Opens in a new tab

TPS7A2033PDBVR

200mA LDO, 3.3V, 4.4µV RMS noise, 85dB PSRR, SOT-23-5

12000

Effective Inventory

Image for reference only

Manufacturer Part:

TPS7A2033PDBVR

Package:

5-Pin SOT-23 (DBV) (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS7A2033PDBVR is a Texas Instruments 200mA LDO with 3.3V fixed output, ultra-low noise (4.4µV RMS), 6V input, and 6.5µA IQ. Packaged in SOT-23-5 (DBV), -40°C to +125°C.

Key Specifications

Input Voltage 2.2 V to 6 V
Output Voltage 3.3 V fixed
Output Current 200 mA
IQ 6.5 µA
Noise 4.4 µV RMS (100Hz-100kHz)
PSRR 85 dB @ 1kHz
Package SOT-23-5 (DBV)

Features

  • 2.2V to 6V input range
  • 4.4µV RMS ultra-low noise
  • 85dB PSRR at 1kHz
  • 6.5µA quiescent current
  • 3.3V fixed output
  • 200mA output current

Applications

  • RF and PLL power supply
  • ADC/DAC reference voltage
  • Low-noise sensor conditioning
  • Wireless communication modules
Product Introduction: TPS7A2033PDBVR Product Introduction

The TPS7A2033PDBVR is a Texas Instruments 200mA low-dropout linear regulator with a fixed 3.3V output in a 5-pin SOT-23 (DBV) package. The device combines ultra-low 4.4µV RMS output noise (100Hz to 100kHz) with 85dB PSRR at 1kHz, making it ideal for noise-sensitive applications such as RF transceivers, PLL/VCO power supplies, and high-resolution ADC/DAC reference voltages. The 2.2V to 6V input range supports Li-ion and 5V logic rails. The 6.5µA quiescent current is among the lowest for high-PSRR LDOs, extending battery life in portable RF equipment. The 200mA output current is sufficient for most low-power RF and analog loads. The SOT-23-5 package provides the smallest possible footprint for space-constrained designs. No external noise-reduction capacitor is required to achieve the low-noise specification, simplifying the BOM.

Working Principle: TPS7A2033PDBVR Working Principle

The TPS7A20 uses a PMOS pass transistor with a low-noise bandgap reference and a carefully designed error amplifier to achieve 4.4µV RMS output noise. The bandgap reference uses a chopper-stabilized architecture to reduce 1/f noise. The error amplifier bandwidth and compensation are optimized to maximize PSRR at low frequencies while maintaining stability with ceramic output capacitors. The 85dB PSRR at 1kHz is achieved through the high loop gain of the error amplifier and the low-noise reference feedforward path. The PMOS pass element provides low dropout voltage and the rail-to-rail output capability. The 6.5µA IQ results from operating the internal bias circuits at the minimum current needed to maintain regulation and noise performance.

Pin Description: TPS7A2033PDBVR Pin Definition and Functions
Pin Mnemonic Description
1 IN Input supply (2.2-6V)
2 GND Ground
3 EN Enable (active high)
4 NC No connect
5 OUT Regulated 3.3V output
Application Scenarios: In which products and applications is TPS7A2033PDBVR used
  • RF transceiver 3.3V LDO with 4.4µV noise for minimum phase noise contribution
  • 16-bit ADC voltage reference supply with 85dB PSRR rejecting switching ripple
  • Wireless IoT module 3.3V rail with 6.5µA IQ for battery longevity
  • PLL/VCO clean 3.3V power with ultra-low noise preventing spurious tones
Alternative Models: What chips are recommended as replacements for TPS7A2033PDBVR
Model Manufacturer Key Difference
TPS7A2050PDBVR TI 5V fixed output version
TPS7A2025PDBVR TI 2.5V fixed output
LP5907MFX-3.3 TI 250mA, lower noise
AP2112K-3.3 Diodes Inc Lower cost alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1