Opens in a new tab

EQY-3-63+

Mini-Circuits MMIC gain equalizer, DC~6GHz, 3.2dB slope, GaAs IPD, MCLP-8 2x2mm

13443

Effective Inventory

Image for reference only

Manufacturer Part:

EQY-3-63+

Package:

MCLP-8 (2mm x 2mm, 0.5mm pitch)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EQY-3-63+ from Mini-Circuits is a MMIC gain equalizer with a 3.2dB negative slope across DC to 6GHz. Built on GaAs IPD MMIC technology, this absorptive equalizer compensates for the positive gain slope of amplifiers and receivers, delivering a flatter overall frequency response in RF signal chains.

Key Specifications

Type Absorptive gain equalizer (GaAs IPD MMIC)
Frequency Range DC ~ 6GHz
Nominal Slope 3.2dB
Insertion Loss 3.78dB @ 10MHz, 0.58dB @ 6GHz (typical)
VSWR 1.04:1 @ 10MHz, 1.29:1 @ 6GHz
RF Input Power +31dBm max
Operating Temperature -40C ~ +85C
ESD Rating HBM Class 2 (2000V)
Package MCLP-8 (2mm x 2mm)

Features

  • 3.2dB negative slope compensates amplifier gain roll-off
  • Absorptive design matches both directions with low VSWR
  • Ultra-wideband DC to 6GHz operation
  • Miniature 2mm x 2mm MCLP-8 package
  • +31dBm high power handling for transmitter applications

Applications

  • Amplifier gain flattening in cellular and WiFi bands
  • Receiver front-end gain slope compensation
  • Transmitter linearization pre-distortion
  • Radar and electronic warfare signal chains
  • Test equipment frequency response equalization
Product Introduction: EQY-3-63+ Product Introduction

The EQY-3-63+ from Mini-Circuits is a MMIC gain equalizer designed to compensate for the positive gain slope (higher gain at low frequencies, lower gain at high frequencies) common in RF amplifiers and receiver chains. The device provides a 3.2dB negative slope across its DC to 6GHz operating range, with insertion loss varying from 3.78dB at 10MHz down to 0.58dB at 6GHz. This inverse slope characteristic, when placed in series with an amplifier that has a positive gain slope, produces a flatter overall frequency response. The absorptive design ensures low VSWR (better than 1.3:1) across the entire frequency range in both forward and reverse directions. Built on GaAs IPD (Integrated Passive Device) MMIC technology, the EQY-3-63+ achieves this precise frequency response in an extremely compact 2mm x 2mm MCLP-8 package, making it easy to insert into existing RF signal chains with minimal board impact.

Working Principle: EQY-3-63+ Working Principle

The EQY-3-63+ uses a passive LC network implemented in GaAs IPD MMIC technology to create a frequency-dependent attenuation profile. At low frequencies (near DC), the network presents maximum attenuation (3.78dB), and as frequency increases, the attenuation decreases progressively, reaching only 0.58dB at 6GHz. This negative slope response is the mathematical inverse of the typical positive gain slope seen in broadband amplifiers, where gain decreases with frequency. When the equalizer is placed in series with the amplifier, the total frequency response becomes the sum (in dB) of the amplifier gain and the equalizer attenuation, resulting in a much flatter net gain versus frequency. The absorptive topology uses resistive elements to absorb rather than reflect the unwanted signal energy, ensuring that the VSWR remains low in both directions regardless of the frequency.

Pin Description: EQY-3-63+ Pin Definition and Functions
Pad Name Function
1 GND Ground
2 RF-IN RF Input
3 NC External Ground (optional)
4 GND Ground
5 NC External Ground (optional)
6 NC External Ground (optional)
7 RF-OUT RF Output
8 GND Ground
Paddle GND Ground (bottom thermal pad)
Application Scenarios: In which products and applications is EQY-3-63+ used
  • Amplifier gain flattening: Insert before or after a broadband LNA to compensate for gain roll-off and achieve flat gain across cellular/WiFi bands
  • Receiver chain equalization: Equalize the cumulative gain slope of cascaded LNAs, mixers, and IF amplifiers in multi-stage receivers
  • Transmitter linearization: Pre-distort the transmit signal path to compensate for power amplifier gain compression at band edges
  • Radar systems: Flatten the frequency response of wideband radar receiver chains for accurate range and Doppler measurements
  • Test equipment: Equalize signal generator or spectrum analyzer front-end response for accurate amplitude measurements
Alternative Models: What chips are recommended as replacements for EQY-3-63+
Model Brand Slope Freq Range Package
EQY-6-63+ Mini-Circuits 6dB DC~6GHz MCLP-8
EQY-10-63+ Mini-Circuits 11.2dB DC~6GHz MCLP-8
EQY-2-45+ Mini-Circuits 2dB DC~4.5GHz MCLP-8
BFG-10+ Mini-Circuits 10dB DC~6GHz connector
EQY-20-63+ Mini-Circuits 20dB DC~6GHz MCLP-8

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1