Opens in a new tab

PIC16F876A-I/SO

8-bit PIC16 MCU, 20MHz, 14KB Flash, 368B RAM, 10-bit ADC, SOIC-28

5649

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F876A-I/SO

Package:

SOIC-28 (17.90 x 7.50 x 2.35 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC16F876A-I/SO from Microchip Technology is a 28-pin 8-bit Flash microcontroller with 14 KB program memory, 368 bytes RAM, 256 bytes EEPROM, and rich analog peripherals in an SOIC-28 package. Running at up to 20 MHz, it targets embedded control, data acquisition, and communication applications.

Key Specifications

Core PIC16 @ 20 MHz (200 ns instruction cycle)
Flash Memory 14 KB (8K x 14-bit words)
SRAM 368 bytes
EEPROM 256 bytes
ADC 5 channels, 10-bit
Communication MSSP (SPI/I2C), USART, PSP
I/O Pins 22
Timers 3 (Timer0 8-bit, Timer1 16-bit, Timer2 8-bit)
Operating Voltage 4.0 V to 5.5 V
Operating Temperature -40°C to +85°C
Package SOIC-28

Features

  • 14 KB Flash with 100,000 write/erase cycle endurance
  • 10-bit ADC with 5 input channels
  • MSSP module supporting SPI and I2C master/slave
  • USART with 9-bit address detection for multi-node communication
  • Capture/Compare/PWM (CCP) module
  • In-circuit debugging via ICSP interface

Applications

  • Industrial instrumentation and control
  • Motor speed regulation and monitoring
  • Serial communication adapters
  • Data acquisition and logging
  • Consumer appliance controllers
Product Introduction: PIC16F876A-I/SO Product Introduction

The PIC16F876A-I/SO from Microchip Technology is a 28-pin 8-bit Flash microcontroller based on the powerful PIC16 architecture with 14-bit wide instructions for efficient code density. The device features 14 KB of Flash program memory with 100,000 write/erase cycle endurance, 368 bytes of SRAM, and 256 bytes of data EEPROM. Running at up to 20 MHz with a 200 ns instruction cycle, it provides 5 MIPS performance. The rich peripheral set includes a 10-bit ADC with 5 input channels, an MSSP module supporting SPI and I2C master/slave modes, a USART with 9-bit address detection, a Capture/Compare/PWM (CCP) module, and three timers. The SOIC-28 surface-mount package provides 22 I/O pins, most with alternate peripheral functions. The ICSP interface supports in-circuit programming and debugging without removing the device from the board.

Working Principle: PIC16F876A-I/SO Working Principle

The PIC16F876A uses Microchip’s 14-bit PIC core with a two-stage instruction pipeline. Most instructions execute in a single cycle (200 ns at 20 MHz), with program branches taking two cycles. The 14-bit instruction word provides direct access to all 8 KB of program memory, 368 bytes of SRAM across four banks, and all SFR registers. The 10-bit successive approximation ADC converts analog inputs through an internal sample-and-hold circuit and channel multiplexer. The MSSP module implements SPI (master/slave with clock rates up to FOSC/4) and I2C (master/slave at up to 400 kHz) protocols in hardware. The USART supports asynchronous serial communication at up to 375 kBaud and synchronous communication at up to 5 MHz. The CCP module provides 16-bit capture, 16-bit compare, and 10-bit PWM functions. The 256-byte EEPROM provides non-volatile data storage accessible through SFR registers with built-in write-erase timing.

Pin Description: PIC16F876A-I/SO Pin Definition and Functions
Pin Group Count Function
VDD/VSS 4 Power supply and ground
PORTA (RA0-RA5) 6 ADC inputs, comparator, VREF, Timer1 oscillator, MCLR
PORTB (RB0-RB7) 8 Interrupt-on-change, ICSP (PGC/PGD), external interrupt
PORTC (RC0-RC7) 8 T1OSO/T1OSI, CCP, SPI/I2C (SDA/SCL/SCK/SS), USART (TX/RX), PWM
Application Scenarios: In which products and applications is PIC16F876A-I/SO used
  • Industrial Data Acquisition: Multi-channel analog sensor measurement with 10-bit ADC and serial data transmission via USART or SPI
  • Motor Speed Control: CCP-based PWM generation for brushed DC motor drives with tachometer feedback
  • Serial Protocol Bridge: I2C-to-UART or SPI-to-UART protocol conversion for communication adapter modules
  • Consumer Appliance: Temperature and humidity monitoring with LCD display driver and relay control in HVAC systems
  • Embedded Instrumentation: Low-cost measurement instruments with 10-bit ADC, EEPROM calibration storage, and RS-232 output
Alternative Models: What chips are recommended as replacements for PIC16F876A-I/SO
Model Manufacturer Flash RAM Speed Package Notes
PIC16F877A-I/PT Microchip 14 KB 368 B 20 MHz TQFP-44 More I/O, same die
PIC18F2520-I/SO Microchip 32 KB 1.5 KB 40 MHz SOIC-28 PIC18 upgrade, same pinout
ATmega328P-AU Microchip 32 KB 2 KB 20 MHz TQFP-32 AVR alternative
PIC16F1786-I/SO Microchip 14 KB 1 KB 32 MHz SOIC-28 More RAM, faster, 12-bit ADC
PIC16F1827-I/SO Microchip 14 KB 1 KB 32 MHz SOIC-28 Enhanced mid-range core

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1