Opens in a new tab

AD8605ARTZ-REEL7

Precision CMOS op-amp, 45uV Vos, 4.8nV/sqrtHz, RRIO, SOT-23-5

6940

Effective Inventory

Image for reference only

Manufacturer Part:

AD8605ARTZ-REEL7

Package:

SOT-23-5 (2.90 x 1.60 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AD8605ARTZ-REEL7 from Analog Devices is a precision, low-noise, rail-to-rail input and output single CMOS op-amp in a SOT-23-5 package. With 45 µV offset, 0.5 µV/°C drift, and 4.8 nV/√Hz noise, it is designed for precision signal conditioning in battery-powered and space-constrained applications.

Key Specifications

Offset Voltage 45 µV (typ), 400 µV (max)
Offset Drift 0.5 µV/°C (typ)
Input Bias Current 0.2 pA (typ)
Voltage Noise 4.8 nV/√Hz @ 1 kHz
GBW 5.5 MHz
Slew Rate 3 V/µs
Supply Voltage 2.7 V to 5.5 V
Supply Current 850 µA (typ)
Operating Temperature -40°C to +125°C
Package SOT-23-5

Features

  • Ultra-low 45 µV typical offset voltage with 0.5 µV/°C drift
  • Rail-to-rail input and output for maximum dynamic range
  • Low 4.8 nV/√Hz voltage noise
  • Sub-pA input bias current for high-impedance sensor interfaces
  • 5.5 MHz GBW with only 850 µA supply current
  • Single-supply operation from 2.7 V to 5.5 V

Applications

  • Precision sensor signal conditioning
  • Medical instrumentation amplifiers
  • Photodiode transimpedance amplifiers
  • Battery-powered measurement systems
  • Active filters and integrators
Product Introduction: AD8605ARTZ-REEL7 Product Introduction

The AD8605ARTZ-REEL7 from Analog Devices is a single-channel precision CMOS operational amplifier in a compact SOT-23-5 surface-mount package. The device combines ultra-low input offset voltage (45 µV typical), low offset drift (0.5 µV/°C), low voltage noise (4.8 nV/√Hz at 1 kHz), and sub-pA input bias current (0.2 pA typical) in a rail-to-rail input/output architecture. The 5.5 MHz gain-bandwidth product and 3 V/µs slew rate support a wide range of precision signal conditioning applications while consuming only 850 µA supply current from a 2.7 V to 5.5 V single supply. The SOT-23-5 package minimizes board area for space-constrained designs. The REEL7 suffix indicates 3000-unit tape and reel packaging. The AD8605 is part of a family that includes the dual AD8606 and quad AD8608 variants.

Working Principle: AD8605ARTZ-REEL7 Working Principle

The AD8605ARTZ uses a proprietary DigiTrim CMOS process with post-package trimming to achieve the 45 µV typical offset voltage. The input stage uses a folded-cascode architecture with rail-to-rail input common-mode range achieved by paralleling N-channel and P-channel input pairs. A transition region exists between the two pairs (approximately 1.5 V below VDD), but DigiTrim minimizes the offset shift across this region. The output stage uses a common-source PMOS driver with active pull-up, achieving rail-to-rail output swing within millivolts of both supply rails at light loads. The 4.8 nV/√Hz voltage noise is among the lowest for CMOS amplifiers, achieved through careful design of the input pair geometry and bias current optimization. The internal compensation provides stable unity-gain operation with capacitive loads up to several hundred picofarads.

Pin Description: AD8605ARTZ-REEL7 Pin Definition and Functions
Pin Name Function
1 -IN Inverting input
2 V- Negative supply (or GND for single-supply operation)
3 +IN Non-inverting input
4 OUT Amplifier output
5 V+ Positive supply (2.7 V to 5.5 V)
Application Scenarios: In which products and applications is AD8605ARTZ-REEL7 used
  • Precision Sensor Conditioning: Transimpedance and voltage amplification for strain gauges, pressure sensors, and RTD interfaces with sub-pA bias current
  • Medical Instrumentation: ECG/EEG preamplifier stages requiring low noise, low offset, and high input impedance
  • Photodiode TIA: Low-noise transimpedance amplifier for precision optical measurement with sub-pA bias current
  • Battery-Powered Measurement: Portable multimeter and data logger analog front-ends with 850 µA supply current
  • Active Filters: Precision Sallen-Key and MFB filters for anti-aliasing and signal conditioning with low offset drift
Alternative Models: What chips are recommended as replacements for AD8605ARTZ-REEL7
Model Manufacturer Vos Noise GBW Package Notes
AD8606ARMZ-REEL7 ADI 45 µV 4.8 nV/√Hz 5.5 MHz MSOP-8 Dual version
MCP6001T-I/SN Microchip 200 µV 19 nV/√Hz 1 MHz SOT-23-5 Lower cost, lower perf
OPA333AIDBVR TI 2 µV 55 nV/√Hz 350 kHz SOT-23-5 Zero-drift, lower noise BW
ADA4522-1ARJZ-R7 ADI 5 µV 5.8 nV/√Hz 2.7 MHz SOT-23-5 Zero-drift, higher voltage
TLV333AIDBVR TI 6 µV 55 nV/√Hz 350 kHz SOT-23-5 Zero-drift, micro-power

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1