention. The CCM (Core Coupled Memory) is a zero-wait-state SRAM accessible only by the CPU, ideal for critical interrupt handlers and real-time algorithms. The Chrom-ART Accelerator is a dedicated DMA peripheral that offloads 2D graphics operations (fill, copy, blend) from the CPU. The Ethernet MAC implements the IEEE 802.3 MAC layer and connects to an external PHY via RMII or MII interface, with hardware support for IEEE 1588 timestamping. The USB OTG controller includes an on-chip full-speed PHY and interfaces to an external ULPI HS PHY for 480 Mbps operation.

Pin Description: STM32F207VGT6 Pin Definition and Functions
Pin Group Count Function
Power (VDD/VSS) 16 Multiple 3.3 V supply and ground pairs for I/O, analog, and core
VBAT 1 Battery backup supply for RTC and backup registers
VDDA/VSSA 2 Analog supply for ADC, DAC, and reset circuitry
NRST 1 System reset input (active low)
BOOT0 1 Boot mode selection
OSC_IN/OSC_OUT 2 Main oscillator (4-26 MHz HSE)
OSC32_IN/OSC32_OUT 2 32.768 kHz low-speed oscillator (LSE)
GPIO (Port A-I) 82 General-purpose I/O with alternate function mapping
BOOT1 1 Mapped to PB2; boot configuration pin

The LQFP-100 package provides 82 configurable GPIO pins across Ports A through I, each supporting up to 16 alternate functions for peripheral connectivity including Ethernet, USB, CAN, SPI, I2C, USART, ADC, DAC, timers, and SDIO.

Application Scenarios: In which products and applications is STM32F207VGT6 used
  • Industrial Ethernet Connectivity: Ethernet-based PLCs, remote I/O modules, and Modbus/TCP or Profinet gateways
  • Motor Control Systems: Multi-axis motor drive controllers using advanced PWM timers and ADC synchronization
  • Medical Instrumentation: Portable diagnostic devices with USB data transfer and precision analog measurement
  • Smart Grid and Energy: Power meters with Ethernet reporting, IEEE 1588 time sync, and multi-channel ADC sampling
  • Consumer Devices: Smart appliances and home automation controllers with USB and CAN connectivity
Alternative Models: What chips are recommended as replacements for STM32F207VGT6
Model Manufacturer Core Flash RAM Package Notes
STM32F407VGT6 STMicroelectronics Cortex-M4 @ 168 MHz 1 MB 192 KB LQFP-100 FPU, higher performance
STM32F207ZET6 STMicroelectronics Cortex-M3 @ 120 MHz 512 KB 128 KB LQFP-144 More GPIO, less Flash
SAM3X8E Microchip Cortex-M3 @ 84 MHz 512 KB 100 KB LQFP-144 Arduino Due MCU
LPC1768FBD100 NXP Cortex-M3 @ 100 MHz 512 KB 64 KB LQFP-100 Ethernet, USB, CAN
STM32F427VIT6 STMicroelectronics Cortex-M4 @ 180 MHz 512 KB 256 KB LQFP-100 Chrom-ART, FPU, DSP

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1