Opens in a new tab

ISO7761FDBQ

6-ch 1/5 reinforced digital isolator, 100Mbps, 3kVrms, default low, SSOP-16

11674

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7761FDBQ

Package:

SSOP-16 (DBQ) (4.9 × 3.9 × 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7761FDBQ from Texas Instruments is a robust EMC, six-channel, 1/5 (1 forward / 5 reverse), reinforced digital isolator with default output low (F suffix) in a 16-SSOP package. It provides 100 Mbps data rate, 3000 Vrms isolation, and 85 kV/µs minimum CMTI, ideal for bidirectional communication across isolation barriers.

Key Specifications

  • Channels: 6 (1 forward / 5 reverse)
  • Data Rate: 100 Mbps
  • Propagation Delay: 10.7 ns typ @ 5 V
  • Isolation Voltage: 3000 Vrms (DBQ package)
  • Surge Isolation: 10 kVPK
  • CMTI: 85 kV/µs min, ±100 kV/µs typ
  • Supply: 2.25 V to 5.5 V
  • Default Output: Low (F suffix)
  • Creepage/Clearance: 3.7 mm min
  • Operating Temperature: -55°C to +125°C
  • Package: SSOP-16 (DBQ) (4.9 × 3.9 mm), MSL 2

Features

  • Robust EMC performance (IEC 61000-4-2, ±8 kV contact across barrier)
  • Reinforced isolation per DIN EN IEC 60747-17
  • UL 1577, IEC 61010-1/62368-1/60601-1 certified
  • Enable pins for output high-impedance
  • Isolation life > 30 years at 1500 VRMS working voltage

Applications

  • Isolated SPI communication (1 CS forward + 5 data return)
  • Industrial automation I/O isolation
  • Motor drive feedback isolation
  • Medical equipment signal isolation
  • Isolated RS-485/CAN interfaces
Product Introduction: ISO7761FDBQ Product Introduction

The ISO7761FDBQ from Texas Instruments is a six-channel reinforced digital isolator with a 1 forward / 5 reverse channel configuration, optimized for isolated communication interfaces where a single control signal traverses the barrier in one direction while multiple data or status signals return in the opposite direction. This asymmetrical channel arrangement is particularly suited for isolated SPI interfaces where chip select (CS) is the forward channel and data return paths (MISO, fault, and status flags) use the five reverse channels. The device supports 100 Mbps data rate with 10.7 ns typical propagation delay at 5 V supply. The dual-capacitor SiO2 insulation barrier provides 3000 Vrms isolation voltage with 85 kV/µs minimum CMTI and robust EMC performance including ±8 kV IEC 61000-4-2 contact discharge protection. Comprehensive safety certifications (DIN EN IEC 60747-17, UL 1577, IEC 61010-1/62368-1/60601-1) cover industrial and medical applications.

Working Principle: ISO7761FDBQ Working Principle

The ISO7761FDBQ uses capacitive isolation technology with dual SiO2 dielectric barriers. Each channel consists of an input modulator, two isolation capacitors, and an output demodulator. The single forward channel transmits signals from Side 1 to Side 2, while the five reverse channels transmit from Side 2 to Side 1. Digital signals are modulated into high-frequency differential pulses, transmitted across the capacitive barriers, and demodulated back to the original logic levels. The dual-capacitor architecture provides excellent common-mode transient immunity (85 kV/µs minimum). The F suffix version includes default-low output circuits that hold outputs in a defined low state when input power is absent or during UVLO events. Enable pins on both sides can place outputs in high-impedance state for power conservation or bus sharing.

Pin Description: ISO7761FDBQ Pin Definition and Functions
Pin Name Description
1 VCC1 Side 1 Supply (2.25-5.5 V)
2 OUT1 Forward Channel 1 Output (Side 2 → Side 1 direction, default low)
3-7 OUT2-OUT6 Reverse Channel Outputs (Side 2 signals returned to Side 1, default low)
8 GND1 Side 1 Ground
9 GND2 Side 2 Ground
10 IN1 Forward Channel 1 Input (Side 1 → Side 2)
11-15 IN2-IN6 Reverse Channel Inputs (Side 2 inputs)
16 VCC2 Side 2 Supply (2.25-5.5 V)
Application Scenarios: In which products and applications is ISO7761FDBQ used
  • Isolated SPI Interface: 1 forward (CS) + 5 reverse (MISO, fault, status) channel configuration for isolated ADC/Sensor SPI communication
  • Motor Drive Signal Isolation: 1 forward (PWM enable) + 5 reverse (encoder, fault, current sense) for inverter feedback
  • Industrial I/O Modules: Asymmetric channel count matches typical PLC input module topology (1 command + 5 status returns)
  • Medical Equipment: IEC 60601-1 compliant isolation for patient-connected equipment with multiple return signals
  • Isolated RS-485: 1 forward (TX enable) + 5 reverse (RX, DE, fault) for isolated transceiver control
Alternative Models: What chips are recommended as replacements for ISO7761FDBQ
Model Brand Channels Speed (Mbps) Viso (Vrms)
ISO7760FDBQ TI 6 (0/6) 100 3000
ISO7762FDBQ TI 6 (2/4) 100 3000
ISO7742FDBQ TI 4 (2/2) 100 3000
ADuM7642 ADI 4 (2/2) 25 3750
Si8625 Silicon Labs 6 (1/5) 150 5000

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1