Opens in a new tab

TLC5926IDBQR

16-ch LED driver, 3-50mA, ±1% match, SSOP-28

4500

Effective Inventory

Image for reference only

Manufacturer Part:

TLC5926IDBQR

Package:

28-Pin SSOP (DBQ) (9.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLC5926IDBQR is a Texas Instruments 16-channel constant-current LED driver with 3-50mA per channel, 30MHz serial interface, open/short detection, and LED error reporting. Packaged in SSOP-28, -40°C to +85°C.

Key Specifications

Channels 16
Output Current 3 mA to 50 mA per channel
Current Accuracy ±1% channel-to-channel
Serial Clock 30 MHz max
Output Voltage Up to 17V
Package 28-Pin SSOP (DBQ)

Features

  • 16 constant-current outputs
  • 3-50mA programmable current range
  • ±1% channel-to-channel matching
  • Open/short LED detection with error flag
  • 30MHz serial shift register interface
  • Thermal shutdown protection

Applications

  • LED signage and displays
  • LED matrix backlighting
  • White goods indicator panels
  • Gaming machine illumination
Product Introduction: TLC5926IDBQR Product Introduction

The TLC5926IDBQR is a Texas Instruments 16-channel constant-current sink LED driver in a 28-pin SSOP (DBQ) package. Each of the 16 outputs can sink 3mA to 50mA with ±1% channel-to-channel current matching, eliminating the need for external current-setting resistors. The output current is set by a single external resistor on the REXT pin, and all channels share the same current level. The 30MHz serial shift register interface allows daisy-chaining multiple devices for large LED arrays with minimal MCU pin usage. Each output can be individually enabled or disabled via the 16-bit shift register. The device includes open-circuit and short-circuit LED detection with an error flag output that reports which channel has a fault, enabling diagnostic monitoring in signage and display applications. The output voltage compliance extends to 17V, supporting various LED string voltages. Thermal shutdown protects the device when junction temperature exceeds approximately 160°C. The TLC5926 is ideal for applications requiring uniform LED brightness across many channels.

Working Principle: TLC5926IDBQR Working Principle

The TLC5926 uses a current-mirror architecture where a single external resistor on the REXT pin sets a reference current. This reference current is mirrored to all 16 output channels with ±1% matching accuracy. Each output is a constant-current sink that regulates the LED current regardless of the LED forward voltage variation. The 16-bit shift register controls the on/off state of each channel, clocked in via the SDI and SCLK pins. The LAT (latch) pin transfers the shift register data to the output drivers. The LED open/short detection works by comparing the output voltage against internal thresholds during the on-state: if the output voltage is too high (open LED) or too low (shorted LED), the corresponding bit in the error register is set, and the ERR flag is asserted. The 30MHz clock rate enables high refresh rates for multiplexed displays.

Pin Description: TLC5926IDBQR Pin Definition and Functions
Pin Mnemonic Description
1-8 OUT0-7 LED output channels 0-7
9 GND Ground
10 ERR Error flag output (active low)
11 SCLK Serial clock input
12 SDI Serial data input
13 LAT Latch enable
14 REXT External current-set resistor
15 VDD Logic supply (3-5.5V)
16-23 OUT8-15 LED output channels 8-15
24 SDO Serial data output (daisy chain)
25 OE Output enable (active low)
Application Scenarios: In which products and applications is TLC5926IDBQR used
  • LED video wall panel with 16-channel uniform brightness and open/short fault reporting
  • LED signage with daisy-chained TLC5926 drivers and 30MHz refresh for smooth animation
  • Industrial indicator panel with 3-50mA programmable current for mixed LED types
  • White goods display with diagnostic LED fault detection for maintenance alerts
Alternative Models: What chips are recommended as replacements for TLC5926IDBQR
Model Manufacturer Key Difference
TLC5925IDBQR TI 8-channel version
TLC59282DAP TI 16-ch, HTSSOP-28, higher current
IS31FL3731 Lumissil 9×16 matrix, I2C
MAX7219CNG ADI 8-digit, SPI, older design

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1