Opens in a new tab

STM8S105C4T6TR

STM8 MCU, 16KB Flash, 1KB RAM, 1KB EEPROM, LQFP-48

6200

Effective Inventory

Image for reference only

Manufacturer Part:

STM8S105C4T6TR

Package:

48-Pin LQFP (7.0 x 7.0 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM8S105C4T6TR is a STMicroelectronics 8-bit STM8 MCU with 16KB Flash, 1KB RAM, 1KB EEPROM, 10-bit ADC, 16MHz, UART/SPI/I2C, and 3 timers. Packaged in LQFP-48, -40C to +85C.

Key Specifications

Core STM8 8-bit
Flash 16 KB
RAM 1 KB
EEPROM 1 KB
Speed 16 MHz
GPIO 38

Features

  • 16KB Flash, 1KB RAM, 1KB EEPROM
  • 16MHz STM8 core with 3-stage pipeline
  • 10-bit ADC, 10 channels
  • UART, SPI, I2C interfaces
  • 3x 16-bit timers
  • Clock security system
  • SWIM debug interface

Applications

  • Industrial control
  • Consumer appliances
  • Motor control
  • Smart sensors
Product Introduction: STM8S105C4T6TR Product Introduction

The STM8S105C4T6TR is a STMicroelectronics STM8S series 8-bit microcontroller in a 48-pin LQFP package. The 16MHz STM8 core with Harvard architecture and 3-stage pipeline delivers efficient instruction execution. The 16KB Flash program memory stores application code with 20-year data retention, while the 1KB true data EEPROM (300k cycle endurance) provides non-volatile storage for calibration and configuration parameters without Flash wear concerns. The 1KB SRAM supports runtime data and stack operations. The 10-bit ADC with 10 multiplexed channels and scan mode handles multi-channel analog acquisition. Communication interfaces include UART with SmartCard/IrDA/LIN support, SPI up to 8Mbit/s, and I2C up to 400kbit/s. The advanced 16-bit TIM1 timer provides 4 CAPCOM channels with 3 complementary outputs and dead-time insertion for motor control. Two general-purpose 16-bit timers handle PWM and input capture. The clock security system detects crystal failure and automatically switches to the internal RC oscillator. The SWIM (Single Wire Interface Module) provides single-pin debug and programming access. Packaged in LQFP-48 rated for -40C to +85C.

Working Principle: STM8S105C4T6TR Working Principle

The STM8 core uses a Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and data access. The 3-stage pipeline (fetch, decode, execute) achieves one instruction per clock cycle throughput for most instructions. The extended instruction set (49 instructions with 16 stack levels) provides efficient C compiler support. Four clock sources are available: external crystal (1-16MHz), external clock, internal 16MHz RC (user-trimmable to +/-1%), and internal 128kHz RC. The clock controller manages safe clock switching and the clock security system (CSS) that detects HSE failure and triggers an automatic switchover to the internal RC. The power management unit supports Wait, Active-Halt, and Halt low-power modes. The nested interrupt controller handles 32 interrupts with 6 external interrupt vectors. The Flash memory supports in-application programming (IAP) for firmware updates. The EEPROM is byte-erasable with hardware block write protection. The ADC uses a successive approximation architecture with configurable sample time per channel.

Pin Description: STM8S105C4T6TR Pin Definition and Functions

48-pin LQFP with 38 GPIO across Ports A-E. Key peripherals: TIM1 (advanced 16-bit with complementary PWM), TIM2/TIM3 (general purpose 16-bit), TIM4 (8-bit basic), UART2 (with SmartCard/IrDA/LIN), SPI, I2C, ADC1 (10-bit, 10 channels), SWIM (debug), RST (reset), VCAP (core decoupling), VDD/VSS (power), OSCIN/OSCOUT (crystal). Refer to datasheet for complete 48-pin LQFP mapping.

Application Scenarios: In which products and applications is STM8S105C4T6TR used
  • Industrial PLC and sensor module with UART RS-485, SPI display, and I2C EEPROM
  • Consumer white goods motor control with TIM1 complementary PWM and dead-time
  • Smart sensor with 10-channel ADC, EEPROM calibration storage, and clock security
  • Automotive body electronics with LIN UART, watchdog, and robust I/O design
Alternative Models: What chips are recommended as replacements for STM8S105C4T6TR
Model Manufacturer Key Difference
STM8S105C6T6TR ST 32KB Flash, more memory
STM8S003C3T6 ST 8KB, lower cost
STM32F030C8T6 ST 32-bit ARM, more performance
ATmega168PA Microchip Similar 8-bit MCU

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1