Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » ADG1419BRMZ-REEL7

ADG1419BRMZ-REEL7

SPDT switch, 1.5ohm Ron, +/-15V, 20pC, MSOP-8

4500

Effective Inventory

Image for reference only

Manufacturer Part:

ADG1419BRMZ-REEL7

Package:

8-Lead MSOP (3.0 x 3.0 x 0.85 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADG1419BRMZ-REEL7 is an Analog Devices iCMOS single-pole double-throw (SPDT) analog switch with 1.5 ohm on-resistance, +/-15V supply, and low 20pC charge injection. It is ideal for precision signal routing with minimal distortion. Packaged in 8-lead MSOP, -40C to +125C.

Key Specifications

Configuration SPDT (1 form C)
Ron 1.5 ohm typical
Supply +/-15V or 12V single
Charge Injection 20 pC
Bandwidth 210 MHz
Package 8-Lead MSOP

Features

  • SPDT (1 normally-open, 1 normally-closed)
  • 1.5 ohm ultra-low on-resistance
  • +/-15V dual supply operation
  • 20pC low charge injection
  • 210MHz bandwidth
  • Break-before-make switching

Applications

  • Precision signal routing
  • Relay replacement
  • Gain switching in amplifiers
  • Medical instrumentation
Product Introduction: ADG1419BRMZ-REEL7 Product Introduction

The ADG1419BRMZ-REEL7 is an Analog Devices iCMOS single-pole double-throw (SPDT) analog switch in an 8-lead MSOP package. The SPDT configuration provides one normally-open (NO) and one normally-closed (NC) switch path, making it a direct solid-state replacement for electromechanical Form C relays. The ultra-low 1.5 ohm typical on-resistance minimizes signal attenuation and voltage drop in precision signal paths. The iCMOS process enables +/-15V dual supply operation for full analog signal range. The 20pC charge injection is among the lowest for this class, minimizing offset errors in sampled-data systems such as sample-and-hold circuits and integrators. The 210MHz bandwidth supports high-frequency signal routing. Break-before-make switching prevents momentary shorting between the NO and NC paths during transitions. The low on-resistance flatness (0.1 ohm typical) ensures minimal distortion across the signal range. Packaged in 8-lead MSOP rated for -40C to +125C.

Working Principle: ADG1419BRMZ-REEL7 Working Principle

The ADG1419 contains a single SPDT switch implemented with two CMOS transmission gates sharing a common drain (D) terminal. One transmission gate connects D to S1 (normally-open path), and the other connects D to S2 (normally-closed path). The IN control pin determines which path is active: when IN is high, D connects to S1; when IN is low, D connects to S2. Each transmission gate consists of parallel NMOS and PMOS transistors for rail-to-rail signal capability. The iCMOS process with thick-gate-oxide transistors allows +/-15V supply operation while maintaining low on-resistance. Break-before-make logic ensures a brief dead time (both paths open) during switching, preventing signal feedthrough between S1 and S2. The 1.5 ohm on-resistance is achieved through large MOSFET channel geometries and optimized process doping. Charge injection occurs during switching as clock feedthrough from the gate to the channel through parasitic overlap capacitance.

Pin Description: ADG1419BRMZ-REEL7 Pin Definition and Functions
Pin Mnemonic Description
1 S1 Source 1 (normally open)
2 S2 Source 2 (normally closed)
3 D Drain (common)
4 GND Ground
5 IN Control input
6 VSS Negative supply
7 VDD Positive supply
8 NC No connect
Application Scenarios: In which products and applications is ADG1419BRMZ-REEL7 used
  • Precision instrumentation gain switching with 1.5ohm and 20pC charge injection
  • Solid-state Form C relay replacement with +/-15V signal range
  • Medical ECG/EEG lead selection with break-before-make switching
  • Audio signal routing with 210MHz bandwidth and low distortion
Alternative Models: What chips are recommended as replacements for ADG1419BRMZ-REEL7
Model Manufacturer Key Difference
ADG1419BRZ-REEL7 ADI SOIC-8 package
ADG1439 ADI SPDT, lower Ron
ADG719 ADI SPDT, 12V single
TS5A3159 TI SPDT, 5V single

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1