Opens in a new tab

CS5532-BSZ

24-bit 2-ch ADC, chopper-stabilized, PGA 1-64x, SSOP-20

2400

Effective Inventory

Image for reference only

Manufacturer Part:

CS5532-BSZ

Package:

20-Lead SSOP (7.2 x 5.3 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CS5532-BSZ is a Cirrus Logic 24-bit delta-sigma ADC with chopper-stabilized instrumentation amplifier, PGA gains to 64x, and SPI interface. Optimized for weight scale and industrial measurement. Packaged in 20-lead SSOP, -40C to +85C.

Key Specifications

Resolution 24 bits
Channels 2 differential
PGA 1, 2, 4, 8, 16, 32, 64
Data Rate 7.5 to 3840 SPS
Interface SPI
Package 20-Lead SSOP

Features

  • 24-bit delta-sigma converter
  • Chopper-stabilized input amplifier
  • 2 differential input channels
  • PGA gains up to 64x
  • 7.5 to 3840 SPS data rates
  • SPI serial interface
  • Calibration registers

Applications

  • Precision weight scales
  • Industrial process control
  • Strain gauge measurement
  • Instrumentation and test
Product Introduction: CS5532-BSZ Product Introduction

The CS5532-BSZ is a Cirrus Logic 24-bit delta-sigma ADC with two differential input channels and a chopper-stabilized instrumentation amplifier with programmable gain in a 20-lead SSOP package. The chopper-stabilized architecture auto-zeros the input amplifier offset and drift, providing extremely low offset drift (15nV/C typical) for DC and low-frequency precision measurements. The PGA offers seven gain settings (1x to 64x), enabling direct connection of bridge sensors with full-scale outputs as low as +/-39mV (at 2.5V reference and PGA=64). The 24-bit resolution and 19 noise-free bits (at 7.5SPS) make the CS5532 ideal for precision weight scales and industrial measurement. Data rates from 7.5SPS to 3840SPS are programmable through the SPI interface, with higher rates trading resolution for speed. Self-calibration and system calibration routines correct for internal and external offset and gain errors, storing results in on-chip calibration registers. The device operates from +/-5V dual supplies for true bipolar input measurement. Packaged in 20-lead SSOP rated for -40C to +85C.

Working Principle: CS5532-BSZ Working Principle

The CS5532 uses a fourth-order delta-sigma modulator with chopper-stabilized input stage. The chopper technique alternately swaps the input amplifier polarity at a high rate (typically the modulator clock), converting the amplifier DC offset to an AC signal that is removed by the digital filter. This reduces the effective offset and drift by the chopper gain factor. The PGA amplifies the differential input signal before the modulator, with gains implemented through capacitive switching in the input stage. The delta-sigma modulator produces a 1-bit oversampled data stream at the modulator clock rate. The digital decimation filter processes this stream to produce 24-bit output words at the selected data rate. Higher oversampling ratios (lower output rates) provide better noise performance: at 7.5SPS the output noise is 15nVrms, giving 19 noise-free bits. The SPI interface provides register-based configuration, calibration control, and data readout. Self-calibration measures and corrects internal offset and gain, while system calibration allows the user to apply known reference inputs.

Pin Description: CS5532-BSZ Pin Definition and Functions
Pin Mnemonic Description
1,2 AIN1+/AIN1- Channel 1 differential input
3,4 AIN2+/AIN2- Channel 2 differential input
5 VREF+ Reference positive input
6 VREF- Reference negative input
7 VA+ Analog positive supply
8 VA- Analog negative supply
9 A0 Address pin
10 CS Chip select (active low)
11 SDO SPI data output
12 SDI SPI data input
13 SCLK SPI clock
14 VD+ Digital supply
15,16 DGND Digital ground
Application Scenarios: In which products and applications is CS5532-BSZ used
  • Precision weight scale with load cell bridge and 24-bit resolution at 7.5SPS
  • Industrial process control pressure measurement with chopper-stabilized low drift
  • Strain gauge bridge measurement with PGA=64x for +/-39mV full scale
  • Laboratory instrumentation with system calibration for absolute accuracy
Alternative Models: What chips are recommended as replacements for CS5532-BSZ
Model Manufacturer Key Difference
CS5534-BSZ Cirrus Logic 4-channel version
CS5532-ASZ Cirrus Logic Standard grade
ADS1256 TI 24-bit, 8-ch, 30kSPS
LTC2440 ADI 24-bit, similar speed

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1