Opens in a new tab

LT8365EMSE#PBF

60V 2A boost/SEPIC/inverting DC-DC, 2.8-60Vin, 1.5MHz, spread spectrum, MSOP-16

12603

Effective Inventory

Image for reference only

Manufacturer Part:

LT8365EMSE#PBF

Package:

MSOP-16 (5 x 4 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LT8365EMSE#PBF from Analog Devices is a high-voltage, high-efficiency boost/inverting/SEPIC DC-DC converter with a 60V/2A switch in a 16-lead MSOP package. It operates from a 2.8V to 60V input range, features a 1.5 MHz switching frequency, and supports boost, SEPIC, and inverting topologies, making it ideal for automotive, industrial, and telecom power supply designs.

Key Specifications

Topology Boost / SEPIC / Inverting
Input Voltage Range 2.8V to 60V
Switch Voltage/Current 60V / 2A (integrated)
Switching Frequency 300 kHz to 1.5 MHz (adjustable)
Synchronization External clock sync (optional)
Quiescent Current 9 µA (shutdown: 1 µA)
Efficiency Up to 93%
Spread Spectrum Yes (for EMI reduction)
Operating Temperature -40°C to +125°C (E-grade)
Package MSOP-16 (5 x 4 mm)

Features

  • 60V, 2A integrated power switch
  • Wide 2.8V to 60V input voltage range
  • Programmable switching frequency up to 1.5 MHz
  • Spread spectrum modulation for EMI reduction
  • Burst Mode operation for high efficiency at light loads
  • Programmable soft-start with tracking
  • Power good output and precision EN threshold

Applications

  • Automotive 12V/24V/48V power supplies
  • Industrial 4-20 mA loop-powered systems
  • Telecom -48V bus converters
  • SEPIC battery-powered converters
  • LED driver and bias supplies
Product Introduction: LT8365EMSE#PBF Product Introduction

The Analog Devices LT8365EMSE#PBF is a high-voltage monolithic boost/inverting/SEPIC DC-DC converter with an integrated 60V/2A power switch in a compact MSOP-16 package. Operating from a 2.8V to 60V input range, it supports multiple topologies including boost (up to 60V output), SEPIC (output above or below input), and inverting (negative output voltage). The 1.5 MHz maximum switching frequency minimizes inductor and capacitor size. Spread spectrum frequency modulation reduces EMI peaks, simplifying compliance with automotive and industrial EMC standards. Burst Mode operation maintains high efficiency at light loads with only 9 µA quiescent current, critical for battery-powered and always-on applications.

Working Principle: LT8365EMSE#PBF Working Principle

The LT8365EMSE operates as a current-mode DC-DC converter controller with an integrated 60V NPN power switch. In boost mode, the switch connects the inductor to ground during on-time, storing energy, then releases it to the output through an external Schottky diode during off-time. The current-mode control loop senses switch current for cycle-by-cycle current limiting and provides inherent input voltage feedforward for improved line transient response. In SEPIC mode, a coupling capacitor transfers energy between the input and output sides of the inductor, allowing the output to be above, below, or equal to the input voltage. In inverting mode, the output is referenced to ground with negative polarity. The spread spectrum modulation varies the switching frequency by ±20% around the center frequency, spreading EMI energy across a wider bandwidth and reducing peak emissions. Burst Mode operation skips switching cycles at light load, reducing switching losses while maintaining output regulation.

Pin Description: LT8365EMSE#PBF Pin Definition and Functions
Pin Name Description
1 SW Switch Pin (inductor connection)
2 SW Switch Pin (inductor connection)
3 EN/UVLO Enable / Undervoltage Lockout Input
4 VC Error Amplifier Compensation Output
5 FB Feedback Voltage Input (1.0V reference)
6 RT/SYNC Frequency Set Resistor / External Sync Input
7 SS Soft-Start Capacitor Input
8 PGOOD Power Good Open-Drain Output
9 BST Bootstrap Capacitor Connection
10 INTVCC Internal 2.6V Regulator Bypass
11 GND Ground
12-13 GND Ground (thermal)
14 SHDN Shutdown Input (active low)
15 VIN Input Supply (2.8-60V)
16 VIN Input Supply (2.8-60V)
Application Scenarios: In which products and applications is LT8365EMSE#PBF used
  • Automotive 48V Bus: 48V to 12V SEPIC converter maintaining output during cold-crank (down to 2.8V) and load-dump (up to 60V) transients
  • 4-20mA Loop Power: 24V loop-powered SEPIC generating isolated 5V/3.3V rails with 9 µA quiescent current for transmitter electronics
  • Telecom -48V: Inverting topology generating +12V or +5V from -48V telecom bus with spread spectrum for NEBS EMI compliance
  • Industrial Sensor: Wide input 12-48V to 5V boost converter powering industrial sensors with Burst Mode efficiency at light load
  • LED Driver: Constant current boost topology for high-brightness LED strings from automotive 12V battery with analog dimming via VC pin
Alternative Models: What chips are recommended as replacements for LT8365EMSE#PBF
Model Brand Vin (V) Isw (A) Package
LT8362EMSE ADI 2.8-60 2 MSOP-16
LT8361EMSE ADI 2.8-60 1.5 MSOP-16
LM5175RHFR TI 3.5-55 5 (ext) VQFN-28
TPS55340RTE TI 2.7-38 5.25 QFN-16
LTC3789EUH ADI 4-38 10 (ext) QFN-32

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1