Opens in a new tab

MCP23008-E/SO

8-bit I2C GPIO expander, 3 addr pins, 1.8-5.5V, 25mA I/O, int, SOIC-18, 125°C

3681

Effective Inventory

Image for reference only

Manufacturer Part:

MCP23008-E/SO

Package:

SOIC-18 (7.5 x 11.6 x 2.35 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP23008-E/SO from Microchip is an 8-bit I2C I/O expander with three hardware address pins in an 18-lead SOIC package. Operating from 1.8V to 5.5V over the -40°C to +125°C extended temperature range, it provides 8 bidirectional I/O pins with configurable interrupts, polarity inversion, and 25 mA sink/source per pin.

Key Specifications

I/O Channels 8-bit (GP0-GP7)
Interface I2C (100 kHz / 400 kHz / 1.7 MHz)
Hardware Address Pins 3 (up to 8 devices on one bus)
I/O Current 25 mA sink/source per pin
Supply Voltage 1.8V to 5.5V
Standby Current 1 µA max
Interrupt Output Configurable (active-high/low/open-drain)
Operating Temperature -40°C to +125°C (E-grade)
Package SOIC-18 (7.5 x 11.6 mm)

Features

  • 8-bit remote bidirectional I/O port, default to input
  • High-speed I2C: 100 kHz, 400 kHz, 1.7 MHz modes
  • 3 address pins for up to 8 devices on one I2C bus
  • Configurable interrupt output (active-high, active-low, or open-drain)
  • Interrupt-on-change from defaults or pin change
  • Polarity inversion register for input polarity control
  • External reset input and internal power-on reset

Applications

  • LED and button matrix expansion
  • Industrial I/O modules
  • Keypad and display interfaces
  • Home automation and IoT I/O expansion
  • Embedded system GPIO extension
Product Introduction: MCP23008-E/SO Product Introduction

The Microchip MCP23008-E/SO is an 8-bit general-purpose I/O expander that provides remote I/O expansion for most microcontroller families via the I2C serial interface. Three hardware address pins allow up to eight MCP23008 devices to share a single I2C bus, providing up to 64 additional I/O pins. Each of the eight GPIO pins is individually configurable as input or output with 25 mA sink/source capability. The device supports I2C clock rates up to 1.7 MHz for high-speed data transfer. The configurable interrupt output can signal input changes on either a pin-change basis or when inputs differ from a programmed default value, with the interrupt capture register preserving the pin state at the moment of interrupt. The E-grade temperature range extends to +125°C for industrial and automotive applications.

Working Principle: MCP23008-E/SO Working Principle

The MCP23008-E/SO communicates with the host microcontroller via the I2C interface using a 7-bit slave address composed of a fixed prefix (0b0100) plus the three hardware address pins (A2, A1, A0), giving addresses from 0x20 to 0x27. Internal registers control I/O direction (IODIR), output state (GPIO), input polarity (IPOL), and interrupt behavior (GPINTEN, INTCON, DEFVAL). When any input pin changes state from its corresponding DEFVAL register value (or simply changes, depending on INTCON configuration), the INT output is asserted. The INTCAP register captures the GPIO port state at the moment of the interrupt, ensuring no input changes are missed. The OLAT register provides output latch control independent of the GPIO read register. The SEQOP bit enables sequential register access mode, allowing multiple registers to be read or written in a single I2C transaction for improved throughput.

Pin Description: MCP23008-E/SO Pin Definition and Functions
Pin Name Description
1 SCL I2C Serial Clock Input
2 SDA I2C Serial Data I/O
3 A2 Hardware Address Input 2
4 A1 Hardware Address Input 1
5 A0 Hardware Address Input 0
6 RESET External Reset Input (active low)
7 NC No Connect
8 INT Interrupt Output (configurable)
9 VSS Ground
10-17 GP0-GP7 Bidirectional I/O Pins
18 VDD Positive Supply (1.8-5.5V)
Application Scenarios: In which products and applications is MCP23008-E/SO used
  • Keypad Matrix: 8 additional GPIO for 4×4 keypad scanning with interrupt-on-change triggering key press detection without polling
  • LED Expansion: 8-bit output port driving indicator LEDs with 25 mA per pin directly, no external driver transistors needed
  • Industrial I/O Module: Extending PLC I/O over I2C bus with up to 8 devices (64 I/O) sharing a single 2-wire interface
  • Home Automation: Adding relay and sensor I/O to a single MCU I2C port with 125°C operation for HVAC and lighting control
  • Embedded GPIO: 1.7 MHz I2C for fast I/O update rates in real-time control applications with 1 µA standby extending battery life
Alternative Models: What chips are recommended as replacements for MCP23008-E/SO
Model Brand I/O Bits Interface Package
MCP23S08-E/SO Microchip 8 SPI (10 MHz) SOIC-18
PCAL6416AHF NXP 16 I2C HWQFN-24
TCA6408APWR TI 8 I2C TSSOP-16
MAX7317ATG+ ADI 10 SPI TSSOP-24
SX1509IBIIT Silicon Labs 16 I2C QFN-28

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1