Opens in a new tab

HDC2010YPAR

Digital humidity and temperature sensor, +/-2% RH, I2C, DSBGA-6

7800

Effective Inventory

Image for reference only

Manufacturer Part:

HDC2010YPAR

Package:

6-DSBGA (1.60 x 1.20 x 0.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HDC2010YPAR is a Texas Instruments integrated digital humidity and temperature sensor with 2% RH accuracy and 0.2C temperature accuracy. It features 50 nA sleep current, programmable resolution (9/11/14 bit), I2C interface, integrated heater, and programmable interrupt thresholds. The device operates from 1.62 V to 3.6 V in a 6-pin DSBGA (1.5×1.5 mm) WLCSP package.

Key Specifications

RH Accuracy +/-2%
Temp Accuracy +/-0.2C typical
RH Range 0% to 100%
Sleep Current 50 nA
Supply Voltage 1.62 V to 3.6 V
Interface I2C

Features

  • +/-2% RH accuracy, +/-0.2C temperature
  • 50 nA sleep current
  • Programmable resolution: 9, 11, 14 bit
  • I2C interface with address pin
  • Integrated heater for condensation removal
  • Programmable interrupt thresholds
  • Auto measurement mode with 7 ODR settings
  • Ultra-compact 1.5×1.5 mm WLCSP

Applications

  • Smart thermostats and HVAC
  • Wearable and IoT devices
  • Cold chain monitoring
  • Smart home assistants
Product Introduction: HDC2010YPAR Product Introduction

The Texas Instruments HDC2010YPAR is an ultra-low-power digital humidity and temperature sensor in a wafer-level chip-scale package (WLCSP/DSBGA-6) measuring just 1.60 x 1.20 x 0.50 mm—the smallest humidity sensor available. The device measures relative humidity with +/-2% accuracy (typical) from 0-100% RH and temperature with +/-0.2C accuracy from -40C to +125C. The 14-bit humidity resolution and 14-bit temperature resolution provide fine-grained environmental monitoring for HVAC, smart thermostats, wearables, and white goods. The supply current is only 550 nA average at 1 Hz measurement rate, enabling years of operation from a coin cell battery. The I2C interface (up to 400 kHz) provides read access to the humidity and temperature data registers, with a programmable address pin supporting two devices on a single bus. The device includes a programmable interrupt threshold for humidity and temperature, enabling event-driven architectures where the host MCU sleeps until an environmental threshold is crossed—critical for battery-powered HVAC and comfort monitoring systems. The optional integrated heating element (up to 130C for 2 minutes) removes condensation that can cause inaccurate humidity readings in high-humidity or rapid-temperature-change environments. Factory calibration ensures out-of-the-box accuracy without user calibration.

Working Principle: HDC2010YPAR Working Principle

The HDC2010 uses a capacitive humidity sensing element where the dielectric constant of a polymer film changes with absorbed water vapor, altering the capacitance of the sensing element. A delta-sigma capacitance-to-digital converter measures this capacitance change and outputs a 14-bit digital value proportional to relative humidity. The temperature sensor uses a bandgap-based PTAT (proportional to absolute temperature) circuit that generates a voltage proportional to temperature, which is then converted by a separate ADC. Both humidity and temperature measurements are factory-calibrated with correction coefficients stored in on-chip OTP memory—the correction is applied automatically during each measurement, requiring no user intervention. The measurement sequence is controlled by a state machine: the device wakes from sleep mode, performs the humidity measurement, performs the temperature measurement, updates the data registers, checks the interrupt thresholds, and returns to sleep. At 1 Hz measurement rate, the device is active for only 570 us per second, consuming 550 nA average. The I2C interface is used to configure the measurement rate (0-120 Hz), resolution (8/11/14 bits for humidity, 11/14 bits for temperature), interrupt thresholds, and heating element duration.

Pin Description: HDC2010YPAR Pin Definition and Functions
Pin Mnemonic Description
A1 SCL I2C clock input
A2 SDA I2C data I/O
B1 GND Ground
B2 ADDR I2C address select (GND/VDD)
C1 VDD Supply input (1.62-3.6V)
C2 DRDY/INT Data-ready / interrupt output
Application Scenarios: In which products and applications is HDC2010YPAR used
  • Smart thermostat with +/-2% RH accuracy and 550nA average current enabling 5+ year coin cell operation
  • Wearable fitness tracker with 1.6×1.2mm WLCSP fitting inside earbud housing for in-ear humidity monitoring
  • HVAC duct humidity sensor with integrated heater removing condensation after cold-start in high-humidity environments
  • White goods (washer/dryer) with programmable humidity threshold interrupt triggering MCU wake-up for cycle completion detection
Alternative Models: What chips are recommended as replacements for HDC2010YPAR
Model Manufacturer Key Difference
HDC2080 TI Larger DSBGA-8 package, +/-3% RH accuracy
SHT40I-AD1B-R3 Sensirion +/-1.8% RH, DFN-4, slightly larger
BME280 Bosch Humidity + temp + pressure, LGA-8, higher power
AHT20 Aosong +/-2% RH, DFN-6, lower cost

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1