Opens in a new tab

HDC2010YPAR

Humidity+temp sensor, +/-2%RH, +/-0.2C, I2C, WLCSP-6

5400

Effective Inventory

Image for reference only

Manufacturer Part:

HDC2010YPAR

Package:

6-Ball WLCSP (1.5 x 1.5 x 0.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HDC2010YPAR is a Texas Instruments low-power capacitive humidity and temperature digital sensor with +/-2% RH accuracy, +/-0.2C temperature accuracy, and I2C output. Packaged in 6-ball WLCSP, -40C to +85C.

Key Specifications

Humidity Range 0 to 100% RH
RH Accuracy +/-2% RH
Temp Accuracy +/-0.2 C
Interface I2C
Supply 1.62V to 3.6V
Package 6-ball WLCSP

Features

  • Capacitive humidity sensing
  • +/-2% RH accuracy
  • +/-0.2C temperature accuracy
  • I2C digital output
  • 1.62V to 3.6V supply
  • 1.6uA average current at 1Hz
  • 6-ball WLCSP (1.5×1.5mm)

Applications

  • Weather stations
  • HVAC and smart thermostat
  • Wearable and portable devices
  • Consumer appliance
Product Introduction: HDC2010YPAR Product Introduction

The HDC2010YPAR is a Texas Instruments integrated capacitive humidity and temperature sensor in an ultra-compact 6-ball WLCSP (1.5×1.5mm) package. The +/-2% RH humidity accuracy and +/-0.2C temperature accuracy provide reliable environmental monitoring for HVAC, weather stations, and consumer appliances. The capacitive sensing element measures humidity by detecting the dielectric constant change of a polymer film that absorbs water vapor proportional to relative humidity. A separate silicon temperature sensor provides the temperature reading required for humidity compensation and standalone temperature measurement. The I2C digital interface eliminates analog signal conditioning, providing direct 14-bit humidity and 14-bit temperature output values. The 1.62V to 3.6V supply range supports 1.8V and 3.3V systems. The 1.6uA average current at 1Hz measurement rate enables long battery life in portable and wearable devices. The device features programmable measurement resolution and rate, with auto-measurement mode for periodic autonomous sensing. The YPAR suffix indicates WLCSP-6 tape-and-reel packaging. Packaged in 6-ball WLCSP rated for -40C to +85C.

Working Principle: HDC2010YPAR Working Principle

The HDC2010 uses a capacitive humidity sensing element consisting of a polymer film between two electrodes. The polymer absorbs or desorbs water vapor from the surrounding air, changing its dielectric constant proportionally to relative humidity. An internal capacitance-to-digital converter (C2D) measures the sensing element capacitance and converts it to a 14-bit digital value. A separate bandgap temperature sensor measures the ambient temperature with 14-bit resolution. The humidity reading is compensated for temperature effects using factory-calibrated coefficients stored in on-chip OTP memory. In auto-measurement mode, the device periodically wakes from sleep, performs a humidity and temperature measurement, stores the results in data registers, and returns to sleep, all without host intervention. The DRDY pin (or interrupt) signals when new data is available. The I2C interface reads the humidity and temperature registers, with the humidity value in 0.01% RH LSB and temperature in 0.01C LSB steps.

Pin Description: HDC2010YPAR Pin Definition and Functions
Pin Mnemonic Description
1 SCL I2C clock
2 GND Ground
3 VDD Supply (1.62-3.6V)
4 SDA I2C data
5 RST Reset (active low)
6 INT Data ready interrupt
Application Scenarios: In which products and applications is HDC2010YPAR used
  • Smart HVAC thermostat with +/-2%RH and +/-0.2C accuracy for comfort control
  • Weather station environmental monitoring with 1.6uA average power at 1Hz
  • Wearable fitness tracker humidity/temperature with 1.5×1.5mm WLCSP footprint
  • Consumer appliance (dryer, humidifier) with auto-measurement mode
Alternative Models: What chips are recommended as replacements for HDC2010YPAR
Model Manufacturer Key Difference
HDC2080 TI Similar, DSBGA-8
SHT30 Sensirion Similar humidity sensor
BME280 Bosch Humidity + temp + pressure
AHT20 Aosong Similar, lower cost

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1