Opens in a new tab

ISO7762FQDBQQ1

6-ch digital isolator, 2F+4R, 5kVrms, AEC-Q100, SOIC-16

4200

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7762FQDBQQ1

Package:

16-Pin SOIC DW (10.3 x 7.5 x 2.65 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7762FQDBQQ1 is a Texas Instruments AEC-Q100 automotive 6-channel digital isolator with 2 forward + 4 reverse channels, 150Mbps, 5000Vrms isolation, and CMTI >100kV/us. Packaged in SOIC-16 DW, -40C to +125C.

Key Specifications

Channels 6 (2F + 4R)
Data Rate 150 Mbps
Isolation 5000 Vrms
CMTI >100 kV/us
AEC-Q100 Grade 1 qualified
Package SOIC-16 DW

Features

  • 6-channel digital isolator
  • 2 forward, 4 reverse channels
  • 150Mbps data rate per channel
  • 5000Vrms isolation rating
  • >100kV/us CMTI
  • AEC-Q100 Grade 1 qualified
  • Low propagation delay (11ns)

Applications

  • Automotive CAN/LIN isolation
  • Industrial motor drive
  • Power inverters
  • Battery management systems
Product Introduction: ISO7762FQDBQQ1 Product Introduction

The ISO7762FQDBQQ1 is a Texas Instruments AEC-Q100 Grade 1 qualified 6-channel digital isolator in a 16-pin SOIC DW package. The channel configuration of 2 forward (side 1 to side 2) and 4 reverse (side 2 to side 1) is optimized for applications with bidirectional communication where one direction has more signals than the other, such as SPI peripheral interfaces (MOSI/CLK forward, MISO/CS reverse). Each channel supports up to 150Mbps data rate with 11ns typical propagation delay. The 5000Vrms isolation rating (reinforced isolation per IEC 62368-1) provides safety isolation for mains-connected applications. The >100kV/us common-mode transient immunity (CMTI) ensures reliable data transmission in noisy switching environments such as motor drives and inverters with high dV/dt switching transients. The F suffix indicates fail-safe default output high when input is disconnected or unpowered. The Q1 suffix indicates AEC-Q100 Grade 1 (-40C to +125C) automotive qualification. The ISO7762 uses capacitive coupling with on-chip isolation capacitors and high-voltage SiO2 dielectric for data transfer across the isolation barrier. Packaged in SOIC-16 DW rated for -40C to +125C.

Working Principle: ISO7762FQDBQQ1 Working Principle

The ISO7762 uses capacitive isolation technology with two on-chip metal electrodes separated by a high-voltage SiO2 dielectric. Each channel consists of a transmitter on one side of the isolation barrier and a receiver on the other. The transmitter encodes the digital input signal using an on-off keying (OOK) modulation scheme: a single-ended-to-differential converter drives the isolation capacitors with a high-frequency carrier (approximately 700MHz) when the input is high, and stops the carrier when the input is low. The receiver demodulates the signal by detecting the carrier presence and reconstructing the digital output. The differential capacitive coupling rejects common-mode transients that affect both capacitors equally, achieving the >100kV/us CMTI. The 150Mbps data rate is supported by the wideband carrier frequency and fast receiver settling. The fail-safe feature biases the receiver output high when no carrier is detected (input disconnected, unpowered, or fault), preventing undefined downstream logic states. Each isolation channel operates independently with separate transmitter and receiver circuits on opposite sides of the die.

Pin Description: ISO7762FQDBQQ1 Pin Definition and Functions
Pin Mnemonic Description
1 VCC1 Side 1 supply (2.25-5.5V)
2-4 IN_A/B Forward channel inputs
5-7 OUT_C/D Reverse channel outputs
8 GND1 Side 1 ground
9 GND2 Side 2 ground
10-13 IN_E/F Reverse channel inputs
14-15 OUT_A/B Forward channel outputs
16 VCC2 Side 2 supply
Application Scenarios: In which products and applications is ISO7762FQDBQQ1 used
  • Automotive CAN/LIN bus isolation with AEC-Q100 Grade 1 and 5kVrms safety isolation
  • Motor drive gate driver isolation with >100kV/us CMTI for high dV/dt environments
  • EV battery management system isolation with 2F+4R for SPI peripheral interface
  • Industrial power inverter signal isolation with 150Mbps and 11ns propagation delay
Alternative Models: What chips are recommended as replacements for ISO7762FQDBQQ1
Model Manufacturer Key Difference
ISO7762DQDBQ TI Non-auto, lower grade
ISO7763FQDBQ TI 3F + 3R symmetric
ADuM3462 ADI Similar digital isolator
Si8622 Silabs Similar 2-ch isolator

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1