Opens in a new tab

STM32G473RET6

Cortex-M4 170MHz, 512KB Flash, HRTIM, 5 DAC, LQFP-64

3200

Effective Inventory

Image for reference only

Manufacturer Part:

STM32G473RET6

Package:

64-Pin LQFP (10 x 10 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32G473RET6 is a STMicroelectronics Arm Cortex-M4 MCU at 170MHz with 512KB Flash, 128KB SRAM, high-resolution timer (184ps), 5 DACs, 4 op amps, 7 comparators, and math accelerator. Packaged in LQFP-64, -40°C to +85°C.

Key Specifications

Core Arm Cortex-M4 with FPU
Frequency 170 MHz
Flash 512 KB
SRAM 128 KB
ADC 5 x 12-bit (up to 4MSps)
DAC 5 x 12-bit
Op Amps 4 internal
Package LQFP-64

Features

  • 170MHz Cortex-M4 with DSP and FPU
  • HRTIM with 184ps resolution
  • 5x 12-bit ADC, 5x 12-bit DAC
  • 4 internal op amps, 7 comparators
  • CORDIC math accelerator and FMAC
  • USB 2.0 FS, CAN-FD, multiple timers

Applications

  • Digital power conversion
  • Motor control and drives
  • Solar inverters
  • Switch-mode power supplies
Product Introduction: STM32G473RET6 Product Introduction

The STM32G473RET6 is an STMicroelectronics high-performance microcontroller based on the Arm Cortex-M4 32-bit RISC core operating at up to 170MHz with floating-point unit (FPU) and DSP instructions. The device features 512KB Flash, 128KB SRAM, and an extensive analog peripheral set designed for digital power control and motor drive applications. The High-Resolution Timer (HRTIM) provides 184-picosecond timing resolution for precise PWM generation in switch-mode power supplies. Five 12-bit ADCs (up to 4MSps) enable simultaneous multi-channel sampling, while five 12-bit DACs provide multi-channel analog output. Four internal operational amplifiers and seven comparators eliminate external signal conditioning components. The CORDIC coprocessor accelerates trigonometric calculations for motor control and transformation algorithms, and the Filter Math Accelerator (FMAC) offloads digital filter computations from the CPU. The device supports USB 2.0 Full-Speed, CAN-FD, and multiple UART/SPI/I2C interfaces. Packaged in 64-pin LQFP rated -40°C to +85°C.

Working Principle: STM32G473RET6 Working Principle

The STM32G473 operates with the Arm Cortex-M4 core executing instructions from Flash or SRAM at 170MHz. The FPU accelerates single-precision floating-point operations in one cycle. The HRTIM uses a DLL-delay-line architecture clocked at 170MHz x 32 = 5.44GHz equivalent to achieve 184ps timing resolution for PWM outputs, critical for zero-crossing switching in high-frequency power converters. The CORDIC coprocessor performs coordinate rotation (sin/cos, atan2, magnitude) in hardware, offloading the CPU from trigonometric calculations common in field-oriented control (FOC) algorithms. The FMAC implements IIR and FIR digital filters in hardware, useful for current loop compensation. The internal op amps can be configured as gain stages, transimpedance amplifiers, or comparators, reducing BOM cost. The five ADCs can be triggered simultaneously by the HRTIM for coherent multi-phase current sampling.

Pin Description: STM32G473RET6 Pin Definition and Functions
Pin Group Count Description
GPIO 50 General-purpose I/O (5V tolerant)
ADC 20+ Analog inputs across 5 ADCs
DAC 5 12-bit DAC outputs
HRTIM 10 High-resolution PWM outputs
USB 3 DM, DP, VBUS
CAN-FD 2 CANRX, CANTX
Power 8 VDD, VDDA, VSS, VBAT
Application Scenarios: In which products and applications is STM32G473RET6 used
  • Three-phase motor FOC drive with HRTIM 184ps PWM and CORDIC for Park/Clarke transforms
  • Digital power supply with HRTIM multi-phase interleaved buck control and FMAC current loop
  • Solar micro-inverter with 5 ADCs for MPPT current/voltage sensing and 5 DACs for grid-tie control
  • UPS bi-directional DC-DC with internal op amps eliminating external signal conditioning
Alternative Models: What chips are recommended as replacements for STM32G473RET6
Model Manufacturer Key Difference
STM32G474RET6 ST Same with math accelerator only
STM32G483RET6 ST Higher analog accuracy grade
STM32G473CEU6 ST UFQFPN-48 package
TMS320F280049C TI C2000, 100MHz C28x, similar target

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1