Opens in a new tab

MSP430F5419AIPZR

MSP430 MCU, 128KB Flash, 16KB RAM, 25MHz, 12-bit ADC, LQFP-100

7800

Effective Inventory

Image for reference only

Manufacturer Part:

MSP430F5419AIPZR

Package:

100-Pin LQFP (16.0 x 16.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MSP430F5419AIPZR is a Texas Instruments 16-bit ultra-low-power MCU with 128KB Flash, 16KB SRAM, 25MHz, 12-bit ADC with 14 channels, 4x USCI (UART/SPI/I2C), DMA, and hardware multiplier. Packaged in 100-pin LQFP, -40C to +85C.

Key Specifications

Core MSP430 16-bit RISC
Flash 128 KB
RAM 16 KB
Speed 25 MHz
ADC 12-bit SAR, 14 channels
GPIO 87

Features

  • 128KB Flash, 16KB SRAM
  • 25MHz 16-bit RISC CPU
  • 12-bit ADC with 14 external channels
  • 4x USCI (UART/SPI/I2C each)
  • 3-channel DMA controller
  • Hardware 32-bit multiplier
  • Ultra-low-power: 1.7uA LPM3

Applications

  • Portable medical instruments
  • Industrial sensing and metering
  • Ultra-low-power data loggers
  • Consumer electronics
Product Introduction: MSP430F5419AIPZR Product Introduction

The MSP430F5419AIPZR is a Texas Instruments MSP430F5xx series 16-bit ultra-low-power mixed-signal microcontroller with 128KB Flash, 16KB SRAM, and 25MHz CPU speed. The 16-bit RISC architecture with constant generators achieves high code efficiency and fast execution. The 12-bit SAR ADC provides 14 external channels with internal reference, sample-and-hold, and auto-scan feature for multi-channel acquisition. Four USCI modules (USCI_A0-A3 and USCI_B0-B3) each support UART with auto-baud, IrDA, SPI, and I2C, providing extensive communication flexibility. The 3-channel DMA controller transfers data between memory and peripherals without CPU intervention, reducing power consumption. The hardware multiplier supports 32-bit operations for efficient DSP-like calculations. Ultra-low-power modes include LPM3 at 1.7uA with full RAM retention and 3.5us wakeup, and LPM4.5 at 0.1uA. Packaged in 100-pin LQFP rated for -40C to +85C.

Working Principle: MSP430F5419AIPZR Working Principle

The MSP430F5419A uses a 16-bit RISC CPU with a two-stage instruction pipeline, executing most instructions in a single clock cycle. The digitally controlled oscillator (DCO) provides the main system clock (MCLK) up to 25MHz with fast 3.5us wakeup from low-power modes. The unified clock system includes FLL for frequency stabilization, low-frequency crystal oscillator (XT1), and high-frequency crystal up to 32MHz. The power management module (PMM) with integrated LDO regulates the core voltage for optimal power efficiency across the 1.8V to 3.6V supply range. The ADC12 uses a successive approximation register architecture with a configurable sample-and-hold timer. The USCI modules implement UART/SPI/I2C with independent baud rate generators. The DMA controller supports block, burst, and single transfers triggered by peripheral events. Low-power modes progressively disable clocks and analog peripherals, with LPM4.5 shutting down the PMM for absolute minimum current.

Pin Description: MSP430F5419AIPZR Pin Definition and Functions

100-pin LQFP with 87 GPIO organized in Ports P1-P11 and PJ. Peripherals mapped to ports: USCI_A/B (UART/SPI/I2C), Timer_A/B (capture/compare/PWM), ADC12 (analog inputs A0-A13), JTAG/SBW (debug), RST/NMI, XIN/XOUT (crystal), AVCC/AVSS (analog supply), DVCC/DVSS (digital supply), VCORE. Refer to datasheet for complete 100-pin LQFP mapping.

Application Scenarios: In which products and applications is MSP430F5419AIPZR used
  • Portable medical instruments with 12-bit ADC for sensor acquisition and 4x UART for communication
  • Industrial sensing and metering with DMA-driven multi-channel ADC and I2C display
  • Ultra-low-power data loggers with 1.7uA LPM3 standby and 3.5us wakeup
  • Consumer electronics with 128KB Flash for complex firmware and 87 GPIO
Alternative Models: What chips are recommended as replacements for MSP430F5419AIPZR
Model Manufacturer Key Difference
MSP430F5438AIPZR TI 256KB Flash, more RAM
MSP430F5418AIPZR TI 64KB Flash, smaller
MSP430FR5994 TI FRAM-based, lower power
EFM32GG990 Silicon Labs Similar low-power ARM

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1