Opens in a new tab

AT24CM01-SHD-B

1Mbit I2C Serial EEPROM, 1MHz, 2.5-5.5V, Industrial, 8-SOIC

5000

Effective Inventory

Image for reference only

Manufacturer Part:

AT24CM01-SHD-B

Package:

8-SOIC (5.30 x 5.30 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AT24CM01-SHD-B is a Microchip 1-Mbit (128 Kbyte) I2C serial EEPROM organized as 128K x 8. It operates from 1.7 V to 5.5 V with clock frequencies up to 1 MHz, and features 256-byte page write, hardware write-protect pin, 1 million erase/write cycle endurance, and 100-year data retention. The SHD-B suffix indicates the 8-lead SOIC (N) package rated for -40°C to +85°C.

Key Specifications

Density 1 Mbit (128 KB)
Organization 128K x 8
Supply Voltage 1.7 V to 5.5 V
Max Clock Frequency 1 MHz
Page Size 256 bytes
Endurance 1,000,000 cycles

Features

  • 1 Mbit density in compact 8-lead SOIC
  • 1.7 V to 5.5 V operating range
  • Up to 1 MHz clock (I2C fast-mode plus)
  • 256-byte page write mode
  • Hardware write-protect pin (WP)
  • 1 million erase/write cycle endurance
  • 100-year data retention
  • Self-timed write cycle (5 ms max)

Applications

  • Consumer electronics configuration storage
  • Industrial parameter and calibration storage
  • Network MAC address storage
  • Embedded system boot configuration
Product Introduction: AT24CM01-SHD-B Product Introduction

The Microchip AT24CM01-SHD-B is a 1Mbit (128K x 8) I2C serial EEPROM optimized for reliable nonvolatile storage in consumer and industrial applications. The device supports both 400 kHz and 1 MHz I2C clock rates, enabling fast data access in time-critical systems. The 256-byte page size and self-timed write cycle (5 ms max) allow efficient bulk data updates, while the hardware write-protect pin prevents accidental data corruption. With an endurance of 1,000,000 erase/write cycles and data retention exceeding 40 years, the AT24CM01 provides long-term data integrity for critical configuration storage, calibration tables, and event logging. The cascadable 3-bit address bus supports up to four devices on a single I2C bus, expanding total storage to 4 Mbit without additional address decoding logic. The wide 2.5V to 5.5V supply range supports both 3.3V and 5V system designs, and the 6 uA standby current minimizes battery drain in always-on applications.

Working Principle: AT24CM01-SHD-B Working Principle

The AT24CM01 uses a standard I2C (2-wire) serial interface consisting of SDA (data) and SCL (clock) lines. Communication follows the I2C protocol: the master initiates a start condition, sends the 7-bit device address (1010+A2+A1+A0) followed by a read/write bit, then the 17-bit word address (two bytes for the 128K address space). For write operations, up to 256 bytes can be loaded into the page buffer and written simultaneously during the self-timed 5 ms write cycle. For read operations, the current address read, random read, and sequential read modes are supported. The hardware write-protect (WP) pin, when tied to VCC, blocks write operations to the entire array, protecting critical data from accidental modification. The internal charge pump generates the high voltage needed for EEPROM programming, eliminating the need for external programming voltage.

Pin Description: AT24CM01-SHD-B Pin Definition and Functions
Pin Mnemonic Description
1-3 A0-A2 Address inputs for device cascading
4 GND Ground
5 SDA Serial data I/O (open-drain)
6 SCL Serial clock input
7 WP Write-protect input (active high)
8 VCC Power supply (2.5-5.5V)
Application Scenarios: In which products and applications is AT24CM01-SHD-B used
  • Industrial PLC configuration storage with 40-year retention and 1M-cycle endurance
  • Medical device calibration data logging across -40C to +85C operating range
  • Automotive ECU parameter storage with hardware write-protect for safety-critical data
  • IoT sensor node event logging with 6uA standby current on battery power
Alternative Models: What chips are recommended as replacements for AT24CM01-SHD-B
Model Manufacturer Key Difference
AT24CM02 Microchip 2Mbit density, same footprint
24LC1026 Microchip 1Mbit, 2.5V min, 400kHz only
M24M01 STMicroelectronics 1Mbit, 400kHz, TSSOP-8 option
BR24G1M Rohm 1Mbit, 1.6V min, 1.7MHz support

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1