Opens in a new tab

TPS54202HDDCR

2A 28V buck, 500kHz, spread EMI, SOT-23-6

6579

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54202HDDCR

Package:

6-Pin SOT-23 (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS54202HDDCR is a Texas Instruments 2A 28V synchronous buck converter with 500kHz switching, 45uA IQ, internal compensation, spread spectrum for EMI, and Eco-mode. Packaged in SOT-23-6, -40C to +125C.

Key Specifications

Input Voltage 4.5 V to 28 V
Output Current 2 A
Frequency 500 kHz
IQ 45 uA
RDS(on) HS 148 mohm
EMI Spread spectrum

Features

  • 4.5V to 28V input range
  • 2A output, 148mohm HS FET
  • 500kHz fixed switching
  • Spread spectrum for EMI
  • Advanced Eco-mode light-load
  • Internal soft-start (5ms)
  • Hiccup-mode OCP

Applications

  • 12V/24V distributed bus
  • White goods and appliances
  • Consumer audio/video
  • Printer and STB power
Product Introduction: TPS54202HDDCR Product Introduction

The TPS54202HDDCR is a Texas Instruments 2A synchronous step-down converter in an ultra-compact SOT-23-6 package. The 4.5V to 28V input range covers 12V and 24V distributed bus architectures in industrial and consumer applications. The integrated 148mohm high-side and 78mohm low-side MOSFETs deliver 2A continuous output with high efficiency. The 500kHz fixed switching frequency with spread spectrum modulation reduces peak EMI emissions, simplifying compliance with CISPR 32 and FCC Part 15. Advanced Eco-mode pulse skipping maximizes light-load efficiency for always-on standby power supplies. The internal compensation and 5ms soft-start minimize external component count and design complexity. Peak current-mode control provides fast transient response. Both MOSFETs are protected by hiccup-mode overcurrent, which limits average dissipation during sustained overloads. Overvoltage protection and thermal shutdown provide additional fault handling. The 45uA operating IQ and 2uA shutdown IQ minimize standby power. Packaged in SOT-23-6 rated for -40C to +125C.

Working Principle: TPS54202HDDCR Working Principle

The TPS54202H uses peak current-mode PWM control with integrated MOSFETs. The high-side NMOS (148mohm) and low-side NMOS (78mohm) form a synchronous buck half-bridge. The BOOT pin capacitor provides gate drive voltage for the high-side NMOS. The FB pin connects to an external resistor divider that sets the output voltage (0.8V reference). The error amplifier adjusts the peak current command based on the FB error. The spread spectrum modulator applies frequency dithering of approximately +/-6% to the 500kHz clock, spreading the switching harmonic energy across a wider bandwidth and reducing peak emissions at any single frequency. Eco-mode skips switching pulses at light loads, reducing effective switching frequency to minimize gate drive and switching losses. The internal soft-start gradually increases the current limit during startup, preventing inrush current overshoot. Hiccup-mode OCP disables switching for a recovery period after 128 consecutive overcurrent events, limiting average power dissipation during faults.

Pin Description: TPS54202HDDCR Pin Definition and Functions
Pin Mnemonic Description
1 GND Ground
2 SW Switch node
3 VIN Input supply (4.5-28V)
4 FB Feedback (0.8V ref)
5 EN Enable (pull high)
6 BOOT Bootstrap capacitor
Application Scenarios: In which products and applications is TPS54202HDDCR used
  • 12V/24V industrial distributed bus to 5V/3.3V POL with spread spectrum EMI reduction
  • White goods appliance 24V to 5V supply with Eco-mode standby efficiency
  • Consumer audio/video product 12V to 3.3V with internal compensation and small solution
  • Printer and set-top box 12V to 5V with 2A output and hiccup OCP
Alternative Models: What chips are recommended as replacements for TPS54202HDDCR
Model Manufacturer Key Difference
TPS54202DDCR TI Non-H version, no spread
TPS54302DDCR TI 3A version
TPS562201 TI Similar, lower cost
MP8759 MPS Similar 2A buck

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1