Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » ADG1208YRUZ-REEL7

ADG1208YRUZ-REEL7

8:1 mux, 120ohm, <1pC, 1pF Coff, +/-15V, TSSOP-16

3100

Effective Inventory

Image for reference only

Manufacturer Part:

ADG1208YRUZ-REEL7

Package:

16-Lead TSSOP (5.0 x 4.4 x 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADG1208YRUZ-REEL7 is an Analog Devices low-capacitance 8-channel iCMOS multiplexer with 120 ohm on-resistance, +/-15V supply, <1pC charge injection, and 33V supply range. Y-grade for -40C to +125C. Packaged in 16-lead TSSOP.

Key Specifications

Configuration 8:1 multiplexer
Ron 120 ohm typical
Charge Injection <1 pC
Coff 1 pF
Supply +/-5V to +/-16.5V
Bandwidth >200 MHz

Features

  • 8:1 single-channel multiplexer
  • 120 ohm on-resistance
  • <1pC ultra-low charge injection
  • 1pF off-capacitance
  • +/-15V or 12V operation
  • 3-bit address + enable control
  • Break-before-make switching

Applications

  • Precision data acquisition
  • Sample-and-hold systems
  • Medical ultrasound
  • Audio and video routing
Product Introduction: ADG1208YRUZ-REEL7 Product Introduction

The ADG1208YRUZ-REEL7 is an Analog Devices low-capacitance 8-channel iCMOS multiplexer in a 16-lead TSSOP package. The device switches one of eight inputs (S1-S8) to a common output (D) as determined by 3-bit binary address lines A0-A2 and an enable (EN) input. The iCMOS process enables +/-15V dual supply or 12V single supply operation for wide analog signal range. The standout specification is the less than 1pC charge injection over the full signal range, making the ADG1208 ideal for precision sample-and-hold circuits and integrators where charge injection causes offset errors. The 1pF off-capacitance minimizes parasitic loading on unselected channels at high frequencies. The 120 ohm typical on-resistance with low on-resistance flatness ensures minimal signal distortion. The Y-grade extends the operating temperature to -40C to +125C for industrial applications. Break-before-make switching prevents channel-to-channel shorting during transitions. Ultra-low power dissipation (less than 0.03uW typical) makes it suitable for battery-powered instruments.

Working Principle: ADG1208YRUZ-REEL7 Working Principle

The ADG1208 uses eight CMOS transmission gates, each connecting one source input (S1-S8) to the common drain output (D). The 3-bit address decoder selects which transmission gate is active. Each transmission gate consists of parallel NMOS and PMOS transistors that provide rail-to-rail signal capability with 120 ohm on-resistance. The iCMOS process uses thick-gate-oxide high-voltage transistors for +/-15V operation while maintaining low capacitance and charge injection. When a channel is selected, both NMOS and PMOS switches conduct; when deselected, both are off, presenting only 1pF capacitance to the signal path. Charge injection occurs when the gate voltage transitions, coupling charge through the overlap capacitance to the channel; the iCMOS process minimizes this effect through careful transistor sizing and symmetrical NMOS/PMOS layout. Break-before-make logic ensures the previously selected channel is fully disconnected before the new channel connects.

Pin Description: ADG1208YRUZ-REEL7 Pin Definition and Functions
Pin Mnemonic Description
1 A0 Address bit 0
2 EN Enable (active high)
3 VSS Negative supply
4-7 S1-S4 Source inputs 1-4
8 D Common drain output
9-12 S5-S8 Source inputs 5-8
13 VDD Positive supply
14 GND Ground
15,16 A1,A2 Address bits 1,2
Application Scenarios: In which products and applications is ADG1208YRUZ-REEL7 used
  • Precision data acquisition with 8-channel ADC input multiplexing and <1pC charge injection
  • Sample-and-hold circuit channel selection with ultra-low glitch energy
  • Medical ultrasound transducer switching with 1pF off-capacitance
  • Audio signal routing with +/-15V supply and low distortion
Alternative Models: What chips are recommended as replacements for ADG1208YRUZ-REEL7
Model Manufacturer Key Difference
ADG1208ARSZ ADI SOIC-16 package
ADG1209YRUZ ADI Dual 4:1 mux variant
MUX36S08 TI Similar 8:1 mux
DG408 Renesas 8:1, higher Ron

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1