Opens in a new tab

ISO7140FCCDBQR

Quad-ch 4/0 digital isolator, 50Mbps, 2500Vrms, default-low, 16-SSOP

11546

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7140FCCDBQR

Package:

SSOP-16 (4.90 x 3.90 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7140FCCDBQR from Texas Instruments is a quad-channel, 4-forward/0-reverse, 50 Mbps digital isolator with basic insulation rating in a 16-SSOP (DBQ) package. With 2500 Vrms isolation, 25 kV/µs CMTI, and default low output (F suffix), it targets industrial communication interfaces and general-purpose isolation.

Key Specifications

Channels 4 (4 forward / 0 reverse)
Data Rate 50 Mbps
Isolation Voltage 2500 Vrms (DBQ package)
CMTI 25 kV/µs (min)
Propagation Delay 23 ns (typ)
Supply Voltage 2.7 V to 5.5 V
Current per Channel 1.025 mA (typ, DC)
Default Output Low (F suffix)
Operating Temperature -40°C to +125°C
Package 16-SSOP (DBQ)

Features

  • 50 Mbps maximum signaling rate for SPI and UART isolation
  • 4242 VPK transient isolation voltage
  • Integrated noise filter for robust operation in noisy environments
  • Low 1 mA per channel DC current consumption
  • Default output low (F suffix) for fail-safe operation
  • Safety certifications: UL 1577, DIN V VDE V 0884-10, CSA, CQC

Applications

  • RS-485, RS-232, and CAN bus isolation
  • SPI and UART interface isolation
  • Industrial fieldbus (Profibus, Modbus)
  • Motor drive isolation
  • Power supply digital interface isolation
Product Introduction: ISO7140FCCDBQR Product Introduction

The ISO7140FCCDBQR from Texas Instruments is a quad-channel digital isolator with all four channels in the forward direction (4/0 configuration) in a compact 16-pin SSOP (DBQ) package. The device provides 2500 Vrms isolation with basic insulation rating per UL 1577, 4242 VPK transient isolation per VDE 0884-10, and 25 kV/µs minimum common-mode transient immunity. The FCC variant features a 50 Mbps maximum data rate and default-low output when input power or signal is lost (F suffix), providing fail-safe behavior for communication interfaces. The capacitive SiO2 isolation barrier provides long-term reliability with an integrated noise filter for robust operation in noisy industrial environments. The wide 2.7 V to 5.5 V supply range supports level translation between different logic domains, and the low 1.025 mA per channel DC current consumption minimizes total system power.

Working Principle: ISO7140FCCDBQR Working Principle

The ISO7140FCCDBQR uses capacitive coupling through a double silicon dioxide (SiO2) insulation barrier to transfer digital signals across the isolation boundary. Each channel consists of an input buffer, a high-frequency modulator, two isolation capacitors, a demodulator, and an output buffer. The modulator encodes the input logic state into a high-frequency differential signal that passes through the isolation capacitors. The demodulator on the output side recovers the original logic level. An integrated noise filter on the input rejects narrow pulses that could be caused by electromagnetic interference. The F suffix indicates that if the input side loses power or the input signal is disconnected, the output defaults to a logic low state, which is the fail-safe condition for many communication protocols. The enable pins can put the outputs in high-impedance state for multi-master bus applications.

Pin Description: ISO7140FCCDBQR Pin Definition and Functions
Pin Name Function
1 VCC1 Side 1 supply voltage (2.7 V to 5.5 V)
2 IN1 Channel 1 input
3 IN2 Channel 2 input
4 IN3 Channel 3 input
5 IN4 Channel 4 input
6-8 GND1 Side 1 ground connections
9-11 GND2 Side 2 ground connections
12 OUT4 Channel 4 output
13 OUT3 Channel 3 output
14 OUT2 Channel 2 output
15 OUT1 Channel 1 output
16 VCC2 Side 2 supply voltage (2.7 V to 5.5 V)
Application Scenarios: In which products and applications is ISO7140FCCDBQR used
  • SPI Bus Isolation: Isolating 4-wire SPI (SCLK, MOSI, MISO, CS) between MCU and remote ADC or sensor
  • RS-485 Transceiver Isolation: Isolating TX, RX, DE, and RE control lines between MCU and RS-485 transceiver
  • Motor Drive Interface: Isolating PWM and fault signals between control MCU and gate driver
  • Industrial Fieldbus: Profibus, Modbus, and DeviceNet communication isolation
  • Power Supply Control: Isolating I2C or UART between primary and secondary side controllers
Alternative Models: What chips are recommended as replacements for ISO7140FCCDBQR
Model Manufacturer Ch Rate VISO Package Notes
ISO7740DBQR TI 4/0 100 Mbps 3000 Vrms SSOP-16 Higher speed, reinforced
ADuM1401BRWZ ADI 4/0 100 Mbps 2500 Vrms SOIC-16 Alternative from ADI
Si8641BB-B-IS Silicon Labs 4/0 150 Mbps 5000 Vrms SOIC-16 Higher speed and isolation
CNL4805M onsemi 4/0 25 Mbps 5000 Vrms SOIC-16 Lower speed, higher VISO
ISO7140CCDBQR TI 4/0 25 Mbps 2500 Vrms SSOP-16 Lower speed version

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1