Opens in a new tab

SG3525AP013TR

Voltage-mode PWM controller, 8-35V, 100Hz-400kHz, dual totem-pole output, SO-16

5123

Effective Inventory

Image for reference only

Manufacturer Part:

SG3525AP013TR

Package:

SO-16 (10.0 × 4.0 × 1.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SG3525AP013TR from STMicroelectronics is a voltage-mode pulse width modulator (PWM) controller in an SO-16 package, designed for switching power supply applications. It operates from 8 V to 35 V, generates PWM signals from 100 Hz to 400 kHz, and features dual totem-pole output drivers capable of sourcing or sinking over 200 mA, making it ideal for push-pull and half-bridge converter topologies.

Key Specifications

Topology Push-pull voltage mode PWM
Supply Voltage 8 V to 35 V
Oscillator Frequency 100 Hz to 400 kHz
Reference Voltage 5.1 V ±1%
Output Current 500 mA peak (source/sink)
Maximum Duty Cycle 49%
Rise Time 600 ns
Fall Time 300 ns
Operating Temperature 0°C to +70°C
Package SO-16 (10 × 4 × 1.6 mm)

Features

  • Dual source/sink totem-pole output drivers
  • Latching PWM to prevent multiple pulses
  • Pulse-by-pulse shutdown capability
  • Internal soft-start with external capacitor
  • Adjustable dead-time control
  • Input undervoltage lockout with hysteresis

Applications

  • Switching power supplies (SMPS)
  • DC-DC converters
  • Solar inverters and charge controllers
  • Battery chargers
  • Motor speed controllers
Product Introduction: SG3525AP013TR Product Introduction

The STMicroelectronics SG3525AP013TR is a classic voltage-mode pulse width modulator IC designed for all types of switching power supplies. It integrates a 5.1 V reference trimmed to ±1%, an error amplifier with common-mode range including the reference voltage, an oscillator with sync input, a PWM comparator with latch, soft-start circuitry, and dual totem-pole output drivers. The P013TR variant is the SO-16 surface-mount package on tape and reel. Adjustable dead-time control via a single resistor between CT and discharge pins, combined with undervoltage lockout with 500 mV hysteresis, makes it a robust choice for push-pull, half-bridge, and full-bridge converter topologies.

Working Principle: SG3525AP013TR Working Principle

The SG3525A operates by comparing an error amplifier output with an oscillator ramp signal to generate PWM pulses. The oscillator generates a sawtooth waveform with frequency set by external RT and CT components (100 Hz to 400 kHz). The error amplifier compares a fraction of the output voltage with the 5.1 V reference, producing a control voltage. A PWM comparator compares this control voltage with the oscillator ramp; when the ramp exceeds the control voltage, the output pulse terminates. The PWM latch ensures only one pulse per oscillator cycle, preventing double pulsing. The dual totem-pole outputs alternate on each oscillator cycle for push-pull operation, with adjustable dead time set by the resistor between CT and discharge pins. The shutdown pin provides immediate pulse termination through the PWM latch.

Pin Description: SG3525AP013TR Pin Definition and Functions
Pin Name Description
1 INV INPUT Error Amplifier Inverting Input
2 NONINV INPUT Error Amplifier Non-Inverting Input
3 SYNC Oscillator Sync Input
4 OSC OUTPUT Oscillator Output
5 CT Oscillator Timing Capacitor
6 RT Oscillator Timing Resistor
7 DISCHARGE Dead-Time Adjust Resistor
8 SOFT-START Soft-Start Capacitor
9 COMP Error Amplifier Compensation
10 SHUTDOWN Shutdown Control Input
11 OUTPUT A Output Driver A
12 GROUND Power Ground
13 VC Output Stage Supply
14 OUTPUT B Output Driver B
15 VCC Supply Voltage (8-35 V)
16 VREF Reference Output (5.1 V)
Application Scenarios: In which products and applications is SG3525AP013TR used
  • SMPS Push-Pull Converters: Dual alternating outputs drive push-pull transformer primary with 49% max duty cycle and adjustable dead time
  • Solar Charge Controllers: PWM regulation of MPPT buck/boost stages with soft-start preventing inrush current damage
  • DC-DC Converters: Half-bridge and full-bridge converter control with undervoltage lockout for safe startup
  • Battery Chargers: Constant voltage/current regulation via error amplifier feedback with shutdown for overcharge protection
  • Motor Speed Control: Variable duty cycle PWM for DC motor drives with pulse-by-pulse current limiting
Alternative Models: What chips are recommended as replacements for SG3525AP013TR
Model Brand Topology Freq (kHz) Package
SG3525AN ST Push-Pull PWM 400 PDIP-16
TL494CN TI Push-Pull PWM 300 PDIP-16
UC3525AN Texas Instruments Push-Pull PWM 500 PDIP-16
KA3525A Fairchild Push-Pull PWM 400 SO-16
SG2525AP013TR ST Push-Pull PWM 400 SO-16

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1