Opens in a new tab

KSZ8091MNXIA-TR

10/100 Ethernet PHY, MII, on-chip termination, EEE, WoL, LinkMD, 32-QFN 5x5mm

3951

Effective Inventory

Image for reference only

Manufacturer Part:

KSZ8091MNXIA-TR

Package:

QFN-32 EP (5 x 5 x 0.85 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The KSZ8091MNXIA-TR from Microchip is a single-chip 10BASE-T/100BASE-TX IEEE 802.3-compliant Ethernet physical-layer transceiver (PHY) with MII interface in a 32-pin QFN (5×5 mm) package. It features on-chip termination resistors, an integrated 1.2V core regulator, Energy Efficient Ethernet (EEE), Wake-on-LAN (WoL), and LinkMD TDR-based cable diagnostics, operating from a single 3.3V supply with flexible 1.8/2.5/3.3V digital I/O.

Key Specifications

Data Rate 10/100 Mbps
Interface MII (MNX variant)
Supply Voltage 3.3V (single supply)
Digital I/O Voltage 1.8V / 2.5V / 3.3V
On-Chip Termination Yes (differential pairs)
Internal Regulator 1.2V core (built-in)
EEE Support Yes (IEEE 802.3az)
Wake-on-LAN Yes (magic packet, link change, custom packet)
Cable Diagnostics LinkMD TDR-based
Auto MDI/MDI-X Yes (HP Auto)
Management Interface MDC/MDIO (Clause 22)
Operating Temperature -40°C to +85°C
Package 32-pin QFN-EP (5 x 5 x 0.85 mm)

Features

  • Single-chip 10/100 Ethernet PHY with IEEE 802.3 compliance
  • On-chip termination resistors reduce BOM cost and simplify layout
  • Integrated 1.2V regulator eliminates external LDO for core supply
  • Energy Efficient Ethernet (EEE) for reduced power during idle periods
  • Wake-on-LAN with magic packet, link status change, or custom packet detection
  • LinkMD TDR cable diagnostics identify faulty copper cabling
  • HP Auto MDI/MDI-X for automatic crossover detection and correction
  • Programmable interrupt output and LED indicators

Applications

  • IP phones and VoIP endpoints
  • IP set-top boxes and smart TVs
  • Game consoles and printers
  • Industrial Ethernet nodes
  • Embedded systems with 10/100 Ethernet connectivity
Product Introduction: KSZ8091MNXIA-TR Product Introduction

The Microchip KSZ8091MNXIA-TR is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 UTP cable. As a highly integrated PHY solution, it reduces board cost and simplifies layout by integrating on-chip termination resistors for differential pairs, a low-noise 1.2V core regulator, and flexible 1.8/2.5/3.3V digital I/O voltage support. The MNX variant provides the Media Independent Interface (MII) for direct connection to MII-compliant Ethernet MAC processors and switches. Energy Efficient Ethernet (EEE) reduces power during idle traffic, while Wake-on-LAN enables system wakeup from standby mode. LinkMD TDR-based cable diagnostics and parametric NAND tree support facilitate system bring-up and production testing.

Working Principle: KSZ8091MNXIA-TR Working Principle

The KSZ8091MNXIA-TR operates as an Ethernet PHY layer transceiver that encodes and decodes data between the MAC-side MII interface and the line-side differential TX/RX pairs connected to the RJ-45 magnetics. On the transmit path, 4-bit nibble data from the MAC via MII is encoded using 4B/5B coding (100BASE-TX) or Manchester encoding (10BASE-T), scrambled, and driven onto the differential TXP/TXN pair through an internal line driver with on-chip 50-ohm termination. On the receive path, the differential signal from the cable is equalized, decoded, and presented as 4-bit nibble data on the MII RXD[3:0] bus synchronized to RXC. Auto-negotiation selects the highest common speed and duplex mode. The integrated 1.2V regulator powers the digital core from the 3.3V supply, eliminating an external LDO. The MDC/MDIO management interface provides register-level access for configuration, status monitoring, and cable diagnostics via the LinkMD TDR function.

Pin Description: KSZ8091MNXIA-TR Pin Definition and Functions
Pin Name Description
1 VDD 3.3V Analog Supply
2 RXP Receive Positive (differential pair)
3 RXN Receive Negative (differential pair)
4 VDD 3.3V Analog Supply
5-7 PHYAD[2:0] PHY Address strapping pins
8 MDC Management Data Clock
9 MDIO Management Data I/O
10 VDDIO Digital I/O Supply (1.8/2.5/3.3V)
11-14 RXD[3:0] MII Receive Data
15 RXDV MII Receive Data Valid
16 RXER MII Receive Error
17 RXC MII Receive Clock (2.5/25 MHz)
18 CONFIG2 Configuration strapping (MII mode select)
19 INT/PME_N2 Interrupt / PME output
20 TXP Transmit Positive (differential pair)
21 TXN Transmit Negative (differential pair)
22 TXC/PME_EN MII Transmit Clock / PME enable strap
23 TXEN MII Transmit Enable
24-27 TXD[3:0] MII Transmit Data
28-29 COL/CRS MII Collision/Carrier Sense + config straps
30 LED0/NWAYEN LED output / Auto-Negotiation enable strap
31 TXER MII Transmit Error / EEE LPI control
32 RST# Chip Reset (active low)
Application Scenarios: In which products and applications is KSZ8091MNXIA-TR used
  • IP Phone / VoIP: Single-port 10/100 PHY with WoL for always-on VoIP endpoints and EEE reducing power during idle call periods
  • Industrial Ethernet: LinkMD cable diagnostics for field installation verification in factory automation and process control nodes
  • Smart TV / Set-Top Box: Integrated termination and regulator minimize BOM in cost-sensitive consumer entertainment devices
  • Embedded System: Flexible 1.8-3.3V VDDIO allows direct MII connection to low-voltage FPGAs and SoCs without level shifters
  • Printer / MFP: 10/100 Ethernet connectivity with Auto MDI/MDI-X for plug-and-play network cable connection
Alternative Models: What chips are recommended as replacements for KSZ8091MNXIA-TR
Model Brand Speed Interface Package
KSZ8081MNXIA-TR Microchip 10/100 MII/RMII QFN-32
RTL8201F-VB-CG Realtek 10/100 MII/RMII QFN-32
DP83848JVVB TI 10/100 MII/RMII LQFP-48
LAN8720A Microchip 10/100 RMII QFN-24
KSZ9031RNXIA Microchip 10/100/1000 RGMII QFN-48

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1