Opens in a new tab

NXS0108PW-Q100J

8-bit bidirectional level translator, 1.2-3.6V/1.65-5.5V, auto-sense, 110Mbps, AEC-Q100, TSSOP-20

2020

Effective Inventory

Image for reference only

Manufacturer Part:

NXS0108PW-Q100J

Package:

TSSOP-20 (6.5 × 4.4 × 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NXS0108PW-Q100J from Nexperia is an 8-bit dual-supply translating transceiver with auto direction sensing in a TSSOP-20 package, qualified to AEC-Q100 Grade 1 for automotive applications. It enables bidirectional voltage level translation between 1.2 V-3.6 V (VCCA) and 1.65 V-5.5 V (VCCB) logic domains, supporting push-pull data rates up to 110 Mbps without a direction control pin.

Key Specifications

Channels 8-bit bidirectional
VCCA Range 1.2 V to 3.6 V
VCCB Range 1.65 V to 5.5 V
Max Data Rate (Push-Pull) 110 Mbps
Propagation Delay 6.3 ns typ
Output Drive 1.0 mA (push-pull)
Direction Control Auto-sensing (no direction pin)
Operating Temperature -40°C to +125°C
Qualification AEC-Q100 Grade 1
Package TSSOP-20

Features

  • Auto direction sensing eliminates direction control pin
  • I/OFF circuitry for partial power-down protection
  • ESD: HBM >15 kV on B-port, IEC 61000-4-2 >8 kV contact
  • Inputs accept voltages up to 5.5 V
  • Open-drain and push-pull signal support
  • Flow-through pinout for easy PCB routing

Applications

  • Automotive infotainment and ADAS
  • I2C/SMBus level translation
  • GPIO voltage bridging
  • Smartphone and tablet interfaces
  • Industrial communication bus bridging
Product Introduction: NXS0108PW-Q100J Product Introduction

The Nexperia NXS0108PW-Q100J is an 8-bit dual-supply translating transceiver with auto direction sensing, qualified to AEC-Q100 Grade 1 for automotive use. It provides bidirectional voltage level translation between any two logic voltage nodes from 1.2 V to 5.5 V without requiring a direction control signal. The auto-sensing architecture detects the direction of data flow on each channel independently, making it ideal for open-drain buses like I2C and SMBus. With 110 Mbps push-pull data rate, 6.3 ns propagation delay, and comprehensive ESD protection including IEC 61000-4-2 contact discharge exceeding 8 kV on the B-port, it is well-suited for automotive and industrial interface bridging.

Working Principle: NXS0108PW-Q100J Working Principle

The NXS0108PW-Q100J uses an auto-direction sensing architecture where each of the 8 channels independently detects which side (A or B) is driving the signal. Each channel has one-time direction sensing circuitry that samples the initial edge to determine data flow direction, then establishes the translation path. VCCA sets the reference for A-port I/O, and VCCB sets the reference for B-port I/O. The output enable (OE) pin controls all channels simultaneously; when OE is low, all outputs enter a high-impedance state. I/OFF circuitry ensures that if either supply is removed, the device enters a low-power state without backflow current, protecting upstream circuitry during partial power-down conditions.

Pin Description: NXS0108PW-Q100J Pin Definition and Functions
Pin Name Description
1 GND Ground
2 refA Reference Voltage A
3-10 A1-A8 Data I/O Port A
11-18 B8-B1 Data I/O Port B
19 refB Reference Voltage B
20 OE Output Enable (Active High)
Application Scenarios: In which products and applications is NXS0108PW-Q100J used
  • Automotive I2C Bridging: Level translation between 1.8 V MCU and 3.3 V/5 V sensor peripherals in ADAS modules
  • Infotainment Systems: GPIO voltage bridging between application processor and automotive CAN/LIN transceivers
  • SMBus/PMBus: Open-drain bus translation for power management IC communication in server and telecom systems
  • Industrial Communication: 110 Mbps push-pull level shifting between FPGA (1.2 V) and 5 V logic peripherals
  • Smartphone Peripherals: Multi-voltage I/O expansion with auto-direction for I2C sensor hubs and display interfaces
Alternative Models: What chips are recommended as replacements for NXS0108PW-Q100J
Model Brand Channels VCCA/VCCB Qualification
NXS0108BQ-Q100 Nexperia 8 1.65-3.6/2.3-5.5 AEC-Q100
LSF0108PW-Q100 Nexperia 8 0.95-5.5 AEC-Q100
TXB0108PWR TI 8 1.2-3.6/1.65-5.5 Non-auto
PCA9306DCTR TI 2 1.0-3.6/1.8-5.5 Non-auto
SN74AVCH16T245GR TI 16 1.2-3.6/1.2-3.6 Non-auto

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1