Opens in a new tab

AMS1117

1A LDO voltage regulator, 1.1V dropout, fixed/adjustable outputs, SOT-223/TO-252

12476

Effective Inventory

Image for reference only

Manufacturer Part:

AMS1117

Package:

SOT-223 (6.5 x 3.5 x 1.6 mm), TO-252 (DPAK)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AMS1117 from Advanced Monolithic Systems is a low-dropout (LDO) linear voltage regulator available in fixed output voltages of 1.2V, 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, and 5.0V, as well as an adjustable version. Housed in SOT-223 and TO-252 packages, it delivers up to 1A output current with a typical dropout voltage of 1.1V at full load, making it one of the most widely used LDO regulators in consumer and embedded electronics.

Key Specifications

Output Current 1A (max)
Dropout Voltage 1.1V typ @ 1A
Output Voltages (Fixed) 1.2V, 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, 5.0V
Adjustable Reference 1.25V (1.2V-1.275V)
Line Regulation 0.2% max
Load Regulation 0.7% max
Ripple Rejection 60 dB min @ 120Hz
Current Limit 1.1A to 1.5A
Operating Temperature -20°C to +125°C
Package SOT-223, TO-252 (DPAK)

Features

  • Three-terminal adjustable or fixed voltage options
  • Low quiescent current flows into load for high efficiency
  • On-chip thermal limiting and current limit protection
  • Pin-compatible with industry-standard 1117 family
  • Optimized for low-voltage transient response
  • Available in SOT-223 and TO-252 power packages

Applications

  • 5V to 3.3V linear regulation for MCU/SoC boards
  • Battery chargers and portable equipment
  • Post regulators for switching power supplies
  • SCSI active terminators
  • Motherboard clock supply regulation
Product Introduction: AMS1117 Product Introduction

The AMS1117 from Advanced Monolithic Systems is a three-terminal low-dropout voltage regulator family providing up to 1A output current. Available in fixed voltages from 1.2V to 5.0V and an adjustable version with a 1.25V reference, the AMS1117 is one of the most ubiquitous LDO regulators in the electronics industry. Its dropout voltage is guaranteed at 1.3V maximum at full load, with typical values around 1.1V. Unlike PNP-type regulators that waste quiescent current, the AMS1117 directs quiescent current into the load, improving overall efficiency. On-chip thermal limiting and current limit protection ensure reliable operation under overload conditions.

Working Principle: AMS1117 Working Principle

The AMS1117 operates as a series-pass linear regulator using a PNP pass transistor to achieve low dropout voltage. The output voltage is maintained by a feedback loop comparing a fraction of the output (via an internal resistor divider for fixed versions or external resistors for the adjustable version) against a 1.25V bandgap reference. The error amplifier drives the pass transistor to regulate the output. The low dropout characteristic comes from the PNP transistor topology, which requires only a small VCE(sat) to maintain regulation. Thermal shutdown activates at approximately 155°C junction temperature, while foldback current limiting protects against output short circuits.

Pin Description: AMS1117 Pin Definition and Functions
Pin (SOT-223) Name Description
1 GND/ADJ Ground (fixed) or Adjust (variable)
2 VOUT Regulated Output Voltage (tab connected)
3 VIN Unregulated Input Voltage
Tab VOUT Heat sink tab, internally connected to Pin 2
Application Scenarios: In which products and applications is AMS1117 used
  • MCU/SoC Power: 5V to 3.3V regulation on Arduino, ESP8266, and ESP32 development boards with minimal external components
  • Battery-Powered Devices: Efficient regulation in portable instruments where low quiescent current and low dropout extend battery life
  • Post-SMPS Regulation: Secondary clean-up regulation after switching converters to reduce output ripple and noise
  • SCSI Termination: The 2.85V version specifically designed for active SCSI bus termination with tight output accuracy
  • Embedded Systems: General-purpose local regulation eliminating noise from distributed power rails
Alternative Models: What chips are recommended as replacements for AMS1117
Model Brand Iout (A) Vdo (V) Package
LM1117MPX-3.3 NXP 0.8 1.2 SOT-223
TLV1117LV33DCYR TI 1.0 1.1 SOT-223
AP2112K-3.3 Diodes Inc 0.6 0.4 SOT-23-5
RT9193-33GB Richtek 0.3 0.25 SOT-23-5
NCP1117ST33T3G onsemi 1.0 1.3 SOT-223

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1