Opens in a new tab

5M160ZE64I5N

MAX V CPLD, 160 LE / 128 MC, 7.5ns, 1.8V core, EQFP-64

14149

Effective Inventory

Image for reference only

Manufacturer Part:

5M160ZE64I5N

Package:

EQFP-64 (7 × 7 × 1.55 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 5M160ZE64I5N is a MAX V CPLD from Intel (formerly Altera), featuring 160 logic elements (128 macrocells) in a low-cost, low-power, non-volatile architecture. It offers instant-on configuration (0.5 ms or less), standby current as low as 25 µA, and MultiVolt I/O supporting 1.2 V to 3.3 V logic levels, packaged in a 64-pin EQFP.

Key Specifications

  • Logic Elements: 160 (128 equivalent macrocells)
  • Pin-to-Pin Delay: 7.5 ns
  • User Flash Memory: 8 Kbits (up to 1000 read/write cycles)
  • Core Supply: 1.8 V single external supply
  • MultiVolt I/O: 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V
  • Standby Current: 25 µA typ
  • Internal Oscillator: Yes
  • JTAG ISP: IEEE 1149.1 compliant
  • I/O Banks: 2
  • Maximum I/O: 54
  • Operating Temperature: -40°C to +100°C (I grade)
  • Package: EQFP-64 (7 × 7 mm)

Features

  • Non-volatile, instant-on CPLD (no external configuration needed)
  • Ultra-low standby power (25 µA)
  • Emulated LVDS output up to 304 Mbps
  • Emulated RSDS output up to 200 Mbps
  • Programmable slew rate and drive strength per pin
  • Schmitt trigger inputs for noise tolerance
  • Hot-socket compliant
  • On-chip user flash memory for non-volatile storage

Applications

  • Board-level glue logic and address decoding
  • I/O expansion and bus bridging
  • Power sequencing and supervisory logic
  • Configuration controller for FPGAs
  • Industrial control state machines
Product Introduction: 5M160ZE64I5N Product Introduction

The 5M160ZE64I5N is a member of Intel’s MAX V CPLD family, built on a low-cost, low-power, non-volatile architecture using 180 nm process technology. With 160 logic elements organized as 128 equivalent macrocells and 8 Kbits of user flash memory, the device provides flexible combinational and sequential logic capabilities. The instant-on configuration (0.5 ms) eliminates the need for external configuration devices, simplifying board design. The MultiVolt I/O interface supports 1.2 V to 3.3 V logic levels across two I/O banks, enabling mixed-voltage system integration. Standby current as low as 25 µA makes it ideal for battery-powered applications. The device supports JTAG in-system programming and features Schmitt trigger inputs for noise-tolerant operation.

Working Principle: 5M160ZE64I5N Working Principle

The MAX V CPLD uses a non-volatile flash-based architecture where the configuration is stored on-chip, enabling instant-on operation without external configuration devices. Logic is implemented through Logic Array Blocks (LABs), each containing 10 logic elements (LEs). Each LE contains a 4-input look-up table (LUT), a programmable register, and carry/chain logic. Interconnect routing between LABs is configured during programming. The MultiVolt I/O architecture separates core (1.8 V) and I/O (1.2-3.3 V) supplies, allowing direct connection to different voltage domains. The 8 Kbit user flash memory block provides non-volatile storage for calibration data or serial numbers. JTAG interface enables in-system programming and boundary-scan testing per IEEE 1149.1.

Pin Description: 5M160ZE64I5N Pin Definition and Functions
Pin Name Description
1 VCCIO1 I/O Bank 1 Supply (1.2-3.3V)
2 IO/DATA0 Dual-purpose I/O / JTAG Data
3-6 IO General Purpose I/O
7 GND Ground
8-15 IO General Purpose I/O
16 TCK JTAG Clock
17 TMS JTAG Mode Select
18 TDI JTAG Data Input
19 TDO JTAG Data Output
20-31 IO General Purpose I/O
32 VCCINT Core Supply (1.8V)
33-48 IO/GND I/O and Ground
49 VCCIO2 I/O Bank 2 Supply (1.2-3.3V)
50-64 IO/GND I/O and Ground
Application Scenarios: In which products and applications is 5M160ZE64I5N used
  • Board-Level Glue Logic: Address decoding, chip select generation, and bus arbitration in multi-device systems
  • Power Sequencing: Multi-rail power-up/down control with precision timing for FPGAs and processors
  • I/O Expansion: Interface bridging between different voltage domains (1.2V-3.3V) using MultiVolt I/O
  • FPGA Configuration Controller: Non-volatile storage and sequencing for SRAM-based FPGA boot-up
  • Industrial State Machines: Deterministic, instant-on control logic for safety-critical industrial applications
Alternative Models: What chips are recommended as replacements for 5M160ZE64I5N
Model Brand LEs MCs Package
5M40ZE64I5N Intel 40 32 EQFP-64
5M80ZE64I5N Intel 80 64 EQFP-64
EPM240F100I5N Intel 240 192 TQFP-100
XC2C64A-7VQG44I Xilinx 64 64 QFP-44
MachXO2-1200HC Lattice 1280 – TQFP-100

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1