Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » CP2102N-A01-GQFN28

CP2102N-A01-GQFN28

USB-to-UART bridge, full-speed USB 2.0, QFN-28, configurable VID/PID

9500

Effective Inventory

Image for reference only

Manufacturer Part:

CP2102N-A01-GQFN28

Package:

28-QFN (4.00 x 4.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CP2102N-A01-GQFN28 is a Silicon Labs highly integrated USB-to-UART bridge controller with USB 2.0 full-speed support. It integrates USB transceiver, clock oscillator, voltage regulator, and 1 KB OTP configuration memory. Data rates up to 3 Mbaud with royalty-free VCP drivers. Packaged in 28-pin QFN (5×5 mm), -40C to +85C.

Key Specifications

USB USB 2.0 Full-Speed
UART Baud Rate Up to 3 Mbps
Supply Voltage 2.2 V to 3.6 V
Operating Current 9.5 mA
OTP Memory 1 KB
GPIO 4 configurable

Features

  • No firmware development required
  • Integrated USB transceiver and clock
  • USB 2.0 full-speed compatible
  • Up to 3 Mbps UART data rate
  • 1 KB OTP for custom VID/PID/strings
  • USB Battery Charger Detection (BCS 1.2)
  • 4 configurable GPIO pins
  • Royalty-free Virtual COM port drivers

Applications

  • USB-to-serial adapters and dongles
  • MCU programming and debug interfaces
  • Industrial USB connectivity
  • IoT device firmware update ports
Product Introduction: CP2102N-A01-GQFN28 Product Introduction

The Silicon Labs CP2102N-A01-GQFN28 is a highly integrated USB-to-UART bridge controller that provides a seamless connection between a USB host and a UART serial port with no external crystal or EEPROM required. The device integrates a full-speed USB 2.0 transceiver, USB voltage regulator, clock generator, and programmable EEPROM in a single 4 x 4 mm QFN-28 package. The CP2102N supports data rates from 300 bps to 3 Mbps, covering the full range of standard UART baud rates. The configurable GPIO pins (up to 4) can be assigned as modem control signals (RTS, CTS, DTR, DSR, DCD, RI) or as general-purpose I/O controlled through the USB API. The integrated 1024-byte programmable EEPROM stores USB Vendor ID (VID), Product ID (PID), serial number, and device description strings—enabling custom device identification without external memory. The device supports USB suspend and resume with remote wake-up capability, and the automatic RS-485 bias generation simplifies half-duplex RS-485 network connections. The CP2102N includes a complete USB device driver stack with WHQL-certified drivers for Windows, built-in CDC-ACM driver support for Linux and macOS, and virtual COM port (VCP) drivers that present the USB connection as a standard COM port to application software—no custom USB driver development required.

Working Principle: CP2102N-A01-GQFN28 Working Principle

The CP2102N operates as a USB device implementing the USB Communications Device Class (CDC) Abstract Control Model (ACM). When connected to a USB host, the device enumerates using the VID/PID stored in its internal EEPROM (or the default Silicon Labs VID if the EEPROM is unprogrammed). The VCP driver on the host translates standard serial API calls (open, read, write, set baud rate, etc.) into USB control and bulk transfers that are received by the CP2102N. The CP2102N firmware converts the USB data packets into UART serial data on the TXD/RXD pins at the configured baud rate. The baud rate is generated by an internal fractional baud rate generator that can synthesize any standard or custom baud rate from 300 bps to 3 Mbps with less than 1% error—critical for reliable communication with UART peripherals. The GPIO pins are controlled via USB vendor-specific commands from the host, and their state is preserved across USB suspend/resume cycles. The RS-485 half-duplex control automatically deasserts the RS-485 driver enable signal after the last stop bit of the transmitted data, preventing bus contention without requiring precise timing from the host. The integrated voltage regulator derives 3.3V from the USB 5V VBUS supply, providing the device operating voltage and optionally supplying up to 100 mA to external circuitry.

Pin Description: CP2102N-A01-GQFN28 Pin Definition and Functions
Pin Mnemonic Description
1 VBUS USB VBUS detect input (5V from USB)
2 GND Ground
3 RXD UART receive data input
4 TXD UART transmit data output
5-8 GPIO0-3 Configurable GPIO or modem control
9 CTS Clear to send input
10 RTS Request to send output
11 DSR Data set ready input
12 DTR Data terminal ready output
13 DCD Data carrier detect input
14 RI Ring indicator input
15-16 SUSP/SUSPB USB suspend indicator outputs
17 REGIN Voltage regulator input (VBUS)
18 VREGOUT 3.3V regulator output (up to 100mA)
19 VBUS USB VBUS sense (alternate)
20-21 D+/D- USB data lines
22-28 GND/NC Ground and no-connect pins
Application Scenarios: In which products and applications is CP2102N-A01-GQFN28 used
  • USB debug/console port for embedded Linux SBC providing instant terminal access without RS-232 level converter
  • RS-485 network gateway with automatic half-duplex direction control connecting USB host to Modbus RTU network at 115200 baud
  • IoT device firmware upgrade port using DTR signal for automatic MCU reset into bootloader mode with single-cable USB connection
  • Custom USB product with programmable VID/PID and manufacturer string in EEPROM, appearing as a unique device to host software
Alternative Models: What chips are recommended as replacements for CP2102N-A01-GQFN28
Model Manufacturer Key Difference
CP2102N-A02-GQFN28 Silicon Labs Same device with different GPIO default config
CP2104 Silicon Labs 1Mbps max, QFN-24, fewer GPIO
FT232RQ FTDI Full-speed USB-UART, QFN-32, bit-bang mode
CH340G WCH USB-UART, SOIC-16, lower cost, 2Mbps

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1