Opens in a new tab

CYBT-343026-01

BT 5.0 module, CYW20706, 512KB flash, 12×15.5mm

2000

Effective Inventory

Image for reference only

Manufacturer Part:

CYBT-343026-01

Package:

Module (12.0 x 15.5 x 1.95 mm, castellated)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CYBT-343026-01 is an Infineon (Cypress) EZ-BT WICED Bluetooth 5.0 module with CYW20706 silicon, 512KB flash, 11 GPIO, UART/SPI/I2C/PCM, and Class 1/2 output. Packaged in 12×15.5mm castellated module, -30C to +85C.

Key Specifications

Bluetooth 5.0 Smart Ready
Silicon CYW20706
Flash 512 KB on-module
GPIO 11
Interface UART, SPI, I2C, PCM/I2S
Module Size 12 x 15.5 x 1.95 mm

Features

  • Bluetooth 5.0 qualified module
  • 512KB onboard serial flash
  • 11 GPIO with ADC and PWM
  • UART, SPI, I2C, PCM/I2S
  • Class 1 or Class 2 output power
  • Cortex-M3 processor
  • Multi-certified (FCC, CE, MIC)

Applications

  • Bluetooth audio devices
  • IoT wireless connectivity
  • Smart home and HID
  • Industrial wireless
Product Introduction: CYBT-343026-01 Product Introduction

The CYBT-343026-01 is an Infineon (formerly Cypress) fully integrated Bluetooth 5.0 Smart Ready wireless module in a 12×15.5mm castellated package. The module integrates the CYW20706 Bluetooth/BLE dual-mode silicon device, an onboard crystal oscillator, passive components, and 512KB serial flash memory for standalone operation. The Bluetooth 5.0 stack is royalty-free and qualified by Bluetooth SIG (QDID: 164447). The integrated power amplifier supports Class 1 (long range) or Class 2 (standard range) output power configuration. The Cortex-M3 32-bit processor provides sufficient processing power for application code alongside the Bluetooth stack. The 11 GPIO pins support peripheral functions including ADC, PWM, UART, SPI, I2C, and PCM/I2S audio interface. The castellated solder pad connections simplify PCB assembly without requiring a specialized BGA or QFN footprint. The module is multi-certified to FCC (US), ISED (Canada), MIC (Japan), SRRC (China), KC (Korea), NCC (Taiwan), ANATEL (Brazil), and CE (Europe) regulations, eliminating the need for separate radio certification. Packaged in 12×15.5mm module rated for -30C to +85C.

Working Principle: CYBT-343026-01 Working Principle

The CYBT-343026-01 module integrates the CYW20706 baseband processor and RF transceiver with all necessary external components. The CYW20706 implements the Bluetooth 5.0 physical layer and link layer in hardware, with the protocol stack and application running on the embedded Cortex-M3 processor. The 512KB external serial flash stores the Bluetooth stack firmware, application code, and configuration data (BD_ADDR, pairing keys, etc.). At power-up, the bootloader loads the firmware from flash into RAM and starts the Bluetooth stack. The RF front end includes a power amplifier for Class 1/2 operation, LNA for receiver sensitivity, and impedance matching network. The onboard 24MHz crystal provides the reference clock for the RF synthesizer. The module antenna is a PCB trace design optimized for the 2.4GHz ISM band. The UART interface provides the WICED application transport layer for host communication. SPI and I2C interfaces connect to application peripherals. The PCM/I2S interface supports digital audio streaming for headset and speaker applications. The ADC channels measure analog sensor inputs, and PWM outputs drive LEDs, motors, and other actuators.

Pin Description: CYBT-343026-01 Pin Definition and Functions

Castellated module with key signals: UART TX/RX/CTS/RTS, SPI CLK/MOSI/MISO/CS, I2C SDA/SCL, PCM CLK/SYNC/IN/OUT, ADC inputs, PWM outputs, 11 GPIO, VDD (1.8-3.6V), GND, RESET, BT_REG_ON. Refer to datasheet for complete pad map of the 12×15.5mm module.

Application Scenarios: In which products and applications is CYBT-343026-01 used
  • Bluetooth audio headset/speaker with PCM/I2S digital audio and Class 1 output power
  • IoT wireless sensor with UART host interface and multi-certified radio for global deployment
  • Smart home device with BLE 5.0 and 11 GPIO for sensor/actuator control
  • Industrial wireless data link with 512KB flash for application code and certified module
Alternative Models: What chips are recommended as replacements for CYBT-343026-01
Model Manufacturer Key Difference
CYBT-343027-01 Infineon Different antenna
CYBL10563 Infineon BLE-only, smaller
ESP32-WROOM Espressif WiFi+BT, different arch
BL652 Nordic nRF52832 module

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1