Opens in a new tab

STM32F427VGT6

Cortex-M4 180MHz, 1MB dual-bank Flash, 256KB SRAM, Chrom-ART, LCD-TFT, LQFP-100

12251

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F427VGT6

Package:

LQFP-100 (14 x 14 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F427VGT6 from STMicroelectronics is a high-performance ARM Cortex-M4 MCU with FPU running at 180 MHz, featuring 1 MB dual-bank Flash, 256 KB SRAM, Chrom-ART Accelerator, and LCD-TFT controller in a 100-pin LQFP (14×14 mm) package. With 225 DMIPS, DSP instructions, and rich connectivity including Ethernet MAC, USB OTG, and camera interface, it targets advanced graphics, motor control, and industrial applications.

Key Specifications

Core ARM Cortex-M4 with FPU, 180 MHz
Performance 225 DMIPS / 1.25 DMIPS/MHz
Flash Memory 1 MB (dual-bank, concurrent R/W)
SRAM 256 KB (incl. 64 KB CCM) + 4 KB backup
ADC 3x 12-bit, 2.4 MSPS (7.2 MSPS triple interleave)
DAC 2x 12-bit
Timers 17 total (12x 16-bit, 2x 32-bit, motor PWM)
Communication 4x USART, 4x UART, 6x SPI, 3x I2C, 2x CAN
USB 2.0 OTG HS/FS with dedicated DMA
Ethernet 10/100 MAC with IEEE 1588v2
Supply Voltage 1.7V to 3.6V
Operating Temperature -40°C to +85°C
Package LQFP-100 (14 x 14 x 1.4 mm)

Features

  • 180 MHz Cortex-M4 with hardware FPU and DSP instructions
  • 1 MB dual-bank Flash supporting concurrent read and write
  • Chrom-ART Accelerator (DMA2D) for 2D graphics acceleration
  • LCD-TFT controller up to 4096×2048 resolution
  • ART Accelerator for zero-wait-state Flash execution
  • 10/100 Ethernet MAC with IEEE 1588v2 precision timestamping
  • USB 2.0 OTG high-speed with ULPI interface

Applications

  • High-performance graphical user interfaces
  • Industrial control and motor drive
  • Medical diagnostic equipment
  • Consumer electronics with display
  • Networking and communication gateways
Product Introduction: STM32F427VGT6 Product Introduction

The STMicroelectronics STM32F427VGT6 is a high-performance ARM Cortex-M4 microcontroller running at 180 MHz with 225 DMIPS and a hardware floating-point unit (FPU). It features 1 MB dual-bank Flash memory that supports concurrent read and write operations, enabling firmware updates without halting application execution. The 256 KB SRAM includes a 64 KB Core Coupled Memory (CCM) data RAM for time-critical data, and 4 KB backup SRAM is retained in VBAT mode. The Chrom-ART Accelerator (DMA2D) offloads 2D graphics operations such as blitting, alpha blending, and color format conversion from the CPU, enabling rich graphical user interfaces without CPU overhead. The integrated LCD-TFT controller supports display resolutions up to 4096×2048 with a dedicated pixel clock. The ART Accelerator allows zero-wait-state execution from Flash at 180 MHz through a 128-bit instruction prefetch cache and branch cache.

Working Principle: STM32F427VGT6 Working Principle

The STM32F427VGT6 is based on the ARM Cortex-M4F processor core running at 180 MHz with a hardware single-precision floating-point unit (FPU) that executes FP instructions in a single cycle. The ART Accelerator overcomes the Flash access latency by implementing a 128-bit wide instruction prefetch buffer with a 64-entry branch cache, achieving zero-wait-state execution at full 180 MHz speed. The dual-bank Flash architecture splits the 1 MB into two independent 512 KB banks, allowing the CPU to read from one bank while the other is being programmed or erased (concurrent R/W). The Chrom-ART Accelerator (DMA2D) is a dedicated 2D graphics DMA engine that performs memory-to-memory pixel transfers with optional pixel format conversion, alpha blending, and color keying in hardware, freeing the CPU from graphics rendering tasks. The LCD-TFT controller generates display timing signals (HSYNC, VSYNC, pixel clock) and fetches pixel data from a framebuffer in SRAM or external memory via the FSMC. The 10/100 Ethernet MAC with IEEE 1588v2 precision time protocol (PTP) provides hardware timestamping for synchronized clocks in industrial Ethernet applications. Three 12-bit ADCs can operate in triple interleaved mode for 7.2 MSPS aggregate sampling rate for high-speed signal acquisition.

Pin Description: STM32F427VGT6 Pin Definition and Functions
Pin Name Description
1-8 PE0-PE7 Port E I/O (FSMC, timer, ADC)
9-16 PE8-PE15 Port E I/O (FSMC, timer, LCD)
17-24 PB0-PB7 Port B I/O (ADC, I2C, SPI, TIM)
25-32 PB8-PB15 Port B I/O (I2C, SPI, TIM, CAN)
33-40 VDD/VSS Power supply / Ground pairs
41-48 PA0-PA7 Port A I/O (ADC, UART, TIM, ETH, USB)
49-56 PA8-PA15 Port A I/O (TIM, SPI, UART, I2S)
57-64 PD0-PD7 Port D I/O (FSMC, UART, SPI)
65-72 PD8-PD15 Port D I/O (FSMC, UART, LCD)
73-80 PC0-PC7 Port C I/O (ADC, SPI, I2S, SDIO)
81-88 PC8-PC15 Port C I/O (SDIO, SPI, I2S, USB)
89-96 VDD/VSS, VBAT Power, Ground, Battery Backup
97-100 NRST, BOOT0, OSC Reset, Boot Mode, Oscillator
Application Scenarios: In which products and applications is STM32F427VGT6 used
  • Graphical HMI: Chrom-ART DMA2D rendering UI elements with alpha blending at 60 fps on WVGA LCD while CPU handles touch input and application logic
  • Industrial Motor Drive: 3x ADC interleaved sampling motor current at 7.2 MSPS with 32-bit timers for FOC PWM generation and CAN bus for fieldbus communication
  • Medical Equipment: Dual-bank Flash enabling OTA firmware updates while ultrasound or patient monitoring continues running on the active bank
  • Network Gateway: Ethernet MAC with IEEE 1588v2 PTP for industrial Ethernet protocol conversion between CAN sensors and 10/100 Ethernet backbone
  • USB Audio: USB OTG HS with I2S audio class 2.0 supporting 192kHz/24-bit streaming with DMA and DSP filtering on the FPU
Alternative Models: What chips are recommended as replacements for STM32F427VGT6
Model Brand Core Flash Package
STM32F429VGT6 ST M4 180MHz 1MB+Chrom-ART LQFP-100
STM32F427ZGT6 ST M4 180MHz 1MB LQFP-144
STM32H743VI ST M7 480MHz 2MB LQFP-100
LPC4357FET256 NXP M4/M0 204MHz 1MB TFBGA-256
SAM4E16E Microchip M4 120MHz 1MB LQFP-144

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1