Opens in a new tab

ISO3088DWR

20-Mbps half-duplex 2.5-kVrms isolated RS-485/RS-422 transceiver with 12-kV HBM ESD protection

8742

Effective Inventory

Image for reference only

Manufacturer Part:

ISO3088DWR

Package:

SOIC-16 (DW) (10.3 x 7.5 x 2.65 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO3088DWR is a Texas Instruments 20-Mbps, half-duplex, 2.5-kVrms isolated RS-485 and RS-422 transceiver. It features integrated galvanic isolation between the bus-side transceiver and the logic-side interface, rated at 2500 V RMS per UL 1577 and 4000 V PK basic insulation per DIN EN IEC 60747-17. The device is available in a 16-pin SOIC (DW) package and operates over a temperature range of -40°C to +85°C.

Key Specifications

Data Rate 20 Mbps
Duplex Half-Duplex
Isolation Voltage 2500 V RMS (UL 1577)
Transient Isolation Voltage 4000 V PK
ESD Protection (HBM) 12 kV (bus to GND2)
CMTI 25 kV/µs (min)
Unit Load 1/8 (up to 256 nodes)
Supply Voltage VCC1 3.15 V to 5.5 V
Supply Voltage VCC2 4.5 V to 5.5 V

Features

  • Meets or exceeds TIA/EIA RS-485 requirements
  • Signaling rates up to 20 Mbps
  • 1/8 unit load – up to 256 nodes on a bus
  • Thermal shutdown protection
  • Low bus capacitance – 16 pF (typical)
  • 50 kV/µs typical transient immunity
  • Fail-safe receiver for bus open, short, idle
  • 3.3-V inputs are 5-V tolerant
  • Bus-pin ESD protection: 12-kV HBM

Applications

  • Security systems
  • Factory automation
  • Motor and motion control
  • HVAC and building automation networks
  • Chemical production
  • Networked security stations
Product Introduction: ISO3088DWR Product Introduction

The ISO3088DWR is a Texas Instruments isolated half-duplex RS-485 and RS-422 transceiver capable of data rates up to 20 Mbps. It integrates galvanic isolation rated at 2500 V RMS per UL 1577, breaking the ground loop to allow a much larger common-mode voltage range for long transmission lines. The device features 1/8 unit load enabling up to 256 nodes on a single bus, fail-safe receiver operation, thermal shutdown protection, and 12-kV HBM ESD protection between bus pins and GND2. It is qualified for use from -40°C to +85°C in an SOIC-16 package.

Working Principle: ISO3088DWR Working Principle

The ISO3088DWR operates as an isolated half-duplex transceiver with two subsystems: (1) The logic-side interface, powered by VCC1 (3.15-5.5V), handles driver input (DI), receiver output (RO), and direction control (DE/RE). (2) The bus-side transceiver, powered by VCC2 (4.5-5.5V), drives the differential bus lines A and B. The galvanic isolation barrier between the two sides is implemented using capacitive coupling technology, providing 2500 V RMS isolation and 25 kV/µs minimum common-mode transient immunity. The driver converts single-ended logic signals into differential outputs on the bus, while the receiver converts differential bus signals back to single-ended logic levels. Fail-safe logic ensures the receiver output is high when the bus is open, shorted, or idle.

Pin Description: ISO3088DWR Pin Definition and Functions
Pin Mnemonic Description
1 VCC1 Logic-side supply voltage (3.15-5.5 V)
2 RO Receiver output
3 DE Driver output enable (active high)
4 DI Driver data input
5 GND1 Logic-side ground
6 GND2 Bus-side ground
7 A Bus-side non-inverting input/output
8 B Bus-side inverting input/output
9 Z Bus-side inverting driver output
10 Y Bus-side non-inverting driver output
11-16 VCC2/NC Bus-side supply and no-connect pins
Application Scenarios: In which products and applications is ISO3088DWR used
  • Isolated RS-485 networks in factory automation with 256-node bus capability
  • Security and access control systems requiring galvanic isolation
  • Motor drive and motion control with high noise immunity (12 kV ESD)
  • HVAC building automation with long transmission lines
  • Chemical and industrial process control with ground loop isolation
Alternative Models: What chips are recommended as replacements for ISO3088DWR
Model Manufacturer Key Difference
ISO3086DWR TI Full-duplex version
ISO3082DWR TI Half-duplex, lower data rate options
ISO15DWR TI 1 Mbps isolated transceiver
ADM2587EBRWZ ADI Similar isolated RS-485, integrated power
ISO35DWR TI 35 Mbps isolated transceiver

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1