Opens in a new tab

APL3511CBI-TRG

1A USB high-side power switch, 70mOhm, SOT-23-5, OCP/SCP/OTP

4449

Effective Inventory

Image for reference only

Manufacturer Part:

APL3511CBI-TRG

Package:

SOT-23-5 (2.90 x 1.60 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The APL3511CBI-TRG from Anpec/Diodes is a single-channel high-side power switch for USB applications in a SOT-23-5 package. With 70 mΩ on-resistance, 1 A current limit, and comprehensive protection features, it provides robust USB port power distribution in notebook and desktop computers.

Key Specifications

On-Resistance 70 mΩ (typ)
Current Limit 1 A (typ)
Supply Voltage 2.7 V to 5.5 V
Enable Logic Active high
Fault Output Open-drain OCB (active low)
Protection OCP, SCP, OTP, UVLO, reverse current block
Soft Start Yes
Output Discharge Yes
Operating Temperature -40°C to +85°C
Package SOT-23-5

Features

  • 70 mΩ N-channel MOSFET power switch for USB voltage drop compliance
  • Current limiting with short-circuit protection
  • Over-temperature protection at 140°C junction
  • Under-voltage lockout and reverse current blocking
  • Open-drain fault indicator output (OCB)
  • Output discharge function for fast turn-off
  • UL, Nemko, and TUV safety certifications

Applications

  • USB port power distribution switches
  • Notebook and desktop USB power
  • Hot-plug power management
  • Battery charger load switches
  • Portable device power routing
Product Introduction: APL3511CBI-TRG Product Introduction

The APL3511CBI-TRG is a single-channel high-side power switch from Anpec Electronics (available through Diodes Inc) in a compact SOT-23-5 package, specifically designed for USB port power distribution in notebook and desktop computers. The device integrates a 70 mΩ N-channel MOSFET power switch that meets USB voltage drop requirements, along with comprehensive protection circuitry including current limiting, short-circuit protection, over-temperature shutdown, under-voltage lockout, and reverse current blocking. The current limit is set at approximately 1 A to protect against overcurrent conditions while supporting USB 2.0 and USB 3.0 current requirements. The soft-start function limits inrush current during hot-plug events, and the output discharge function ensures rapid voltage decay when the switch is turned off. An open-drain fault indicator (OCB) signals overcurrent and over-temperature conditions to the host controller.

Working Principle: APL3511CBI-TRG Working Principle

The APL3511CBI-TRG operates as a high-side N-channel MOSFET switch with an internal charge pump generating the gate drive voltage above the supply rail. When the enable (EN) pin is driven high, the charge pump activates and ramps the gate voltage through a soft-start circuit, limiting the inrush current to the load. The current limit circuit monitors the MOSFET current through a sense element; when the current exceeds the 1 A threshold, the loop reduces the gate drive to maintain the current at the limit level. Under short-circuit conditions where VOUT drops below VIN – 1 V, the current limit is reduced to a lower safe level. The over-temperature protection monitors junction temperature and shuts down the switch at 140°C. The output discharge function activates an internal pull-down resistor on VOUT when the switch is disabled, discharging the load capacitance for clean turn-off. The OCB open-drain output asserts low during fault conditions.

Pin Description: APL3511CBI-TRG Pin Definition and Functions
Pin Name Function
1 OUT Switch output; connects to USB port VBUS
2 GND Ground connection
3 EN Enable input; active high to turn on the switch
4 OCB Open-drain fault indicator; active low during overcurrent/thermal fault
5 IN Switch input; connects to system 5 V supply
Application Scenarios: In which products and applications is APL3511CBI-TRG used
  • USB Port Power: Per-port power switch in notebook and desktop USB hubs with overcurrent and short-circuit protection
  • Hot-Plug Management: Soft-start controlled power insertion for removable peripherals and expansion modules
  • Battery Charger Switch: Load disconnect for USB charger input with reverse current blocking
  • Portable Device Power: Power routing switch in dual-battery or power-path management circuits
  • Peripheral Power Control: Selective power-on for USB peripherals in power-managed computing systems
Alternative Models: What chips are recommended as replacements for APL3511CBI-TRG
Model Manufacturer Ron Ilim Package Notes
APL3510CBI-TRG Anpec 70 mΩ 1 A SOT-23-5 Without output discharge
TPS2041BDBVR TI 70 mΩ 1.1 A SOT-23-5 TI equivalent
MAX890LETA+T Analog Devices 60 mΩ 1.2 A SOT-23-6 Lower Ron, higher Ilim
AP2141AUSD Diodes Inc 45 mΩ 2 A SOT-23-5 Higher current rating
RT9715GS Richtek 70 mΩ 1 A SOT-23-5 Pin-compatible alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1