Opens in a new tab

MAX705CSA+T

µP supervisor, 4.65V reset, 1.6s watchdog, SOIC-8, T&R

5800

Effective Inventory

Image for reference only

Manufacturer Part:

MAX705CSA+T

Package:

8-Pin SOIC (SA) (5.0 x 4.0 x 1.5 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX705CSA+T is an Analog Devices (formerly Maxim) microprocessor supervisory circuit with 4.65V reset threshold, 1.6s watchdog timer, power-fail comparator, and manual reset. Packaged in 8-pin SOIC (SA), 0°C to +70°C, tape-and-reel.

Key Specifications

Reset Threshold 4.65 V
Reset Timeout 200 ms
Watchdog Timeout 1.6 s
Supply Current 150 µA
PFI Threshold 1.25 V
Package 8-Pin SOIC (SA)

Features

  • 4.65V precision reset threshold
  • 200ms reset pulse width
  • 1.6s independent watchdog timer
  • 1.25V power-fail comparator
  • Debounced manual reset input
  • RESET valid to VCC = 1V

Applications

  • Microprocessor reset and supervision
  • Power supply monitoring
  • Computer and controller systems
  • Intelligent instruments
Product Introduction: MAX705CSA+T Product Introduction

The MAX705CSA+T is an Analog Devices (formerly Maxim Integrated) low-cost microprocessor supervisory circuit in an 8-pin SOIC (SA) package with tape-and-reel packaging. The device integrates four critical supervisory functions into a single IC: a 4.65V precision reset output that asserts during power-up, power-down, and brownout conditions; a 1.6-second independent watchdog timer that asserts WDO if the WDI pin is not toggled; a 1.25V threshold detector for power-fail warning or low-battery detection; and a debounced manual reset input (MR) that triggers a reset pulse when pulled below 0.8V. The reset output is guaranteed valid down to VCC = 1V, ensuring the processor is held in reset during the entire power-down sequence. The 200ms reset pulse width provides sufficient time for the processor and peripherals to stabilize after power-up. The watchdog timer operates independently of the reset function, allowing software to detect and respond to code execution failures. The CSA+T suffix denotes commercial temperature range (0°C to +70°C), SOIC-8 package, and tape-and-reel packaging.

Working Principle: MAX705CSA+T Working Principle

The MAX705 monitors the VCC supply voltage with an internal voltage divider and comparator referenced to a precision bandgap. When VCC falls below 4.65V, the RESET output asserts low and remains asserted for 200ms after VCC rises above the threshold, providing a clean reset pulse during brownout conditions. The watchdog timer is a 1.6-second countdown timer that is cleared by any transition (rising or falling edge) on the WDI pin. If WDI is not toggled within 1.6 seconds, WDO asserts low. The watchdog can be connected to the MR pin to trigger a full reset on watchdog timeout. The 1.25V power-fail comparator monitors the PFI pin; when PFI drops below 1.25V, PFO goes low, providing an early warning before the main supply drops below the reset threshold. The manual reset input has an internal 250µA pull-up and is debounced with a 40µs filter.

Pin Description: MAX705CSA+T Pin Definition and Functions
Pin Mnemonic Description
1 MR Manual reset input (active low)
2 VCC +5V supply input
3 GND Ground
4 PFI Power-fail input (1.25V threshold)
5 PFO Power-fail output (active low)
6 WDI Watchdog input
7 RESET Active-low reset output (push-pull)
8 WDO Watchdog output (active low)
Application Scenarios: In which products and applications is MAX705CSA+T used
  • 5V microcontroller supervisor with 4.65V brownout detection and 1.6s watchdog for code hang recovery
  • Industrial controller with PFI early power-fail warning and manual reset button debouncing
  • Embedded system with WDO connected to MR for automatic reset on software hang
  • Computer peripheral with power-good monitoring using PFI/PFO and processor watchdog
Alternative Models: What chips are recommended as replacements for MAX705CSA+T
Model Manufacturer Key Difference
MAX706CSA+T ADI 4.40V threshold (for 4.5V systems)
MAX813LSA+T ADI Active-high RESET, same watchdog
MAX707CSA+T ADI Active-high reset, no watchdog
TPS3823-33DBVR TI 3.3V, similar function, SOT-23

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1