Opens in a new tab

EPM240T100I5N

MAX II CPLD, 240 LE, 8Kbit UFM, 80 I/O, TQFP-100

3400

Effective Inventory

Image for reference only

Manufacturer Part:

EPM240T100I5N

Package:

100-Pin TQFP (14.0 x 14.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EPM240T100I5N is an Intel (Altera) MAX II CPLD with 240 logic elements, 8192 flash bits, and 80 user I/O pins. It features instant-on capability, low standby power, and multi-voltage I/O support. Packaged in 100-pin TQFP, -40C to +85C (I-grade).

Key Specifications

Logic Elements 240
Flash Storage 8,192 bits (User Flash)
I/O Pins 80
Performance Up to 201.1 MHz
Standby Power As low as 25 uA
Package TQFP-100

Features

  • 240 logic elements (macrocells)
  • 8Kbit user flash memory
  • 80 user I/O pins
  • Instant-on (no configuration load)
  • Multi-voltage I/O (1.5V, 1.8V, 2.5V, 3.3V)
  • Low standby power: 25uA typical
  • Internal oscillator and JTAG

Applications

  • Address decoding and bus interfacing
  • Power-on reset and glue logic
  • I/O expansion and protocol bridging
  • Configuration control for FPGAs
Product Introduction: EPM240T100I5N Product Introduction

The EPM240T100I5N is an Intel (Altera) MAX II CPLD with 240 logic elements and 8192 bits of user flash memory. MAX II devices use a flash-based architecture that provides instant-on capability with no external configuration device required, unlike SRAM-based FPGAs. The 80 user I/O pins support multi-voltage operation at 1.5V, 1.8V, 2.5V, and 3.3V I/O standards. The ultra-low 25uA standby current makes MAX II ideal for power-sensitive applications. The built-in user flash memory can store non-volatile data such as configuration constants or calibration data without an external EEPROM. An internal oscillator provides a free-running clock for standalone operation. The 100-pin TQFP package offers the I-grade (-40C to +85C) temperature range.

Working Principle: EPM240T100I5N Working Principle

The EPM240 uses Alteras MAX II architecture based on a 2D array of logic array blocks (LABs), each containing 10 logic elements (LEs). Each LE contains a 4-input look-up table (LUT), a programmable register, and carry/chain logic. The flash-based configuration storage is embedded in the device, eliminating the need for external configuration ROM and providing instant-on power-up. The MultiTrack interconnect provides routing between LABs with deterministic timing. The user flash memory (UFM) block is a separate 8192-bit flash sector accessible via the JTAG interface or through user logic, enabling on-chip non-volatile data storage. The internal oscillator runs at approximately 5.5MHz and can be divided down for low-frequency clocking.

Pin Description: EPM240T100I5N Pin Definition and Functions

100-pin TQFP with 80 user I/O (multi-voltage), VCCINT (1.8V or 2.5V core), VCCIO (1.5-3.3V per bank, 4 I/O banks), GND, TDI/TDO/TCK/TMS (JTAG), and dedicated clock inputs. Refer to datasheet pin map for complete 100-pin TQFP assignment.

Application Scenarios: In which products and applications is EPM240T100I5N used
  • Address decoding and memory-mapped I/O control in processor-based systems
  • Power-on reset sequencing and board management with instant-on flash
  • I/O expansion and protocol bridging (SPI-to-parallel, etc.)
  • FPGA configuration controller with 8Kbit UFM for storing bitstream parameters
Alternative Models: What chips are recommended as replacements for EPM240T100I5N
Model Manufacturer Key Difference
EPM240T100C5N Intel Commercial temp (0-70C)
EPM570T100I5N Intel 570 LE, more logic
XC9572XL Xilinx 72 macrocells, CoolRunner
LCMXO2-1200HC Lattice MachXO2, 1280 LUTs

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1