Opens in a new tab

LM2675MX-5.0

1A 5.0V step-down regulator, 6.5-40Vin, 260kHz, 96% eff, SOIC-8, SIMPLE SWITCHER

9603

Effective Inventory

Image for reference only

Manufacturer Part:

LM2675MX-5.0

Package:

SOIC-8 (4.9 x 6.0 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM2675MX-5.0 from Texas Instruments is a 1A step-down voltage regulator in a SOIC-8 package providing a fixed 5.0V output from an input up to 40V. Based on a DMM (Die Mounted MOSFET) topology, it operates at 260 kHz switching frequency, requires minimal external components (inductor, diode, capacitors), and achieves up to 96% efficiency.

Key Specifications

Output Voltage 5.0V (fixed)
Input Voltage Range 6.5V to 40V
Maximum Output Current 1A
Switching Frequency 260 kHz (fixed)
Efficiency Up to 96%
Quiescent Current 2.5 mA typ (operating)
Standby Current 50 µA (shutdown mode)
Line Regulation 0.02%/V typ
Load Regulation 0.1% typ
Operating Temperature -40°C to +125°C
Package SOIC-8 (4.9 x 6.0 mm)

Features

  • Fixed 5.0V output with 1A current capability
  • Wide 6.5V to 40V input voltage range
  • 260 kHz fixed switching frequency
  • Only 4 external components required
  • Internal 1A DMOS power switch
  • Thermal shutdown and current limit protection
  • SOIC-8 surface-mount package

Applications

  • 12V/24V to 5V step-down converters
  • Industrial distributed power systems
  • Automotive accessory power
  • Battery-powered equipment
  • Embedded 5V logic supply
Product Introduction: LM2675MX-5.0 Product Introduction

The Texas Instruments LM2675MX-5.0 is a member of the SIMPLE SWITCHER family, providing a complete 1A step-down voltage regulator solution in a SOIC-8 package. It converts input voltages from 6.5V to 40V to a precise 5.0V output using a fixed 260 kHz switching frequency and an integrated DMOS power switch. The design requires only four external components: input capacitor, output capacitor, bootstrap capacitor, and inductor, significantly simplifying the BOM and PCB layout compared to controllers requiring external MOSFETs and compensation networks. The device achieves up to 96% efficiency through the low RDS(ON) of the integrated DMOS switch and optimized current-mode control. Internal protection includes cycle-by-cycle current limiting and thermal shutdown with automatic recovery.

Working Principle: LM2675MX-5.0 Working Principle

The LM2675MX-5.0 uses a current-mode PWM buck converter topology with an integrated N-channel DMOS power switch. During the switch on-time, the DMOS transistor connects the input voltage (VIN) to the inductor through the SW pin, causing inductor current to ramp up linearly. During the off-time, the DMOS switch turns off and the inductor current freewheels through an external Schottky catch diode to ground, causing the inductor current to ramp down. The current-mode control loop senses the switch current through an internal sense resistor and compares it to an error amplifier output that represents the difference between the output voltage and the 5.0V internal reference. The 260 kHz fixed switching frequency sets the inductor and capacitor values, and the current-mode architecture provides inherent input voltage feedforward for good line transient response. The bootstrap capacitor (CBOOT) between the CBOOT and SW pins provides gate drive voltage above VIN for the high-side DMOS switch. Current limiting is achieved by clamping the peak switch current on a cycle-by-cycle basis, while thermal shutdown disables switching when the junction temperature exceeds approximately 180°C.

Pin Description: LM2675MX-5.0 Pin Definition and Functions
Pin Name Description
1 CB Bootstrap Capacitor (connect to SW via 0.01µF cap)
2 GND Ground
3 ON/OFF Shutdown Control (high=on, low=off, float=on)
4 FB Feedback Input (connect to output for fixed 5.0V)
5 VIN Input Supply Voltage (6.5-40V)
6 VIN Input Supply Voltage (6.5-40V)
7 SW Switch Output (connect to inductor and diode)
8 SW Switch Output (connect to inductor and diode)
Application Scenarios: In which products and applications is LM2675MX-5.0 used
  • 12V to 5V Conversion: Standard automotive 12V battery to 5V logic supply with 1A load capability for head units, ECUs, and accessory modules
  • 24V Industrial: 24V industrial bus to 5V sensor and MCU supply with up to 40V input surviving transient overvoltage events
  • Battery Equipment: 4-cell Li-Ion (9-16.8V) to 5V regulation for portable test equipment and handheld instruments
  • Embedded 5V Rail: Minimum external component count (4 components) for space-constrained PCB designs needing a reliable 5V supply
  • Distributed Power: 24V or 48V to 5V point-of-load conversion in telecom and data communication racks with 96% peak efficiency
Alternative Models: What chips are recommended as replacements for LM2675MX-5.0
Model Brand Vout Iout (A) Vin (V)
LM2675MX-3.3 TI 3.3V 1 6.5-40
LM2676MX-5.0 TI 5.0V 3 6.5-40
LM2596SX-5.0 TI 5.0V 3 4.5-40
TS2596CM-5 TOREX 5.0V 3 4.5-40
AP1501A-K5G-13 BCD 5.0V 3 4.5-40

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1