Opens in a new tab

SG3525ANG

PWM controller IC, 8-35V, 100Hz-400kHz oscillator, dual 400mA totem-pole outputs, PDIP-16

9847

Effective Inventory

Image for reference only

Manufacturer Part:

SG3525ANG

Package:

PDIP-16 (300 mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi SG3525ANG is a pulse width modulator (PWM) control circuit designed for switching power supply applications. Housed in a PDIP-16 package, it features a built-in soft-start circuit, under-voltage lockout, adjustable dead-time control, and dual totem-pole output stages capable of sourcing and sinking over 200 mA, making it suitable for push-pull, half-bridge, and full-bridge converter topologies.

Key Specifications

Supply Voltage 8 V to 35 V
Reference Voltage 5.1 V ±1%
Oscillator Frequency 100 Hz to 400 kHz
Output Peak Current 400 mA (source/sink)
Max Duty Cycle 49%
Package PDIP-16

Features

  • 5.1 V ±1% trimmed voltage reference
  • Oscillator frequency range: 100 Hz to 400 kHz
  • Separate oscillator sync pin for master-slave operation
  • Adjustable dead-time control
  • Built-in soft-start with external capacitor
  • Pulse-by-pulse current limiting via shutdown pin
  • Dual totem-pole output stages (400 mA peak)

Applications

  • Switch-mode power supplies (SMPS)
  • DC-DC converters (push-pull, half/full-bridge)
  • Battery chargers and inverters
  • Motor drive control circuits
  • Uninterruptible power supplies (UPS)
Product Introduction: SG3525ANG Product Introduction

The SG3525ANG from onsemi is a versatile pulse width modulator control circuit optimized for all types of switching power supplies. It integrates a precision 5.1 V voltage reference, an oscillator with sync capability, an error amplifier, a PWM comparator with latch, soft-start circuitry, and dual totem-pole output drivers. The device operates from 8 V to 35 V and supports switching frequencies from 100 Hz to 400 kHz. The shutdown pin provides both pulse-by-pulse current limiting and full shutdown with soft-start recycling, offering comprehensive protection features in a single IC.

Working Principle: SG3525ANG Working Principle

The SG3525ANG operates as a voltage-mode PWM controller. An internal oscillator generates a sawtooth waveform determined by external RT and CT components. The error amplifier compares a sample of the output voltage with the 5.1 V reference and produces a control voltage. The PWM comparator compares this control voltage against the oscillator ramp to set the pulse width. A flip-flop alternately enables the two output stages at half the oscillator frequency, producing complementary drive signals for push-pull operation. The shutdown pin (pin 10) immediately sets the PWM latch for fastest turn-off, while simultaneously discharging the soft-start capacitor. A sustained shutdown command fully discharges the soft-start capacitor, enabling a graceful restart upon release.

Pin Description: SG3525ANG Pin Definition and Functions
Pin Name Type Function
1 INV INPUT Analog Input Error amplifier inverting input
2 NON-INV INPUT Analog Input Error amplifier non-inverting input
3 SYNC Digital I/O Oscillator synchronization
4 OSC OUTPUT Analog Output Oscillator output
5 CT Analog Timing capacitor connection
6 RT Analog Timing resistor connection
7 DISCHARGE Analog CT discharge (dead-time adjust)
8 SOFT-START Analog Soft-start capacitor connection
9 COMPENSATION Analog Error amplifier output / compensation
10 SHUTDOWN Digital Input Shutdown control (active high)
11 OUTPUT A Power Output Output driver A
12 GROUND Power Signal ground
13 VC Power Output stage supply
14 OUTPUT B Power Output Output driver B
15 VCC Power Chip supply voltage
16 VREF Analog Output 5.1V reference output
Application Scenarios: In which products and applications is SG3525ANG used
  • Push-pull and half-bridge DC-DC converters
  • Offline switching power supplies
  • Solar inverter control circuits
  • Battery charger PWM regulation
  • Induction heater power control
Alternative Models: What chips are recommended as replacements for SG3525ANG
Manufacturer Part Number Package Notes
TI UC3525AN PDIP-16 Pin-compatible equivalent
onsemi SG3525ADW SOIC-16 Same function, SMD package
TI UC3825 PDIP-16 Current-mode alternative
onsemi MC34025P PDIP-16 Current-mode, similar application

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1