Opens in a new tab

PIC16F1937-I/PT

PIC 8-bit MCU, 14KB Flash, LCD driver, mTouch, TQFP-44

2568

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F1937-I/PT

Package:

44-Pin TQFP (10.0 x 10.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC16F1937-I/PT is a Microchip 8-bit PIC MCU with 14KB Flash, 512B RAM, 256B EEPROM, LCD driver, mTouch capacitive sensing, 10-bit ADC, and 36 I/O. Packaged in 44-pin TQFP, -40C to +85C.

Key Specifications

Core Enhanced Mid-range PIC
Flash 14 KB
RAM 512 B
EEPROM 256 B
Speed 32 MHz
GPIO 36

Features

  • 14KB Flash, 512B RAM, 256B EEPROM
  • Enhanced mid-range 8-bit core
  • 96-segment LCD driver
  • Capacitive mTouch sensing
  • 10-bit ADC, 14 channels
  • 3 ECCP + 2 CCP PWM modules
  • EUSART with auto-baud

Applications

  • LCD display products
  • Consumer appliances
  • Capacitive touch interfaces
  • Motor control
Product Introduction: PIC16F1937-I/PT Product Introduction

The PIC16F1937-I/PT is a Microchip enhanced mid-range 8-bit microcontroller in a 44-pin TQFP package, featuring integrated LCD segment driver and capacitive mTouch sensing module. The enhanced mid-range core with 49 instructions and 16 stack levels provides efficient C compiler support and program flow control. The 14KB Flash program memory supports self-read-write capability for bootloader implementation. The 96-segment LCD driver directly drives glass LCD panels without external driver ICs, supporting up to 24 segment x 4 common or similar configurations. The integrated capacitive mTouch sensing module implements charge-time measurement unit (CTMU) based touch sensing without external components, supporting buttons, sliders, and wheels. The 10-bit ADC with 14 channels and voltage reference handles multi-channel analog acquisition. Three Enhanced Capture/Compare/PWM (ECCP) modules plus two standard CCP modules provide flexible PWM generation for motor control and power conversion. The EUSART with auto-baud detection simplifies asynchronous communication. NanoWatt XLP technology provides low-power sleep modes. Packaged in 44-pin TQFP rated for -40C to +85C.

Working Principle: PIC16F1937-I/PT Working Principle

The PIC16F1937 uses Microchips enhanced mid-range 8-bit architecture with Harvard structure. The program memory stores 14-bit wide instructions, while data memory uses 8-bit wide organization across banked RAM and Special Function Registers (SFRs). The internal 32MHz oscillator (8x PLL from 4MHz or 16MHz HFINTOSC) provides the system clock. The LCD driver module generates segment and common drive waveforms for multiplexed glass LCD panels. Type-A, Type-B, and Type-C waveforms are supported for different LCD glass technologies. The mTouch CTMU module applies a constant current to the capacitive touch pad and measures the charge time; a finger touch increases the pad capacitance, increasing the charge time. The ADC compares the touch measurement against a baseline to detect touch events. The ECCP modules provide enhanced PWM with auto-shutdown, dead-band delay, and PWM steering for full-bridge motor drive. The EUSART transmitter and receiver operate independently with configurable frame formats (8/9-bit) and baud rate generation from the system clock. The power management module supports Sleep, Deep Sleep, and Doze modes.

Pin Description: PIC16F1937-I/PT Pin Definition and Functions

44-pin TQFP with 36 GPIO across Ports A-E. Key peripherals: LCD segment/com drivers (SEG0-SEG23, COM0-COM3), ECCP1/2/3 (enhanced PWM), CCP4/5, EUSART (TX/RX), MSSP (SPI/I2C), ADC (14 channels, 10-bit), CTMU (capacitive touch), TMR0/2/4/6 (8-bit), TMR1 (16-bit), FVR (fixed voltage reference), DAC (5-bit). Refer to datasheet for complete 44-pin TQFP mapping.

Application Scenarios: In which products and applications is PIC16F1937-I/PT used
  • LCD display consumer product (thermostat, meter) with integrated 96-segment driver
  • Capacitive touch control panel with mTouch sensing and LCD display feedback
  • Home appliance motor control with ECCP complementary PWM and dead-band
  • Industrial instrument with 14-channel ADC, EUSART Modbus, and LCD display
Alternative Models: What chips are recommended as replacements for PIC16F1937-I/PT
Model Manufacturer Key Difference
PIC16F1936-I/PT Microchip 28-pin, fewer I/O
PIC16F1939-I/PT Microchip More Flash/RAM
PIC16LF1937-I/PT Microchip Low-voltage (1.8-3.6V)
PIC18F45K22 Microchip 16-bit, more performance

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1