Opens in a new tab

P6SMB16CA

600W bidirectional TVS diode, 16V VRWM, 26V clamp, SMB/DO-214AA

11200

Effective Inventory

Image for reference only

Manufacturer Part:

P6SMB16CA

Package:

SMB / DO-214AA (4.06 × 4.75 × 2.61 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The P6SMB16CA from Littelfuse is a 600 W bidirectional transient voltage suppression (TVS) diode in an SMB (DO-214AA) surface-mount package, designed to protect sensitive electronics from voltage transients. With a 16 V working voltage, 17.8 V minimum breakdown, and 26.0 V maximum clamping voltage at peak current, it provides robust ESD and surge protection for automotive and industrial circuits.

Key Specifications

Working Peak Reverse Voltage (VRWM) 16 V
Breakdown Voltage (VBR min/max) 17.8 V / 19.7 V
Clamping Voltage (VC @ IPP) 26.0 V @ 23.1 A
Peak Pulse Power (10/1000 µs) 600 W
Maximum Leakage Current (IR) 1 µA @ VRWM
ESD Rating IEC 61000-4-2, ±30 kV (air/contact)
Direction Bidirectional (CA suffix)
Operating Temperature -55°C to +150°C (TJ)
Package SMB / DO-214AA

Features

  • 600 W peak pulse power dissipation
  • Bidirectional protection for AC and reverse-polarity signals
  • Low clamping voltage for superior protection
  • IEC 61000-4-2 ESD protection up to ±30 kV
  • Fast response time (sub-nanosecond)
  • AEC-Q101 qualified for automotive use

Applications

  • Automotive ECU protection
  • Power supply transient suppression
  • Communication line ESD protection
  • Industrial control surge protection
  • LED lighting driver protection
Product Introduction: P6SMB16CA Product Introduction

The Littelfuse P6SMB16CA is a 600 W bidirectional transient voltage suppression diode designed to protect voltage-sensitive components from transient events including ESD, electrical fast transients (EFT), and lightning-induced surges. With a 16 V working voltage and 26.0 V maximum clamping voltage at 23.1 A peak pulse current, it provides robust protection for 12 V automotive systems and 15 V industrial circuits. The bidirectional (CA suffix) configuration clamps transients of both polarities, making it suitable for AC signal lines and applications where reverse voltage events may occur. The SMB (DO-214AA) package is AEC-Q101 qualified and offers sub-nanosecond response time with IEC 61000-4-2 ESD immunity up to ±30 kV.

Working Principle: P6SMB16CA Working Principle

The P6SMB16CA operates as a bidirectional avalanche diode TVS device. Under normal operating conditions, the diode presents a high impedance (leakage current <1 µA) at voltages below the working voltage (16 V). When a transient voltage exceeds the breakdown voltage (17.8-19.7 V), the device avalanches, creating a low-impedance path that diverts the transient current away from the protected circuit. The clamping voltage is limited to 26.0 V at the rated peak pulse current of 23.1 A, ensuring the protected circuit never sees damaging voltages. In bidirectional configuration, two avalanche diodes are connected in series opposing, providing symmetrical clamping for both positive and negative transients. After the transient subsides, the device returns to its high-impedance off-state automatically.

Pin Description: P6SMB16CA Pin Definition and Functions
Pin Name Description
1 Cathode/Anode Bidirectional Terminal 1
2 Anode/Cathode Bidirectional Terminal 2
Application Scenarios: In which products and applications is P6SMB16CA used
  • Automotive ECU Protection: 12 V battery line transient suppression for ISO 7637 pulse protection and load dump clamping in engine control modules
  • Power Supply Input: Front-end surge protection for AC-DC and DC-DC converters against lightning and switching transients
  • Communication Lines: Bidirectional ESD/surge protection for RS-485, CAN, and LIN bus transceivers with ±30 kV IEC 61000-4-2 rating
  • Industrial Control: IEC 61000-4-4 EFT protection for PLC analog input modules and sensor interfaces
  • LED Driver Protection: Output transient suppression in outdoor LED lighting drivers susceptible to lightning-induced surges
Alternative Models: What chips are recommended as replacements for P6SMB16CA
Model Brand VRWM (V) VC (V) Direction
P6SMB16A Littelfuse 16 26.0 Unidirectional
SMBJ16CA Littelfuse 16 26.0 Bidirectional
P6SMB15CA Littelfuse 15 24.4 Bidirectional
P6SMB18CA Littelfuse 18 29.2 Bidirectional
SMAJ16CA Littelfuse 16 26.0 Bidirectional

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1