Opens in a new tab

PIC16F1513-I/SO

8-bit MCU, 7KB Flash, 256B RAM, 20MHz, 10-bit 17ch ADC, EUSART/SPI/I2C, SOIC-28

6148

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F1513-I/SO

Package:

SOIC-28 (7.5 x 10.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Microchip PIC16F1513-I/SO is an 8-bit enhanced mid-range Flash microcontroller with 7 KB program memory and 256 bytes of RAM, packaged in a 28-pin SOIC. Operating from 2.3 V to 5.5 V, it integrates a 10-bit ADC with 17 channels, two CCP modules, EUSART, SPI, and I2C interfaces, targeting cost-sensitive embedded control applications.

Key Specifications

Core PIC16 Enhanced Mid-range
Program Memory 7 KB Flash
RAM 256 bytes
Operating Speed 20 MHz
Supply Voltage 2.3 V to 5.5 V
ADC 10-bit, 17 channels
Package SOIC-28 (7.5 x 10.3 mm)

Features

  • Enhanced mid-range core with 49 instructions and 16-level stack
  • 7 KB Flash with self-read/write capability
  • 10-bit ADC with 17 channels and CVD for capacitive touch
  • EUSART with auto-baud detection
  • Master SPI and I2C (MI2C) interfaces
  • Two CCP (Capture/Compare/PWM) modules
  • 25 mA source/sink per I/O pin

Applications

  • Appliance control panels
  • Capacitive touch sensing interfaces
  • Motor control in small appliances
  • Industrial sensor nodes
  • Automotive body electronics
Product Introduction: PIC16F1513-I/SO Product Introduction

The PIC16F1513-I/SO from Microchip Technology is an 8-bit Flash microcontroller based on the enhanced mid-range PIC16 core, offering 49 instructions and 16-level hardware stack. With 7 KB of Flash program memory and 256 bytes of RAM, it provides sufficient resources for embedded control applications. The device integrates a 10-bit ADC with 17 channels featuring Hardware Capacitive Voltage Divider (CVD) for touch sensing, two CCP modules for PWM generation, and standard communication interfaces including EUSART with auto-baud, Master SPI, and I2C. The wide operating voltage range of 2.3 V to 5.5 V enables use in both 3.3 V and 5 V systems.

Working Principle: PIC16F1513-I/SO Working Principle

The PIC16F1513-I/SO operates on Microchip’s enhanced mid-range architecture with a 14-bit instruction word. The CPU fetches instructions from Flash memory and executes them in a single cycle (200 ns at 20 MHz), with program branching taking two cycles. The 16-level hardware stack supports nested subroutine calls and interrupt handling. The ADC uses a successive approximation register (SAR) architecture with a 10-bit resolution, performing conversions in approximately 26 µs. The CVD module enables capacitive touch sensing by performing double sample conversions with inverted acquisition phases. The EUSART module supports synchronous and asynchronous serial communication with automatic baud rate detection. The CCP modules provide capture, compare, and 10-bit PWM functionality for timer-based control and motor drive applications.

Pin Description: PIC16F1513-I/SO Pin Definition and Functions
Pin Name Type Function
1 MCLR/VPP Input Master clear reset / programming voltage
2 RA0/AN0 I/O Port A bit 0 / ADC channel 0
3 RA1/AN1 I/O Port A bit 1 / ADC channel 1
4 RA2/AN2/VREF I/O Port A bit 2 / ADC channel 2 / voltage reference
5 RA3/AN3 I/O Port A bit 3 / ADC channel 3
8 RA6/OSC2 I/O Port A bit 6 / oscillator output
9 RA7/OSC1 I/O Port A bit 7 / oscillator input
10 VSS Power Ground
11 RB4/AN10/SDA I/O Port B bit 4 / I2C data
14 RB7/PGD I/O Port B bit 7 / ICSP data
15 RB6/PGC I/O Port B bit 6 / ICSP clock
17 RC0/T1OSO I/O Port C bit 0 / Timer1 oscillator output
19 RC2/CCP1 I/O Port C bit 2 / CCP module 1
20 RC3/SCL I/O Port C bit 3 / I2C clock
22 RC5/SDO I/O Port C bit 5 / SPI data out
23 RC6/TX/CK I/O Port C bit 6 / EUSART transmit
24 RC7/RX/DT I/O Port C bit 7 / EUSART receive
20 VDD Power Positive supply
Application Scenarios: In which products and applications is PIC16F1513-I/SO used
  • White goods appliance control with capacitive touch buttons
  • Small motor speed control using CCP PWM output
  • Remote sensor node with EUSART and I2C interfaces
  • Automotive body controller (AEC-Q100 qualified)
  • Industrial I/O expander with analog sensing
Alternative Models: What chips are recommended as replacements for PIC16F1513-I/SO
Manufacturer Part Number Flash RAM Notes
Microchip PIC16F1512-I/SO 3.5 KB 128 B Smaller memory variant
Microchip PIC16F1516-I/SO 14 KB 512 B Larger memory variant
ST STM8S003F3P6 8 KB 1 KB Alternative 8-bit MCU
Microchip ATtiny814 8 KB 512 B Modern AVR alternative

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1