Opens in a new tab

PCAL6416AHF

16-bit I2C GPIO expander with Agile I/O, dual-supply 1.65-5.5V, level shift, HWQFN-24

3824

Effective Inventory

Image for reference only

Manufacturer Part:

PCAL6416AHF

Package:

HWQFN-24 EP (4 x 4 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PCAL6416AHF from NXP Semiconductors is a 16-bit I2C/SMBus GPIO expander with Agile I/O features in a 24-pin HWQFN (4×4 mm) package. It provides remote I/O expansion via the I2C bus with dual-supply voltage ranging from 1.65V to 5.5V, enabling level translation between incompatible voltage domains. Enhanced features include programmable pull-up/pull-down resistors, output drive strength control, input latching, and maskable interrupts.

Key Specifications

I/O Channels 16 (2 ports x 8 bits)
Interface I2C/SMBus up to 400 kHz
Supply Voltage (VDD I2C) 1.65V to 5.5V
Supply Voltage (VDD P) 1.65V to 5.5V
Sink Current per Bit 25 mA max
Source Current per Bit 50 mA max
I2C Addresses 2 (hardware selectable via ADDR pin)
Interrupt Output Open-drain, maskable
Operating Temperature -40°C to +85°C
Package HWQFN-24 (4 x 4 x 0.75 mm)

Features

  • Agile I/O: programmable output drive strength, latchable inputs
  • Integrated pull-up and pull-down resistors per I/O
  • Built-in level translation between I2C bus and port sides
  • Maskable interrupt with input latch for reliable event capture
  • Programmable open-drain or push-pull output configuration
  • Pin-to-pin compatible with PCA6416A, powers up with interrupts masked

Applications

  • Smartphone and tablet I/O expansion
  • LED and button matrix control
  • Sensor interface aggregation
  • Industrial control I/O modules
  • Battery-powered portable device GPIO
Product Introduction: PCAL6416AHF Product Introduction

The NXP PCAL6416AHF is a 16-bit general-purpose I/O expander that provides remote I/O expansion for most microcontroller families via the I2C-bus interface. It features dual supply rails (VDD(I2C) and VDD(P)) ranging from 1.65V to 5.5V, enabling seamless level translation between the I2C bus side and the GPIO port side. As part of NXP’s Agile I/O family, it adds programmable output drive strength, latchable inputs, programmable pull-up/pull-down resistors, maskable interrupts, and programmable open-drain or push-pull outputs beyond the standard PCA6416A feature set. The device is pin-to-pin compatible with PCA6416A but powers up with all I/O interrupts masked to prevent spurious interrupts during board bring-up.

Working Principle: PCAL6416AHF Working Principle

The PCAL6416AHF communicates with the host microcontroller via the I2C/SMBus interface at up to 400 kHz. The dual-supply architecture separates VDD(I2C) which powers the interface side (SDA/SCL) from VDD(P) which powers the GPIO port and core logic, enabling voltage level translation between the two domains without external components. The 16 I/O pins are organized into two 8-bit ports (P0 and P1), each configurable as input or output via configuration registers. Input polarity inversion registers eliminate external logic gates. The Agile I/O features include programmable pull-up/pull-down resistors (eliminating discrete components), output drive strength selection, input latch mode that holds the state that triggered an interrupt until serviced, and interrupt masking per-channel to prevent unwanted interrupts.

Pin Description: PCAL6416AHF Pin Definition and Functions
Pin Name Description
1 VDDP Port Supply Voltage (1.65-5.5V)
2-9 P0_0 to P0_7 Port 0 I/O Pins
10 GND Ground
11-18 P1_0 to P1_7 Port 1 I/O Pins
19 INT Interrupt Output (Open-Drain)
20 ADDR I2C Address Select
21 RESET Active-Low Reset Input
22 SCL I2C Clock Input
23 SDA I2C Data (Open-Drain)
24 VDD(I2C) I2C Interface Supply (1.65-5.5V)
Application Scenarios: In which products and applications is PCAL6416AHF used
  • Mobile Device I/O: Expanding GPIO for buttons, LEDs, and sensors in smartphones/tablets with 1.8V I2C to 3.3V port level translation
  • Industrial I/O Modules: Remote I/O expansion in PLC systems with maskable interrupts for selective event monitoring
  • Sensor Aggregation: Consolidating multiple sensor inputs with built-in pull-up/pull-down resistors reducing BOM count
  • LED Matrix Control: 25 mA sink per bit directly drives LEDs without external driver transistors
  • Battery-Powered Devices: Low standby current with input latch ensures no missed events during sleep modes
Alternative Models: What chips are recommended as replacements for PCAL6416AHF
Model Brand I/O Agile I/O Package
PCA6416AHF NXP 16 No HWQFN-24
PCAL6524HE NXP 24 Yes HWQFN-28
TCA6416APWR TI 16 No TSSOP-24
SX1509I Silicon Labs 16 LED drv QFN-28
MAX7317ATG+ ADI 10 No TSSOP-24

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1