Opens in a new tab

L78L06ABZ

Fixed 6V 100mA positive linear regulator, TO-92, internal protection, +/-4% tolerance

5657

Effective Inventory

Image for reference only

Manufacturer Part:

L78L06ABZ

Package:

TO-92-3 (4.95 x 3.94 x 4.95 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The L78L06ABZ from STMicroelectronics is a three-terminal positive voltage regulator from the L78L series, providing a fixed 6V output at up to 100 mA in a through-hole TO-92 package. It features internal current limiting, thermal shutdown, and short-circuit protection, requiring no external components for operation. The A-grade version offers +/-4% output voltage tolerance over the -40°C to +125°C temperature range.

Key Specifications

Output Voltage 6V (fixed)
Output Current 100 mA max
Input Voltage Range 8V to 30V
Dropout Voltage 1.7V typ
Quiescent Current 5.5 mA typ, 6 mA max
Line Regulation 150 mV max
Load Regulation 60 mV max
PSRR 46 dB @ 120 Hz
Output Tolerance +/-4% (A grade)
Operating Temperature -40°C to +125°C
Package TO-92 (3-lead, through-hole)

Features

  • Internal thermal shutdown and current limiting
  • Short-circuit protection
  • No external components required
  • +/-4% output voltage tolerance (A grade)
  • Available in +/-4% (A) or +/-8% (C) selection
  • Direct replacement for Zener diode/resistor combinations

Applications

  • Local on-card voltage regulation
  • Sensor and transducer 6V supply
  • Automotive auxiliary power rails
  • Relay and solenoid driver supply
  • DIY and prototyping power circuits
Product Introduction: L78L06ABZ Product Introduction

The STMicroelectronics L78L06ABZ is a three-terminal positive voltage regulator from the L78L series providing a fixed 6V output at up to 100 mA in a compact TO-92 through-hole package. The device employs internal current limiting and thermal shutdown, making it essentially indestructible under normal operating conditions. It requires no external components for operation, offering a simpler and more reliable alternative to Zener diode/resistor combinations with lower quiescent current and lower output noise. The A grade designation ensures +/-4% output voltage tolerance over the full -40°C to +125°C operating temperature range.

Working Principle: L78L06ABZ Working Principle

The L78L06ABZ operates as a series-pass linear regulator using an internal NPN pass transistor controlled by a feedback loop. A resistive divider samples the output voltage and compares it against an internal bandgap reference. The error amplifier adjusts the pass transistor drive to maintain the output at the regulated 6V. The dropout voltage of 1.7V represents the minimum input-output differential required for regulation, meaning the input must be at least 7.7V to maintain a regulated 6V output. Internal current limiting protects the device from output short circuits by reducing the pass transistor drive when current exceeds approximately 100 mA. Thermal shutdown activates when the junction temperature exceeds the safe limit, disabling the output until the temperature drops below the hysteresis threshold.

Pin Description: L78L06ABZ Pin Definition and Functions
Pin Name Description
1 OUT Regulated 6V Output
2 GND Ground (Common)
3 IN Unregulated Input Voltage (8-30V)
Application Scenarios: In which products and applications is L78L06ABZ used
  • Local Regulation: On-card 6V supply for op-amps, comparators, and analog circuits near the load point eliminating distribution noise
  • Sensor Supply: Stable 6V reference supply for strain gauges and resistive transducers requiring tight voltage tolerance
  • Automotive Auxiliary: 12V to 6V regulation for relay coils, solenoid drivers, and instrument panel circuits in vehicle systems
  • Industrial Control: Simple 6V rail generation in PLC I/O modules with thermal shutdown for harsh environment reliability
  • Prototyping: Through-hole TO-92 package ideal for breadboard and hobbyist circuits requiring a reliable 6V source
Alternative Models: What chips are recommended as replacements for L78L06ABZ
Model Brand Vout (V) Iout (mA) Package
L78L05ABZ ST 5 100 TO-92
L78L08ABZ ST 8 100 TO-92
MC78L06ABP onsemi 6 100 TO-92
LM78L06ACZ TI 6 100 TO-92
KA78L06AZTA Richtek 6 100 TO-92

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1