Opens in a new tab

LT1761ES5-5#TRPBF

150mA LDO, 5V fixed, 20uA IQ, 10uVrms noise, SOT-23-5

7200

Effective Inventory

Image for reference only

Manufacturer Part:

LT1761ES5-5#TRPBF

Package:

5-Lead SOT-23 (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LT1761ES5-5#TRPBF is an Analog Devices micropower 150mA LDO regulator with fixed 5V output, 20uA quiescent current, and very low 10uVrms output noise. It operates from 5.5V to 20V input with 300mV dropout. Packaged in 5-lead SOT-23, -40C to +125C.

Key Specifications

Output 5.0 V (fixed)
Output Current 150 mA
Dropout 300 mV typical
IQ 20 uA
Output Noise 10 uVrms (10Hz-100kHz)
Input Range 5.5 V to 20 V

Features

  • Fixed 5V output, 150mA
  • 20uA micropower quiescent current
  • 10uVrms ultra-low output noise
  • 300mV dropout voltage
  • 5.5V to 20V input range
  • 1uA shutdown current
  • 5-lead SOT-23 package

Applications

  • Noise-sensitive analog circuits
  • RF and VCO power supply
  • Battery-powered instruments
  • Low-noise sensor power
Product Introduction: LT1761ES5-5#TRPBF Product Introduction

The LT1761ES5-5#TRPBF is an Analog Devices micropower low-noise 150mA LDO regulator with fixed 5V output in a 5-lead SOT-23 package. The standout feature is the 10uVrms output noise over the 10Hz to 100kHz bandwidth, making it one of the quietest LDOs available for noise-sensitive analog and RF applications such as VCO power, GPS receivers, and high-resolution ADC references. The 20uA quiescent current minimizes battery drain in portable instruments, while the 1uA shutdown current preserves battery life in sleep modes. The 300mV typical dropout voltage at full load allows operation from a 5.3V minimum input. A single 0.01uF bypass capacitor on the BYP pin reduces output noise to the specified 10uVrms level. The input range extends to 20V for wide-input-rail applications. The device uses an internal PNP pass transistor for low dropout, with current limit and thermal shutdown protection. Packaged in 5-lead SOT-23 rated for -40C to +125C.

Working Principle: LT1761ES5-5#TRPBF Working Principle

The LT1761 uses a PNP pass transistor for low dropout operation. The error amplifier compares a resistive divider tap of the output voltage with an internal 5V bandgap reference, driving the PNP pass transistor to maintain regulation. The low 20uA quiescent current is achieved through careful biasing of the internal reference and error amplifier. The ultra-low 10uVrms output noise is achieved by using a low-noise reference and a single-pole RC filter on the BYP pin. The BYP pin connects to the internal reference through an internal resistor; adding an external 0.01uF capacitor to ground creates a low-pass filter that filters reference noise before it reaches the error amplifier. This noise reduction technique preserves the reference accuracy while dramatically reducing the output noise spectral density. The shutdown pin disables the pass transistor and most internal circuitry, reducing supply current to 1uA.

Pin Description: LT1761ES5-5#TRPBF Pin Definition and Functions
Pin Mnemonic Description
1 IN Input supply (5.5-20V)
2 GND Ground
3 EN Enable/Shutdown (active high)
4 BYP Noise bypass (0.01uF cap to GND)
5 OUT 5V regulated output
Application Scenarios: In which products and applications is LT1761ES5-5#TRPBF used
  • Noise-sensitive VCO and PLL power supply requiring 10uVrms output noise
  • High-resolution ADC reference supply with 20uA IQ in battery systems
  • GPS receiver and RF front-end LNA power with ultra-low noise
  • Portable medical instrument 5V analog supply with 1uA shutdown
Alternative Models: What chips are recommended as replacements for LT1761ES5-5#TRPBF
Model Manufacturer Key Difference
LT1761ES5-3.3#TRPBF ADI Fixed 3.3V version
LT1761ES5-ADJ#TRPBF ADI Adjustable output version
LT1962 ADI Similar, higher current
TPS7A4700 TI Ultra-low noise, 1A

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1