Opens in a new tab

LAN8710AI-EZK

10/100 Ethernet PHY, RMII/MII, Auto-MDIX, IEEE1588, QFN-32

3500

Effective Inventory

Image for reference only

Manufacturer Part:

LAN8710AI-EZK

Package:

32-Pin QFN (5.0 x 5.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LAN8710AI-EZK is a Microchip (SMSC) 10/100 Ethernet PHY with RMII/MII interface, HP Auto-MDIX, IEEE 1588 PTP support, and flexible I/O voltage. Industrial temperature range. Packaged in 32-pin QFN, -40C to +85C.

Key Specifications

Speed 10/100 Mbps
Interface RMII / MII
MDIX HP Auto-MDIX
PTP IEEE 1588
IO Voltage 1.6V to 3.6V
Package 32-pin QFN

Features

  • 10/100 Ethernet transceiver
  • RMII and MII MAC interface
  • HP Auto-MDIX crossover
  • IEEE 1588 PTP timestamping
  • Flexible I/O voltage
  • Energy-efficient Ethernet (EEE)
  • Industrial temperature range

Applications

  • Embedded Ethernet connectivity
  • Industrial networking
  • IoT gateways
  • Consumer electronics LAN
Product Introduction: LAN8710AI-EZK Product Introduction

The LAN8710AI-EZK is a Microchip (formerly SMSC) 10/100 Ethernet physical layer transceiver (PHY) in a 32-pin QFN package. The device provides the physical layer function for 10BASE-T and 100BASE-TX Ethernet, with RMII (Reduced Media Independent Interface) and MII MAC interface options selected at strap or register configuration. HP Auto-MDIX eliminates the need for crossover cables by automatically detecting and correcting the MDI/MDIX configuration. IEEE 1588 Precision Time Protocol (PTP) support provides hardware timestamping for time-synchronized industrial Ethernet applications such as PROFINET and EtherCAT. The flexible I/O voltage (1.6V to 3.6V) allows direct connection to MACs operating at different voltage domains. Energy Efficient Ethernet (EEE) support reduces power consumption during idle periods. The MII management interface (MDIO/MDC) provides register access for configuration and status monitoring. The -I suffix indicates industrial temperature range (-40C to +85C). The EZK suffix indicates QFN-32 tape-and-reel packaging.

Working Principle: LAN8710AI-EZK Working Principle

The LAN8710A implements the IEEE 802.3 physical layer for 10BASE-T and 100BASE-TX. The 100BASE-TX transmitter performs 4B/5B encoding, scrambling, MLT-3 encoding, and digital-to-analog conversion of the transmit data from the MAC. The receiver performs the inverse: analog-to-digital conversion, MLT-3 decoding, descrambling, and 4B/5B decoding. The 10BASE-T mode uses Manchester encoding at 10Mbps. The RMII interface reduces the MAC-to-PHY pin count to 9 signals (TXD[1:0], RXD[1:0], TX_EN, CRS_DV, REF_CLK, MDIO, MDC) compared to 16 for MII. Auto-negotiation advertises and detects the highest common speed and duplex capability with the link partner. Auto-MDIX exchanges the transmit and receive pairs when a crossover condition is detected, eliminating cable polarity issues. The IEEE 1588 timestamping logic captures the precise time of packet transmission and reception for PTP synchronization. The MDIO/MDC management interface allows the MAC to read and write PHY configuration registers per Clause 22 of IEEE 802.3.

Pin Description: LAN8710AI-EZK Pin Definition and Functions

32-pin QFN with key signals: TXD0/TXD1 (RMII transmit data), RXD0/RXD1 (receive data), TX_EN (transmit enable), CRS_DV (carrier sense/data valid), REF_CLK (RMII reference clock 50MHz), MDC/MDIO (management interface), RXER (receive error), INT (interrupt), nRST (reset), VDD (1.8V/2.5V/3.3V core), VDDIO (flexible I/O), TXP/TXN (line transmit), RXP/RXN (line receive). Refer to datasheet for complete 32-pin QFN ball map.

Application Scenarios: In which products and applications is LAN8710AI-EZK used
  • Embedded MCU Ethernet connectivity with RMII interface and HP Auto-MDIX
  • Industrial PROFINET/EtherCAT node with IEEE 1588 PTP hardware timestamping
  • IoT gateway 10/100 Ethernet with Energy Efficient Ethernet for low power
  • Consumer electronics LAN port with flexible I/O voltage MAC connection
Alternative Models: What chips are recommended as replacements for LAN8710AI-EZK
Model Manufacturer Key Difference
LAN8720A Microchip RMII only, smaller
KSZ8081 Microchip Similar RMII PHY
DP83848 TI Similar MII/RMII PHY
RTL8201F Realtek Similar 10/100 PHY

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1