Opens in a new tab

MSP430F5419AIPZR

16-bit ultra-low-power MCU, 25 MHz, 128KB Flash, 16KB SRAM, 12-bit ADC, 4x USCI, 100-pin LQFP

12560

Effective Inventory

Image for reference only

Manufacturer Part:

MSP430F5419AIPZR

Package:

100-Pin LQFP (14 x 14 x 1.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MSP430F5419AIPZR is a Texas Instruments 16-bit ultra-low-power mixed-signal microcontroller based on the MSP430 RISC architecture. It features 128 KB Flash, 16 KB SRAM, a 12-bit ADC with 14 external channels, up to 4 USCI modules (UART/SPI/I2C), 3 16-bit timers, hardware multiplier, DMA, and RTC. Operating at up to 25 MHz with supply voltage from 1.8 V to 3.6 V, it is packaged in a 100-pin LQFP and rated for -40°C to +85°C.

Key Specifications

CPU 16-bit MSP430 RISC
Clock Frequency Up to 25 MHz
Flash Memory 128 KB
RAM 16 KB
ADC 12-bit SAR, 14 external channels
Communication 4x USCI (UART/SPI/I2C)
Supply Voltage 1.8 V to 3.6 V
GPIO 87 I/O pins
Package 100-Pin LQFP

Features

  • Ultra-low power: 1.7 µA standby (LPM3)
  • 25 MHz maximum system clock
  • 128 KB Flash, 16 KB SRAM
  • 12-bit ADC with autoscan feature
  • 4 USCI modules: UART, SPI, I2C
  • Hardware multiplier (32-bit)
  • 3-channel DMA controller
  • RTC with alarm capabilities
  • Integrated LDO with programmable core voltage
  • 3.5 µs wakeup from standby

Applications

  • Analog and digital sensor systems
  • Digital motor control
  • Portable measurement instruments
  • Thermostats and smart meters
  • Handheld consumer electronics
Product Introduction: MSP430F5419AIPZR Product Introduction

The MSP430F5419AIPZR is a Texas Instruments 16-bit ultra-low-power mixed-signal microcontroller featuring 128 KB Flash, 16 KB SRAM, and a powerful 12-bit ADC with 14 external channels and autoscan capability. It includes up to four USCI modules supporting UART, SPI, and I2C, three 16-bit timers, a hardware multiplier supporting 32-bit operations, a 3-channel DMA controller, and an RTC with alarm capabilities. The device operates from 1.8 V to 3.6 V at up to 25 MHz, with ultra-low standby current of 1.7 µA in LPM3 and 3.5 µs wakeup time. An integrated LDO with programmable core voltage optimizes power efficiency across operating modes.

Working Principle: MSP430F5419AIPZR Working Principle

The MSP430F5419A operates with multiple subsystems: (1) The 16-bit RISC CPU executes instructions efficiently with 16-bit registers and constant generators. The digitally controlled oscillator (DCO) allows 3.5 µs wakeup from low-power modes. (2) The unified clock system provides FLL-stabilized MCLK, SMCLK, and ACLK from internal VLO, REFO, or external crystals up to 32 MHz. (3) The power management system includes an integrated LDO with programmable core voltage, supply voltage supervision, and brownout protection. (4) The 12-bit ADC uses a SAR architecture with internal reference, sample-and-hold, and autoscan for autonomous multi-channel conversion. (5) Four USCI modules provide flexible serial communication (UART/IrDA/SPI/I2C). Multiple low-power modes (LPM0-LPM4.5) minimize current consumption for battery-powered applications.

Pin Description: MSP430F5419AIPZR Pin Definition and Functions

100-pin LQFP with 87 configurable GPIO pins. Key pin groups include: P1-P4 (with interrupt capability), P5-P11 (general purpose I/O), JTAG/SBW debug interface (TST, RST), supply pins (VCC, DVCC, AVCC), ground pins (VSS, DVSS, AVSS), ADC analog inputs (A0-A13), crystal oscillator pins (XT1IN/OUT, XT2IN/OUT), and USCI module pins for UART/SPI/I2C communication. Refer to the datasheet pin diagram for complete pin mapping.

Application Scenarios: In which products and applications is MSP430F5419AIPZR used
  • Portable medical and industrial measurement instruments with 12-bit ADC and ultra-low power
  • Digital motor control with hardware multiplier and PWM timer outputs
  • Smart meters and thermostats with RTC and multiple communication interfaces
  • Sensor fusion systems with 14-channel ADC, DMA, and 4x USCI for data aggregation
  • Handheld consumer electronics requiring months of battery life from LPM3 standby
Alternative Models: What chips are recommended as replacements for MSP430F5419AIPZR
Model Manufacturer Key Difference
MSP430F5438AIPZR TI 256KB Flash, 16KB SRAM
MSP430F5436AIPZR TI 192KB Flash version
MSP430F5418AIPZR TI Reduced feature version
MSP430F5529 TI USB-enabled version with 128KB Flash
STM32L152RET6 ST ARM Cortex-M3 ultra-low-power alternative

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1