Opens in a new tab

NFM21PC474R1C3D

Murata 0.47uF three-terminal MLCC, 16V, 2A, 0805, EMI filter, AEC-Q200

6687

Effective Inventory

Image for reference only

Manufacturer Part:

NFM21PC474R1C3D

Package:

0805 (2.0mm x 1.25mm x 0.85mm, 2012 metric)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NFM21PC474R1C3D from Murata is a 0.47uF three-terminal feed-through MLCC capacitor in a 0805 (2012 metric) package, designed for power line EMI filtering. Its three-terminal structure provides significantly lower equivalent series inductance (ESL) compared to conventional two-terminal MLCCs, delivering superior high-frequency noise suppression in automotive and industrial power supply lines.

Key Specifications

Type Three-terminal feed-through capacitor
Capacitance 0.47uF (474 code)
Rated Voltage 16V DC
Rated Current 2A DC
DC Resistance (max) 30m ohm
Package Size 0805 (2.0mm x 1.25mm x 0.85mm)
Operating Temperature -55C ~ +125C
Packaging 180mm Reel, 4000 pcs/reel

Features

  • Three-terminal structure provides ultra-low ESL for superior high-frequency filtering
  • 0.47uF capacitance in compact 0805 footprint
  • 30m ohm max DC resistance for minimal voltage drop
  • 2A rated current suitable for moderate power rails
  • AEC-Q200 compliant for automotive applications

Applications

  • Automotive ECU power line noise filtering
  • Industrial equipment EMI suppression
  • Consumer electronics power supply decoupling
  • Mobile device power rail filtering
  • DC-DC converter output noise suppression
Product Introduction: NFM21PC474R1C3D Product Introduction

The NFM21PC474R1C3D from Murata is a three-terminal feed-through multilayer ceramic capacitor designed specifically for EMI filtering on power supply lines. Unlike conventional two-terminal MLCCs, the three-terminal structure routes the signal current through the capacitor body while grounding the noise, resulting in dramatically lower equivalent series inductance (ESL) and superior high-frequency noise attenuation. With 0.47uF of capacitance in a compact 0805 footprint, the NFM21PC474R1C3D provides effective filtering from the kHz range well into the GHz range. The device is rated for 16V DC and 2A DC, with a maximum DC resistance of 30m ohm to minimize voltage drop on the power line. The component meets AEC-Q200 automotive qualification standards, ensuring reliability in harsh automotive environments with operating temperatures from -55C to +125C.

Working Principle: NFM21PC474R1C3D Working Principle

The NFM21PC474R1C3D operates as a feed-through filter capacitor. In the three-terminal configuration, the signal line enters at Terminal 1 (input), passes through the capacitor body, and exits at Terminal 3 (output), while Terminal 2 connects the capacitor electrodes to ground. This structure forces the high-frequency noise current to flow through the low-impedance path to ground via the capacitor, while the DC and low-frequency signal current passes through the series path with only 30m ohm of DC resistance. The key advantage over two-terminal capacitors is that the parasitic inductance of the signal path is not in series with the capacitor, but rather the capacitor is between the signal line and ground. This means the self-resonant frequency is much higher, and effective filtering extends to much higher frequencies, typically providing 20dB or more insertion loss at 100MHz and above.

Pin Description: NFM21PC474R1C3D Pin Definition and Functions
Terminal Name Function
1 IN Signal Line Input
2 GND Ground Terminal
3 OUT Signal Line Output
Application Scenarios: In which products and applications is NFM21PC474R1C3D used
  • Automotive ECU: Filter switching noise from DC-DC converters and motor drivers on ECU power rails with AEC-Q200 reliability
  • Industrial equipment: Suppress EMI from VFDs, servo drives, and PLC outputs to meet IEC EMC standards
  • Consumer electronics: Clean USB, HDMI, and other high-speed interface power rails without signal degradation
  • Mobile devices: Filter RF coupling into power management ICs in smartphones and tablets
  • DC-DC converter output: Attenuate switching ripple and harmonics above the self-resonant frequency of conventional MLCCs
Alternative Models: What chips are recommended as replacements for NFM21PC474R1C3D
Model Brand Capacitance Voltage Package
NFM21PC474R1E3D Murata 0.47uF 25V 0805
NFM21PC105R1C3D Murata 1uF 16V 0805
NFM3DCC472R1H3D Murata 4.7nF 50V 1206
EMI217JM701TBA2 TDK 0.47uF 10V 0805
EMI2127MTAG TDK 0.1uF 10V 0402

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1