Opens in a new tab

LM35DT/NOPB

Precision analog temp sensor, 10mV/°C, -55 to +150°C, ±0.5°C, TO-220-3

12182

Effective Inventory

Image for reference only

Manufacturer Part:

LM35DT/NOPB

Package:

TO-220-3 (14.99 x 10.16 x 4.45 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM35DT/NOPB from Texas Instruments is a precision integrated-circuit temperature sensor with a linear 10 mV/°C output scale factor in a TO-220-3 through-hole package. It operates from 4V to 30V supply without external calibration, provides accuracy of ±0.5°C at 25°C, and measures temperature from -55°C to +150°C, making it ideal for direct temperature sensing in thermal management and environmental monitoring.

Key Specifications

Output Type Analog voltage (10 mV/°C)
Temperature Range -55°C to +150°C
Accuracy at 25°C ±0.5°C (typ), ±1.0°C (max)
Linearity ±0.15°C typ
Supply Voltage 4V to 30V
Supply Current 60 µA typ (self-heating <0.1°C)
Output Impedance 0.1 Ohm typ
Calibration Not required (factory trimmed)
Operating Temperature -55°C to +150°C
Package TO-220-3 (tab to GND)

Features

  • Linear 10 mV/°C output directly calibrated in Celsius
  • No external calibration or trimming required
  • ±0.5°C accuracy at 25°C
  • Low 60 µA supply current minimizes self-heating
  • Wide 4V to 30V supply range
  • Low output impedance for direct ADC drive
  • TO-220 package allows heat sink mounting

Applications

  • Thermal management and overtemperature protection
  • HVAC and environmental monitoring
  • Battery temperature monitoring
  • Power supply thermal shutdown
  • Industrial process temperature measurement
Product Introduction: LM35DT/NOPB Product Introduction

The Texas Instruments LM35DT/NOPB is a precision integrated-circuit temperature sensor that produces an output voltage linearly proportional to the Celsius temperature with a scale factor of 10 mV/°C. Unlike thermistors or RTDs that require external signal conditioning, the LM35 provides a direct voltage output readable by any ADC without calibration or trimming. At 25°C, it achieves ±0.5°C typical accuracy, and the linear output eliminates lookup tables or polynomial calculations. The TO-220 package allows heat sink attachment for measuring surface or ambient temperature, and the 60 µA supply current ensures self-heating is below 0.1°C in still air. The DT suffix indicates the TO-220 package rated for the full -55°C to +150°C range.

Working Principle: LM35DT/NOPB Working Principle

The LM35DT/NOPB uses a bandgap-based temperature sensing circuit where the difference in base-emitter voltage (VBE) between two bipolar transistors operating at different current densities is proportional to absolute temperature (PTAT). This PTAT voltage is amplified and offset so that 0°C corresponds to 0V output, with a precisely trimmed gain of 10 mV/°C. The internal reference and trimming are performed at the factory using laser trimming of thin-film resistors, ensuring ±0.5°C accuracy at 25°C without any user calibration. The low 60 µA supply current minimizes Joule heating (P = V x I = 5V x 60µA = 0.3 mW), keeping self-heating errors below 0.1°C in still air. The low output impedance (0.1 Ohm) allows direct connection to ADC inputs without buffer amplifiers. For negative temperature measurement, a pull-down resistor to a negative supply enables the output to go below ground.

Pin Description: LM35DT/NOPB Pin Definition and Functions
Pin Name Description
1 VOUT Analog Output Voltage (10 mV/°C)
2 VCC Supply Voltage (4-30V)
3 GND Ground / Common
Application Scenarios: In which products and applications is LM35DT/NOPB used
  • Thermal Shutdown: Direct analog output to MCU ADC for overtemperature protection in power supplies, motor drives, and amplifier heatsinks
  • HVAC Monitoring: Room temperature measurement with ±0.5°C accuracy feeding thermostat control algorithms without calibration
  • Battery Temperature: Monitoring Li-Ion battery pack temperature during charging with 10 mV/°C output compatible with fuel gauge ADC inputs
  • Industrial Process: Wide -55°C to +150°C range for process temperature monitoring in food processing, chemical, and manufacturing applications
  • Heat Sink Monitoring: TO-220 package mounted directly on heat sink for real-time thermal monitoring with low self-heating error
Alternative Models: What chips are recommended as replacements for LM35DT/NOPB
Model Brand Output Range (°C) Package
LM35DZ/NOPB TI 10mV/°C 0 to 100 TO-92
LM34DZ/NOPB TI 10mV/°F -50 to 300°F TO-92
TMP36GT9Z ADI 10mV/°C -40 to 125 TO-92
MCP9700T-E/TT Microchip 10mV/°C -40 to 125 SOT-23
LMT85DCKR TI 8.2mV/°C -50 to 150 SC70-5

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1