Opens in a new tab

ADUM3160BRWZ-RL

USB 2.0 isolator, 12Mbps, 2.5kVrms, iCoupler, SOIC-16W

2700

Effective Inventory

Image for reference only

Manufacturer Part:

ADUM3160BRWZ-RL

Package:

16-Lead SOIC Wide Body (7.5 x 10.3 x 2.65 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADUM3160BRWZ-RL is an Analog Devices full/low speed USB digital isolator with 2500Vrms isolation using iCoupler magnetic technology. It supports USB 2.0 at 1.5Mbps (low) and 12Mbps (full), bidirectional D+/D- communication, and >25kV/us CMTI. Packaged in 16-lead SOIC wide body, -40C to +105C.

Key Specifications

USB Speed Full (12Mbps) / Low (1.5Mbps)
Isolation 2500 Vrms (UL 1577)
CMTI >25 kV/us
Supply 4.5 V to 5.5 V (VBUS)
Upstream IQ 7 mA max @ 1.5Mbps
Temp Range -40C to +105C

Features

  • USB 2.0 full and low speed
  • 2500Vrms galvanic isolation
  • iCoupler magnetic isolation technology
  • Bidirectional D+/D- communication
  • 12Mbps and 1.5Mbps data rates
  • >25kV/us CMTI
  • Speed select pins (SPU, SPD)
  • Isolated pull-up control (PIN)

Applications

  • USB peripheral isolation
  • Isolated USB hubs
  • Medical USB device isolation
  • Industrial USB data acquisition
Product Introduction: ADUM3160BRWZ-RL Product Introduction

The ADUM3160BRWZ-RL is an Analog Devices USB digital isolator based on iCoupler magnetic isolation technology, providing 2500Vrms galvanic isolation for USB 2.0 full-speed (12Mbps) and low-speed (1.5Mbps) communication. Unlike general-purpose digital isolators, the ADuM3160 is specifically designed for USB D+/D- bidirectional signaling, automatically detecting data direction on a packet-by-packet basis. The SPU and SPD speed-select pins configure the upstream and downstream ports for full or low speed operation. The PIN pin provides isolated control of the upstream pull-up resistor for proper USB enumeration timing. The device operates from VBUS (4.5V to 5.5V) on each side and internally regulates to the required signal levels. The >25kV/us CMTI and VDE/UL/CSA safety certifications ensure reliable operation in industrial and medical environments. The -RL suffix indicates tape-and-reel packaging. A 5kV reinforced insulation version (ADuM4160) is available for medical applications.

Working Principle: ADUM3160BRWZ-RL Working Principle

The ADuM3160 uses edge-detection based iCoupler technology with internal direction-detection logic to implement transparent USB isolation. The D+ and D- lines carry bidirectional USB signals that switch between driven and idle states. The internal logic monitors the bus state on both sides to determine the current data direction (upstream or downstream). When an edge is detected on the driving side, the corresponding iCoupler channel transmits the transition to the isolated side, which reproduces the edge on its D+/D- outputs. When the bus returns to idle (both D+ and D- driven by pull-up/pull-down resistors), the isolator tri-states its outputs and allows the passive termination to set the bus state. The speed select pins (SPU, SPD) configure the internal slew rate limiting and timing to match full-speed or low-speed USB specifications. The internal LDO regulators derive the signal-level supply from VBUS.

Pin Description: ADUM3160BRWZ-RL Pin Definition and Functions
Pin Mnemonic Description
1 VBUS1 Side 1 VBUS supply (4.5-5.5V)
2,8 GND1 Side 1 ground
3 VDD1 Side 1 logic supply
4 PDEN Pull-down enable
5 SPU Speed select upstream
6 UD- Upstream D-
7 UD+ Upstream D+
9,15 GND2 Side 2 ground
10 DD+ Downstream D+
11 DD- Downstream D-
12 PIN Pull-up enable (isolated)
13 SPD Speed select downstream
14 VDD2 Side 2 logic supply
16 VBUS2 Side 2 VBUS supply
Application Scenarios: In which products and applications is ADUM3160BRWZ-RL used
  • USB peripheral isolation in medical devices with 2500Vrms and IEC 60601-1
  • Isolated USB hub for industrial data acquisition breaking ground loops
  • USB debug and programming port isolation on motor drive controllers
  • Laboratory instrument USB interface isolation with >25kV/us CMTI
Alternative Models: What chips are recommended as replacements for ADUM3160BRWZ-RL
Model Manufacturer Key Difference
ADUM4160BRWZ ADI 5kV reinforced insulation
ADUM3160WBRWZ-RL ADI AEC-Q100 automotive
ISOUSB111 TI Similar USB isolator
SI8620 Silicon Labs General-purpose, not USB

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1