Opens in a new tab

LMR50410XDBVR

42V 100mA buck, 15uA IQ, 1MHz, SOT-23-6

15000

Effective Inventory

Image for reference only

Manufacturer Part:

LMR50410XDBVR

Package:

6-Pin SOT-23 (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMR50410XDBVR is a Texas Instruments 42V 100mA ultra-small buck converter in a SOT-23 package. It features 3.5V to 42V input, fixed 3.3V or 5V output options, 1MHz switching, and 15uA IQ. Designed for always-on battery-powered systems.

Key Specifications

Input Voltage 3.5 V to 42 V
Output Current 100 mA
Output Options 3.3V / 5V fixed
IQ 15 uA typical
Frequency 1 MHz
Package SOT-23-6

Features

  • 42V maximum input voltage
  • 100mA output current
  • 15uA ultra-low quiescent current
  • 1MHz fixed switching frequency
  • Fixed 3.3V or 5V output (X suffix)
  • Internal compensation
  • SOT-23-6 ultra-small package

Applications

  • Industrial sensor power from 24V
  • Battery-powered always-on systems
  • Automative 12V/24V bus POL
  • Building automation power
Product Introduction: LMR50410XDBVR Product Introduction

The LMR50410XDBVR is a Texas Instruments 42V 100mA step-down converter in an ultra-compact SOT-23-6 package, designed for always-on battery-powered and industrial systems. The 3.5V to 42V input range supports direct connection to 12V/24V automotive and industrial bus rails, as well as multi-cell battery packs. The 15uA typical quiescent current minimizes battery drain in always-on applications such as standby power and housekeeping supplies. The 1MHz fixed switching frequency and internal compensation minimize external component count to just three parts (input cap, inductor, output cap). The X suffix indicates the fixed output voltage option (3.3V or 5V selected by part number variant). The device uses DCS-Control (Direct Current Sum control) for seamless transition between PWM and PFM modes, maintaining high efficiency from 100mA down to microampere load levels. Current-mode control provides fast transient response and cycle-by-cycle current limiting. Packaged in SOT-23-6 rated for -40C to +125C.

Working Principle: LMR50410XDBVR Working Principle

The LMR50410 uses Texas Instruments DCS-Control topology, a proprietary control scheme that combines current-mode PWM for heavy loads with pulse-frequency modulation (PFM) for light loads. At loads above approximately 20mA, the converter operates in fixed 1MHz PWM mode for low output ripple and tight regulation. As the load decreases below the PFM threshold, the converter enters PFM skip mode where switching pulses are issued only when the output voltage drops below the regulation threshold, reducing effective switching frequency and minimizing gate drive and switching losses. The transition between modes is seamless with no output voltage discontinuity. The high-side P-channel MOSFET switch is integrated, and the low-side NMOS synchronous rectifier eliminates the need for an external Schottky diode. The internal compensation network is optimized for a wide range of output inductors and capacitors, ensuring stability without external compensation components.

Pin Description: LMR50410XDBVR Pin Definition and Functions
Pin Mnemonic Description
1 CB Bootstrap capacitor
2 GND Ground
3 FB Feedback (connect to VOUT for fixed)
4 EN Enable (active high)
5 VIN Input supply (3.5-42V)
6 SW Switch node to inductor
Application Scenarios: In which products and applications is LMR50410XDBVR used
  • Industrial sensor 3.3V/5V supply from 24V bus with 15uA always-on IQ
  • Automotive 12V/24V to 5V POL converter with 42V input transient tolerance
  • Multi-cell Li-ion battery to 3.3V for low-power MCU with PFM mode efficiency
  • Building automation 24VAC rectified to 3.3V with three-component solution
Alternative Models: What chips are recommended as replacements for LMR50410XDBVR
Model Manufacturer Key Difference
LMR50410Y3DBVR TI Fixed 3.3V output
LMR50410Y5DBVR TI Fixed 5V output
LMR16010 TI 60V input, 150mA
MAX17503 Maxim Similar 42V buck

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1