Opens in a new tab

ADUM2250ARWZ

Hot-swap dual I2C isolator, 5kVrms, 1Mbps, 30mA sink, SOIC-16W

614

Effective Inventory

Image for reference only

Manufacturer Part:

ADUM2250ARWZ

Package:

16-Pin SOIC Wide Body (7.5 x 10.3 x 2.65 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADUM2250ARWZ is an Analog Devices hot-swappable dual-channel I2C digital isolator with 5000Vrms isolation. It provides two bidirectional channels supporting a complete isolated I2C interface, 1Mbps data rate, and 30mA sink capability. Based on iCoupler magnetic isolation technology. Packaged in 16-pin SOIC wide body, -40C to +105C.

Key Specifications

Channels 2 bidirectional (I2C)
Isolation 5000 Vrms
Data Rate 1 Mbps
Supply 3.0 V to 5.5 V
CMTI +/-25 kV/us
Sink Current 30 mA

Features

  • 2 bidirectional I2C channels (SDA, SCL)
  • 5000Vrms isolation (UL 1577)
  • Hot-swappable (no glitches on insertion)
  • iCoupler magnetic isolation technology
  • 1Mbps data rate, open-drain I2C
  • 30mA sink current capability
  • 3.0V to 5.5V supply on each side

Applications

  • Isolated I2C, SMBus, PMBus
  • Multi-level I2C interfaces
  • Power supply digital isolation
  • Network and PoE isolated comm
Product Introduction: ADUM2250ARWZ Product Introduction

The ADUM2250ARWZ is an Analog Devices hot-swappable dual-channel I2C digital isolator providing 5000Vrms galvanic isolation between two I2C bus segments. The two bidirectional channels (SDA and SCL) support a complete isolated I2C interface without the need to split bidirectional signals into separate transmit and receive paths for optocouplers. The hot-swap circuitry prevents data glitches when an unpowered card is inserted onto an active I2C bus. The iCoupler magnetic isolation technology eliminates optocoupler limitations, providing better reliability, longer life, higher speed, and lower power consumption. The 1Mbps data rate supports fast-mode I2C and SMBus/PMBus protocols. The 30mA sink current capability on Side 2 handles heavily loaded I2C buses. The device operates from 3.0V to 5.5V on each side independently. Safety certifications include UL 1577, CSA, VDE, and IEC 60950-1/60601-1.

Working Principle: ADUM2250ARWZ Working Principle

The ADUM2250 uses ADIs iCoupler technology, where each isolation channel consists of a microscale on-chip transformer fabricated in planar IC process. The I2C bidirectional signals are internally split into two unidirectional paths communicating in opposite directions through dedicated transformer-isolated channels. A special input buffer differentiates between externally generated input signals and the devices own output signals, preventing bus contention and latch-up. When the device detects an externally driven logic low on Side 1, it transmits this to Side 2 which pulls the corresponding pin low. The input threshold is at least 50mV below the output low level, guaranteeing that the devices own output is never interpreted as an input. The hot-swap circuit suppresses glitches during live insertion by disabling outputs until VDD reaches the UVLO threshold. The 5000Vrms isolation rating is achieved through thick polyimide insulation between the transformer windings.

Pin Description: ADUM2250ARWZ Pin Definition and Functions
Pin Mnemonic Description
1,7 GND1 Side 1 ground
3 VDD1 Side 1 supply (3.0-5.5V)
5 SDA1 I2C data, Side 1
6 SCL1 I2C clock, Side 1
9,16 GND2 Side 2 ground
14 VDD2 Side 2 supply (3.0-5.5V)
11 SCL2 I2C clock, Side 2
12 SDA2 I2C data, Side 2
2,4,8,10,13,15 NC No connect
Application Scenarios: In which products and applications is ADUM2250ARWZ used
  • Isolated I2C/SMBus/PMBus communication between HV and LV domains in power supplies
  • Multi-level I2C bus isolation in server and telecom equipment
  • Hot-swappable I2C peripheral cards with glitch-free insertion
  • Medical equipment I2C sensor isolation with 5kVrms and IEC 60601-1 certification
Alternative Models: What chips are recommended as replacements for ADUM2250ARWZ
Model Manufacturer Key Difference
ADUM2250ARIZ ADI Enhanced creepage SOIC-16
ADUM2251ARWZ ADI 1 bidir + 1 unidirectional
ADUM1250ARWZ ADI 2.5kV isolation, lower cost
ISO1540 TI Similar I2C isolator

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1