Opens in a new tab

PCA9306DCTR

Dual bidirectional I2C level translator, 1.0-5.0V, auto-sense, VSSOP-8

8450

Effective Inventory

Image for reference only

Manufacturer Part:

PCA9306DCTR

Package:

VSSOP-8 (DCU) (2.3 × 2.0 × 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PCA9306DCTR from Texas Instruments is a dual bidirectional I2C bus and SMBus voltage-level translator in an 8-pin VSSOP (DCU) package. It enables seamless communication between devices operating at different voltage levels (1.0 V to 5.0 V on either side) without requiring a direction control signal, making it the simplest solution for mixed-voltage I2C system design.

Key Specifications

VREF1 Range 1.0 V to 5.0 V
VREF2 Range 1.8 V to 5.0 V
Data Rate Up to 400 kHz (I2C Fast-mode)
Channels 2 (SDA, SCL)
Direction Control None required (bidirectional auto-sensing)
Quiescent Current 3 µA typ
EN Input Active high, defaults to off when floating
Operating Temperature -40°C to +85°C
Package VSSOP-8 (DCU) (2.3 × 2.0 × 0.9 mm)

Features

  • True bidirectional voltage translation without direction pin
  • Open-drain I2C/SMBus compatible
  • 1.0 V to 5.0 V translation range
  • Ultra-low 3 µA quiescent current
  • EN pin for device enable/disable
  • Hot-insertion tolerant (Ioff circuitry)

Applications

  • I2C bus voltage bridging
  • SMBus level translation
  • Mixed-voltage MCU peripheral interfacing
  • Portable electronics power management
  • Sensor module communication bridging
Product Introduction: PCA9306DCTR Product Introduction

The Texas Instruments PCA9306DCTR is a dual bidirectional I2C bus and SMBus voltage-level translator that enables communication between I2C devices operating at different voltage levels without requiring a direction control signal. It translates between any voltage combination from 1.0 V to 5.0 V on side 1 and 1.8 V to 5.0 V on side 2, making it the simplest and most compact solution for mixed-voltage I2C system integration. The device uses open-drain pass-gate architecture that naturally supports the I2C bidirectional protocol, with 3 µA typical quiescent current ideal for battery-powered applications. An enable (EN) pin allows the translator to be disabled, isolating the two bus segments.

Working Principle: PCA9306DCTR Working Principle

The PCA9306 uses an open-drain pass-FET architecture specifically designed for I2C bidirectional translation. Each channel (SDA, SCL) contains a pass transistor that connects the two voltage domains. When a device on side 1 pulls the line low, the pass transistor conducts and the low level is reflected on side 2. When the line is released, passive pull-up resistors on each side restore the high level to their respective VREF voltages. VREF1 sets the logic high level for side 1, and VREF2 sets the logic high level for side 2. No direction control is needed because the I2C protocol is inherently open-drain and bidirectional. The EN pin controls the pass transistors; when EN is low, both channels are high-impedance, isolating the buses.

Pin Description: PCA9306DCTR Pin Definition and Functions
Pin Name Description
1 VREF1 Reference Voltage 1 (1.0-5.0 V)
2 SCL1 I2C Clock Side 1
3 SDA1 I2C Data Side 1
4 GND Ground
5 SDA2 I2C Data Side 2
6 SCL2 I2C Clock Side 2
7 VREF2 Reference Voltage 2 (1.8-5.0 V)
8 EN Enable Input (Active High)
Application Scenarios: In which products and applications is PCA9306DCTR used
  • I2C Voltage Bridging: Connect 1.8 V MCU I2C bus to 3.3 V or 5 V sensor peripherals without direction control complexity
  • SMBus Level Translation: Battery gauge IC communication between 3.3 V host and 5 V SMBus in server and laptop systems
  • Sensor Module Interfacing: Bridge voltage domain gap between low-power MCU and 5 V I2C environmental sensors
  • Portable Electronics: 3 µA quiescent current enables I2C bus bridging in always-on battery-powered subsystems
  • Hot-Insertion Systems: Ioff circuitry prevents backflow current during partial power-down in modular I2C backplanes
Alternative Models: What chips are recommended as replacements for PCA9306DCTR
Model Brand Channels Voltage Range Package
TXS0102DCTR TI 2 1.65-3.6/2.3-5.5 VSSOP-8
PCA9306DCUR TI 2 1.0-5.0/1.8-5.0 VSSOP-8
NCA9306DTR2G onsemi 2 1.0-5.0/1.8-5.0 TSOP-6
FXMA2102UMX Fairchild 2 1.65-3.6 MicroPak
SN74LVC1T45DCKR TI 1 1.65-5.5 SC-70

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1