Opens in a new tab

ADUM1200CRZ-RL7

Dual-ch iCoupler digital isolator, 25Mbps, 2500Vrms, 3ns PWD, 2.7-5.5V, SOIC-8

14135

Effective Inventory

Image for reference only

Manufacturer Part:

ADUM1200CRZ-RL7

Package:

8-lead narrow-body SOIC-N (5.0 x 5.3 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADUM1200CRZ-RL7 from Analog Devices is a dual-channel digital isolator based on iCoupler technology in an 8-lead narrow-body SOIC package. The CR grade supports data rates up to 25 Mbps with 3 ns max pulse width distortion and channel-to-channel matching of 3 ns. It provides 2500 Vrms isolation with >25 kV/us common-mode transient immunity and operates from 2.7V to 5.5V across the isolation barrier.

Key Specifications

Channels 2 (2/0 direction, both forward)
Data Rate (CR Grade) 25 Mbps
Isolation Voltage 2500 Vrms (UL 1577)
Propagation Delay 55 ns max @ 5V
Pulse Width Distortion 3 ns max
Channel Matching 3 ns max
CMTI >25 kV/us
Supply Voltage 2.7V to 5.5V (both sides)
Operating Temperature -40°C to +105°C (CR grade)
Package 8-lead narrow-body SOIC-N

Features

  • iCoupler technology eliminates optocoupler limitations
  • 25 Mbps data rate with 3 ns pulse width distortion
  • Bidirectional communication and 3V/5V level translation
  • DC correctness via patented refresh circuit
  • UL 1577, VDE, CSA, CQC safety certifications
  • 1/6 to 1/10 the power of optocouplers at equivalent rates

Applications

  • SPI interface isolation
  • RS-232/RS-485/RS-422 transceiver isolation
  • Motor drive and battery monitor isolation
  • Digital field bus isolation
  • Multi-channel isolation in size-critical designs
Product Introduction: ADUM1200CRZ-RL7 Product Introduction

The Analog Devices ADUM1200CRZ-RL7 is a dual-channel digital isolator using ADI’s patented iCoupler technology, which combines high-speed CMOS with monolithic transformer technology to deliver performance far exceeding traditional optocouplers. The CR grade supports data rates up to 25 Mbps with ultra-precise timing: 3 ns maximum pulse width distortion and 3 ns maximum channel-to-channel matching. The device provides 2500 Vrms isolation rated to UL 1577 with >25 kV/us common-mode transient immunity. Unlike optocouplers, the iCoupler approach eliminates concerns about current transfer ratio degradation, nonlinear transfer functions, and temperature/lifetime effects. The patented refresh circuit ensures DC correctness even when no input transitions are present, and during power-up/power-down conditions.

Working Principle: ADUM1200CRZ-RL7 Working Principle

The ADUM1200CRZ-RL7 operates using ADI’s iCoupler technology where digital input signals are encoded into RF pulses by an on-chip transmitter and coupled across a thin-film polyimide isolation barrier via embedded micro-transformers. The receiver side decodes the RF pulses back into the original digital logic levels. Each channel consists of an input conditioner, RF encoder, isolation transformer, RF decoder, and output buffer. The CR grade uses high-speed encoding achieving 25 Mbps throughput with minimized propagation delay (55 ns max) and pulse width distortion (3 ns max). The patented refresh circuit periodically transmits update pulses across the barrier even when the input is static, ensuring the output state remains correct in the absence of input transitions. The dual-supply architecture (VDD1 and VDD2) enables voltage level translation between the two isolation domains, supporting 3V to 5V bidirectional communication.

Pin Description: ADUM1200CRZ-RL7 Pin Definition and Functions
Pin Name Description
1 VDD1 Side 1 Supply (2.7-5.5V)
2 VIA Channel A Input (Side 1)
3 VIB Channel B Input (Side 1)
4 GND1 Side 1 Ground
5 GND2 Side 2 Ground
6 VOB Channel B Output (Side 2)
7 VOA Channel A Output (Side 2)
8 VDD2 Side 2 Supply (2.7-5.5V)
Application Scenarios: In which products and applications is ADUM1200CRZ-RL7 used
  • SPI Interface Isolation: Isolating SPI clock, data, and chip select lines between MCU and high-voltage ADC/DAC with 3 ns channel matching ensuring synchronous signal arrival
  • RS-485 Bus Isolation: Isolating transceiver digital signals in industrial networks with >25 kV/us CMTI preventing data corruption from motor switching transients
  • Motor Drive: Isolating gate driver control signals in inverter-based motor drives with 2500 Vrms rating meeting IEC 61800 safety requirements
  • Battery Monitor: Isolating cell measurement communication in BMS systems with bidirectional level translation between 3.3V MCU and 5V analog front-end
  • Medical Equipment: Patient isolation barrier in diagnostic equipment with UL 1577 and IEC 62368-1 certifications for safety compliance
Alternative Models: What chips are recommended as replacements for ADUM1200CRZ-RL7
Model Brand Channels Rate (Mbps) Viso (Vrms)
ADUM1200BRZ-RL7 ADI 2 10 2500
ADUM1201CRZ-RL7 ADI 2 (1/1) 25 2500
ISO7721DR TI 2 100 3000
Si8621BB-B-IS Silicon Labs 2 150 5000
ADuM1200WSRZ ADI 2 1 2500

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1